Products - Malaysia Top Measuring Instruments Company [60/1017]

Name	Description	Category
SEW0084-ELECTRICITY TEST BOX	FEATURES ● Wide range of operating voltage from AC 210V/50Hz to 250V/50Hz.● For checking AC voltage.● For checking a RCD tester's test current & time in mA(ms).● For checking a loop tester.● For wiring check (Phase, Neutral, Earth).● For checking continuity.● For checking insulation (The maximum is 1.2kV).● For checking UK16th edition. SPECIFICATIONS RCD Testing Range 10mA @ 150ms 30mA @ 150ms 150mA...	Test Box/Trainers
TMT112A01-30 PIECE SPECIMEN COMPARATOR ROUGHNESS COMPARATOR (30 PCS/SET) OF ROUGHNESS TESTER	Roughness Comparator (30 pcs/set)This set contains standards of the six most important machining methods in the prevalent “AA” values. These surface roughness is used to compare and determine the degree of the surface finish by comparision method and eye estimation or magnifying glass.The surface rough contast blocks is made of 45 super carbor steel except the GCr15 which is using to plat lapping the sample block. All 30 speciments are calibrated in u”AA (Arithmetical Average) and in the...	Surface Roughness Testers/Surface Profile Gauge
TMT112B04-DIGITAL ADVANCED SURFACE ROUGHNESS TESTER/SURFACE PROFILE GAUGE WITH SPECIAL HOUSING-360	TECHNICAL DATA Measurement Range The Z axis (vertical) ±80μm/±160 µm（enhanced model） The X axis (Transverse) 17.5mm Resolution The Z axis (vertical) 0．01μm/±20μm 0．02μm/±40μm 0．04μm/±80μm 0．08μm/±160μm 22 Parameter Ra,Rz,Rq,Rt，Rp,Rv,R3z,R3y,Rz(JIS),Rs,Rsk,Rsm,Rku,Rmr,Ry(JIS), Rmax, RPc, Rk, Rpk, Rvk, Mr1, Mr2) Graphic Bearing area curve, Roughness profile, Primary...	Surface Roughness Testers/Surface Profile Gauge
TMT112B03-DIGITAL LED ROUGHNESS TESTER/SURFACE PROFILE GAUGE WITH SPECIAL HOUSING-200	The portable roughness measuring instrument is a new product of our company, it is a portable stylus surface roughness shape measuring instrument, applicable to the workshop testing station, laboratory, metrology room environmental detection. Measurement of parameters in line with international standards of the United States, Germany, Japan and is compatible with Britain and other industrial developed country standards. Measurement results can be digital and graphic LCD display, also can be...	Surface Roughness Testers/Surface Profile Gauge
TMT112B02-DIGITAL LED ROUGHNESS TESTER/SURFACE PROFILE GAUGE WITH SPECIAL HOUSING-140	Features:●Pocket-size & economically price●Useing the high speed microprocessor DSP;●Using the OLED screen,bright and without visual angle●Data ourput USB port●Large measuring range suitable for most materials●Measures flat,outer cylinder and sloping surface●Both Ra and Rz parameters in one instrument●Works on 3.7V rechargeable lithium-battery, work while charging●Real time battery indicator Technical Specifications: Roughness...	Surface Roughness Testers/Surface Profile Gauge
AMI019-DIGITAL SURFACE ROUGHNESS TESTER GAUGE METER WITH PROBE FOR RA, RZ, RQ, RT-132B	Product Description The Surface Roughness Tester is widely used in production site to measure surface roughness of various machinery-processed parts, calculate correspondingparameters according to selected measuring conditions and clearly display all measurement parameters. Product Feature * Be compatible with four standards of ISO, DIN, ANSI and JIS. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by...	Surface Roughness Testers/Surface Profile Gauge
TMT113-Analog Surface Profile Gauge Roughness Tester	Features: MaxRange 0-5mm, pre-set to 500µm which can be changed. Resolution 0.001mm; Accuracy; ±2µm MaxRange 0.2inch, Resolution 0.00005inch. Available as metric/imperial. The reading maximum range is user adjustable.	Surface Roughness Testers/Surface Profile Gauge
TMT112-Digital Surface Profile Gauge Roughness Tester	Features: Pocket-size & economically price Useing the high speed microprocessor DSP; Using the OLED screen,bright and without visual angle Data ourput USB port Large measuring range suitable for most materials Measures flat,outer cylinder and sloping surface Both Ra and Rz parameters in one insrument Works on 3.7V rechargeable lithium-battery,work while charging Real time battery indicator Technical Specifications: Roughness...	Surface Roughness Testers/Surface Profile Gauge
CAX0083-CHAUVIN ARNOUX AEMC DTR-8510 TRANSFORMER RATIOMETER	When connected to a non-energized transformer, this digital transformer ratiometer accurately measures primary to secondary turns ratio, while simultaneously displaying polarity and excitation current. The DTR is fully automatic and uses an ANSI/IEEE compliant test method. AEMC Instruments 8510 Offers The AEMC DTR 8510 Digital Transformer Ratiometer is a portable digital transformer ratiometer designed for on-site testing of power, potential and current transformers. No user calibration,...	Transformer Turns Ratiometers
