You have 0 items in your cart.
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK LCR-8000G Series | Features: ※ Wide Test Frequency 20Hz ~ 10/5/1MHz ※ 0.1% Basic Accuracy & 6 Digits Measurement Resolution ※ Large LCD Display with Intuitive Interface※ Full Measuring Functions with DUT V/I Monitor※ PASS/FAIL Function ( abs, % or delta) with Judgment Alarm※ DC Resistance Measurement ※ Multiple Step Mode※ Standard RS-232C/GPIB Interface※ Optional DC Bias box | LCR Meters |
|
|
|
GW INSTEK LCR-800 Series | Features: ※ Test Frequency: 12Hz~200kHz (LCR-821) 12Hz~100kHz (LCR-819/829) 12Hz~10kHz (LCR-817/827) 100Hz~2kHz (LCR-816/826) ※ 0.05%~0.1% Basic Accuracy ※ 100 Sets Memory for Save/Recall of Settings ※ R/Q, C/D, C/R, L/Q, Z/θ, L/R Test Modes ※ Absolute Value,ΔValue, and Δ% Measurement Display ※ 240 x 128 dot Matrix LCD Display ※ Displays Condition and Test Result Simultaneously ※ Standard Interface: RS-232C (LCR-821)/ Handler (LCR-829/827/826)※ Optional Interface: RS-232C... | LCR Meters |
|
|
|
GW INSTEK LCR-900 Series | Features: * 20,000/2,000 Counts Dual Display* Test Frequency : 100/120Hz/1/10/100kHz depends on model* Auto LCR Mode for DUT Measuring* 0.2% Basic Accuracy* Measurement Parameter : L,C,R,D,Q,ESR,θ,DCR* Parallel/Series Testing Mode* Sorting Mode for Quality Control* 2Wire or 5Wire Measurement Available* Data Hold and Zero Mode Supported* Max and Min (LCR-916 only)* Auto Range, Auto Backlit* Low Battery Indication* Auto Power off* Data Collection or AC power operation (Optional) | LCR Meters |
|
|
|
GW INSTEK GPT-9900 Series | Features: ※ 500VA AC Test Capacity※ 240x64 Ice Blue Dot matrix LCD※ Sweep Function for DUT characteristic analysis※ Insulation resistance measurement up to 50GΩ(GPT-9903/9904)※ Manual/Auto Mode※ Function Key for quick selecation※ High intensity flash for caution & Status indication※ Safety INTERLOCK function※ Zero Crossing Turn-on Operation※ Controllable Ramp-up Time※ True RMS Current Measurement ※ High resolution: 1uA for measuring current, 2V for setting... | Safety Testers |
|
|
|
GW INSTEK GPT-9800 Series | Features: ※ 200VA AC Test Capacity※ 240x64 Ice Blue Dot matrix LCD※ Manual/Auto Mode※ Function Key for quick selecting※ High intensity flash for Caution & Status indication※ Safety INTERLOCK function※ Zero Crossing Turn-on Operation※ Controllable Ramp-up Time※ True RMS Current Measurement ※ High resolution: 1uA for measuring current, 2V for setting voltage※ PWM amplifier to enhance the power efficiency and reliable testing ※ Max. 100 memory block for test condition... | Safety Testers |
|
|
|
GW INSTEK GPT-9600 Series | Features: ※ 100VA AC Test Capacity※ 240x48 Ice Blue Dot matrix LCD※ Auto W-I or I-W Mode※ ARC Detection※ True RMS Current Measurement※ Zero Crossing Turn-on Operation※ Safety INTERLOCK function※ PWM amplifier to enhance the power efficiency and reliable testing ※ Automatically Switching Input Source for Universal Input Voltage※ Interface : Remote terminal and Signal I/O | Safety Testers |
|
|
|
GW INSTEK GLC-9000 | Features: ※ Touch Panel with Color LCD Display※ 9 Different Measurement Network to Simulate the Resistance of Human Body※ 8 Different Types of Leakage current for Medical & General Electrical Equipment※ Various Leakage Current Measuring Mode： DC/AC/AC+DC/AC Peak ※ Upper & Lower Limitation for PASS/FAIL Judgment※ Meter Mode with SELV/CONV Function※ 50 Preset Test Conditions Conform to IEC 60990; 30 Sets Memories for Customer Defined※ Various Standard Interfaces：... | Safety Testers |
|
|
|