PRO0051-1660 TRANSFORMER TURN RATIO METER WITH 1 YEAR WARRANTY	Product Features Measurements of 1Φand 3ΦTransformer/VT/CT Turns Ratio. VT/PT ratio 0.8~10000, CT ratio 0.8~2000. Graphical and Literal Illustration of Measurements and Connections with Large Back-lighted Dot Matrix 240 x 128 LCD. Display Test Data with Nameplate Transformer Values for Easy Interpretation. Ten Test Frequencies (50~400Hz). Display Turns Ratio, Deviation, Secondary Output, Excitation Voltage and Current, Phase Angle and Nameplate Transformer/VT/CT Values in one...	Transformer Turns Ratiometers
VIB001-VIBROCK V9000 SEISMOGRAPH/Ground Vibration Monitor (REPLACED V901)	The all new V9000 Seismograph is designed and manufactured by Vibrock Ltd to meet the needs of our customers. The V9000 Seismograph is a battery powered portable vibration monitor, designed for monitoring blasting, piling, demolition, construction and traffic vibrations. It can also monitor dominant frequencies as well as air overpressure from blasting, using the optional microphone. New features include internet based remote capability, frequency plotting in accordance with BS...	Seismograph
TTC002 KKI RTU202 IP68 RATED LOW POWER LOGGER/ TELEMETRY COMPLETE W SOLAR PANEL AND BATTERY	Specification Model : RTU202 GSM Modem: LTE 4G GPS 50 Channel Inputs and Outputs 2 Analog 4-20mA, (0-5V), 6 Channel Digital Contact/RainGauge, 1 Aud Relay Output (Contact @1.1A)	RTU Telemetry Unit
TTC001 KKI RTU201 SMS EMAIL ALERT MODULE RTU IP65 LOGGER WIRELESS TELEMETRY WITH SOLAR PANEL/BATTERY	Model : RTU201 Grapic LCD Display128 x 64 pixel Backlit GSM MODEM:Enfora Quad Band GSM/GPRS Class 10 Inputs and Outputs:8 Protected Dry Contact Input2 Analog Input (0-5V/4-20mA/0-25mA) [Std]–OR —1 NTC Thermistor Sensor	RTU Telemetry Unit
CIA051A - ELECTRONIC WALL SCANNER WALL DEPTH DETECTOR W/ BACKLIGHT FIT WOOD METAL 1 YR WARRANTY	Specification: Product model: CIA051A Product material: ABS Product function: wall detection function Appearance: Two-color mold, sturdy and durable Screen type: 2.4-inch high-definition color screen, resolution 240320 Charging method: USB charging Battery type: polymer lithium battery (390mAh) (built-in lithium battery shipped) Voice Broadcast: Live Voice Broadcast Product size: 6.32.513.9cm Packing size: 1810*7cm Product weight: 200g Product gross weight: 220g Product...	Wall scanners
AMI013C-1000K DIGITAL WELDING PRESSURE GAUGE-1000KGF	Product Description Our latest type of microelectronic digital display instrument. It has the input end of a dynamometer (pressure) and a weight transducer (weight) strain gauge. It is used in the latest static and dynamic measurement systems, such as material test machines,...	Welding pressure gauges
AMI013B-100K DIGITAL WELDING PRESSURE GAUGE-100KGF	Product Description Our latest type of microelectronic digital display instrument. It has the input end of a dynamometer (pressure) and a weight transducer (weight) strain gauge. It is used in the latest static and dynamic measurement systems, such as material test machines,...	Welding pressure gauges
AMI013-10K DIGITAL WELDING PRESSURE GAUGE-10KGF	Product Description Our latest type of microelectronic digital display instrument. It has the input end of a dynamometer (pressure) and a weight transducer (weight) strain gauge. It is used in the latest static and dynamic measurement systems, such as material test machines,...	Welding pressure gauges
SEW0020*** Series-ED-205 ED205 AC/DC ANALOGUE VOLTMETER/AMMETER/GALVANOMETER BENCHTYPE PANEL METER	FEATURES Dimension：91(L) × 103(W) × 100(D)mm Deflection Angle : 90° Scale Length：Approx. 65mm Terminal：4mm socket captive head, suitable for wire or pin-type test lead. Material And Color：Acrylic resin meter cover, white scale plate, plastic stand in black. Safety Standard：IEC/EN 61010-1 CAT Ⅱ 300VEN 61326-1 EN 61000-4-2 EN 61000-4-3	Panel meters
SEW0123P03-ST2000 3803--5/25A 60-300V POWER FACTOR METER	FEATURES Principle : Phase angle sensing transducer Meets CE Rated Accuracy : ±3% phase angle Scale :Power Factor：Lead 0 – 0.3 – 1.0 – 0.3 – 0 LagPower Angle： Lead 90° – 0° – 90° Lag Effective Power Factor Measuring Range :Lead 0.5 – 1.0 – 0.5 Lag Scale Length : Approx. 135mm(5-3/8”) Frequency Influence : Within ±1.5° phase angle at 45 to 65Hz	Panel meters
SEW0123P02-ST2000 3802--1/5A 60-300V POWER FACTOR METER	FEATURES Principle : Phase angle sensing transducer Meets CE Rated Accuracy : ±3% phase angle Scale :Power Factor：Lead 0 – 0.3 – 1.0 – 0.3 – 0 LagPower Angle： Lead 90° – 0° – 90° Lag Effective Power Factor Measuring Range :Lead 0.5 – 1.0 – 0.5 Lag Scale Length : Approx. 135mm(5-3/8”) Frequency Influence : Within ±1.5° phase angle at 45 to 65Hz	Panel meters

Start
Prev
55
56
57
58
59
60
61
62
63
64
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

Sub Categories