GW INSTEK GOM-802 | Features: ※ 30000 Counts Display ※ High Accuracy 0.05% ※ Hi/Lo Comparator and Limit Percent Setting ※ Measurement of REL, Actual and % Value ※ Continuous or Triggered Measurement Mode ※ Temperature Compensation and Measurement ※ Four-Terminal Measurement Technique ※ Auto-Recall Last Setting After Power OFF and ON Again ※ Alarm Setting for PASS/FAIL ※ Scan, Handler Interface(Standard) ※ Manual or Autoranging ※ RS-232C+GPIB (Option) | Other Application Instruments |
|
|
|
GW INSTEK GOM-801H | Features: ※ 3 1/2 Digits 0.5" LED Display※ Measures from 20mΩ ~ 20kΩ in 7 Ranges ※ 1A High Test Current ※ High Resolution 10uΩ ※ Hi/Lo Comparator Indicator and Buzz Alarma | Other Application Instruments |
|
|
| GW INSTEK GUT-6000B | Features: ※ Loop Test ※ Auto-Search ※ Seif-Diagnosis ※ Over-Load Protection ※ Measures 1800 Kinds of Device ※ 54/74 Series TTL ※ 4000 and 4500 Series CMOS ※ Test Socket: 28 Pin | Other Application Instruments |
|
||
|
GW INSTEK GUT-6600A | Features: ※ Easy-Operating Tester, Particularly be Designed for the Digital IC ※ Supported Device：74/54/40/45 Serial, Drive 2xxx ※ Small, Portable, Light and Power-Saving, Usable With Battery ※ Average Search Time: 0.6 Second ※ Display: 16 Characters in 1 Line LCD ※ Test Pins: 14~24 Pins | Other Application Instruments |
|
|
|
GW INSTEK GAD-201G | Features: ※ Automatic level & distortion measurements ※ Auto or Hold function selectable ※ 0.1% ~ 100% in 7 distortion measuring ranges ※ 20Hz ~ 20kHz in 3 continuous ranges ※ 400Hz, 1kHz, 10kHz 3 frequency spots ※ 1mVrms ~ 300Vrms in 12 ACV measuring ranges | Other Application Instruments |
|
|
|
GW INSTEK GVT-427B/417B | Features: ※ 300μV Full Scale Sensitivity ※ Measurement Frequency: 10Hz ~ 1MHz ※ Measurement Amplitude: -70dB ~ +40dB in 12 Ranges ※ Dual Channel (GVT-427B)※ CE Approved (GVT-417B) | Other Application Instruments |
|
|
|
GW INSTEK GFC-8270H/8131H | Features: ※ Frequency and Period Measurement※ High Resolution at Both High and Low Frequency※ 0.01Hz~2.7GHz Frequency Range(GFC-8270H)※ 0.01Hz~1.3GHz Frequency Range(GFC-8131H)※ 10mV rms High Sensitivity ※ 100nHz Resolution for 1Hz Input ※ Variable Trigger Level Control※ Microprocessor Controlled Intelligent Counter(only GFC-8270H) | Other Application Instruments |
|
|
|
GW INSTEK GFC-8010H | Features: ※ 10Hz ~ 120MHz Range ※ 8 Digits Display (0.3"LED) ※ 15mV rms High Sensitivity ※ 5PPM High Stability Time Base ※ Frequency and Period Measurement ※ Low Pass Filter Function ※ Over-Flow Indicatot | Other Application Instruments |
|
|
|
GW INSTEK GPM-8212 | Features: ※ Simultaneous Display of W, A, V ( PF or Hz ) ※ True RMS V, A, W ※ Auto Calibration Via Computer ※ Max. / Min. / Hold Function ※ High Immunity to External Noise ※ CT Ratio (1 ~ 9999) ※ PT Ratio (1 ~ 9999) | Other Application Instruments |
|
|
|
GW INSTEK GLP-1A | Features: ※ Combining a Logic Probe and Pulser Combined into One ※ Probe for Troubleshooting Digital Circuits ※ Operating Voltage: 4VDC ~ 18VDC※ Maximum Input Signal Frequency: 50MHz ※ TTL: Logic “1”>3.0V±0.25V, Logic”0”<0.75±0.25V ※ CMOS: Logic “1”>60%VCC±5%, Logic”0”<15%VCC±5% ※ Minimum Detectable Pulse Width: 10nsec ※ Pulser: Sync input impedance 120kΩ ※ Pulse Repetition Rate: Switchable 0.5/400Hz ※ Pulse width: 10μsec ※ Dimensions... | Other Application Instruments |
|
|
|
GW INSTEK ATA-002 | Features * Wideband, Upper Resonant Frequency 1GHz* Primary Sensor Type : H-Field* Weight (kg) : 0.25* For : GSP-Series(An addirional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers) | Other Application Instruments |
|
|
|
GW INSTEK GTL-205 | Features: Temperature probe adaptor with thermocouple (K-type)Length : approx. 1000mm ※ Suitable for : GDM-8261A/8255A/8251A/8342 | Test Leads / Cables / Probes |
|
|
|
GW INSTEK GHT-114 | Features: * Withstanding Voltage/ Insulation Resistance Test Lead for GPT-9900/9800 Series * Length : 1000mm | Test Leads / Cables / Probes |
|