Name	Description	Category
Fluke AS400 Probe Accessory Kit for VPS400 Probes	Probe Accessory Kit for VPS400 Probes	Test Leads, Probes, Clips
Fluke BP980 Double Banana Plug Kit	5 pair (red, black) of double 4 mm banana plugs Each plug has 3.1 mm holes for mounting wires and components Brass plugs/jack, beryllium copper springs 30 V rms or 60 V DC, 15 A One year warranty	Test Leads, Probes, Clips
Fluke FTP-1 Fused Test Probe Set	Fused test probe set Additional protection when measuring voltage or current Fits any Fluke modular test leads	Test Leads, Probes, Clips
Fluke HC120 Hook Clips (Set of 2: Red, Gray)	Maximum Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Wire Size: 2.5mm Contact Material: Nickel plated steel	Test Leads, Probes, Clips
Fluke HC200 Hook Clip set 2 red, 2 gray	Set of four Hook Clips (two red and two gray). Compatible with VPS100, VPS101, VPS121 and all VPS200 series probes Maximum Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Wire Size: 2.5mm Contact Material: Nickel plated steel	Test Leads, Probes, Clips
Fluke MA190 Accessory Kit for Medical and Video Applications	Kit Includes: 50 Ohm BNC insulated feedthrough terminator 50 Ohm BNC terminator with 10:1 signal attenuation 1 Ohm current shunt for current measurements Safety-designed BNC cable, 1.5 m (5 ft) Insulated BNC (f) to 4mm-banana plug adapter Dual 4 mm banana receptacles (1 red, 1 black)	Test Leads, Probes, Clips
Fluke RS400 Probe Accessory Replacement Kit For VPS400 Series Probes	Compatible with: VPS410B, VPS410G, VPS410R, and VPS410V	Test Leads, Probes, Clips
Fluke STL90 Shielded Test Lead Set	Shielded test lead set contains: Two shielded test leads: - Cable length: 1.5 m - Safety designed shrouded banana input - Safety designed insulated BNC connector - Maximum signal voltage: 300 V - Maximum voltage to ground: 600 V per IEC 1010-2-031 CAT III - Maximum current 3 A Two Ground leads: - Cable length: 250 mm - Maximum current 3 A - Safety designed shrouded banana jacks Two 4 mm Tip adapters, 30 V Two 2 mm Tip...	Test Leads, Probes, Clips
Fluke STL120-III Shielded Test Leads	Length: 1.2m (48”) Bandwidth: 12,5 MHz Maximum Signal Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031 Maximum Current: 1A	Test Leads, Probes, Clips
Fluke TAS90 Shielded Test Lead Accessory Set	Set contains 30 V CAT II rated: Four 4mm adapters for banana plug (1 red, 1 gray, 2 black) Four Backprobe pins for banana plug, 1 A (1 red, 1 gray, 2 black)	Test Leads, Probes, Clips
Fluke TL220 SureGrip™ Industrial Test Lead Set	Handy all-in-one kit that includes : AC220 SureGrip™ Alligator Clip Set TP220 SureGrip™ Test Probe Set TL222 SureGrip™ Silicone Test Lead Set (right to right) One year warranty	Test Leads, Probes, Clips
Fluke TL221 SureGrip™ Test Lead Extension Set	One pair (red, black) of silicone insulated leads with straight connectors on both ends Reinforced strain relief Includes one pair (red, black) of female couplers Extends test leads by 1.5 m 600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed One year warranty	Test Leads, Probes, Clips
Fluke TL223 SureGrip™ Electrical Test Lead Set	Handy all-in-one kit that includes : AC220 SureGrip™ Alligator Clip Set TP1 Slim-Reach™ Test Probes (flat bladed) TL224 SureGrip™ Silicone Test Lead Set (straight to right) One year warranty	Test Leads, Probes, Clips
Fluke TL223-1 Suregrip Electrical Test Lead Set	Kit Includes: AC220 SureGrip Alligator Clips TP220 SureGrip Industrial Test Probes TL224 SureGrip Silicone Test Lead Set (straight to right) One year warranty	Test Leads, Probes, Clips
Fluke TL224 SureGrip™ Insulated Test Lead Set	DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Right angle connector on one end and straight connector on the other Reinforced strain relief 1.5 meter silicone-insulated wire resists heat & cold CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty	Test Leads, Probes, Clips
Fluke TL225 SureGrip™ Stray Voltage Adapter Test Lead Kit	It makes sure the meter has a low input impedance that eliminates stray voltages On energized wires, the meter will indicate the real voltage On non-energized circuits the meter will read close to zero (even if there are stray voltages) It can be used with all modern meters with standard input spacing Rated CAT III 1000 V, CAT IV 600 V One year warranty Kit includes: SV225 Stray Voltage Eliminator TL224 SureGrip™ Silicone Test Lead Set (right to straight) TP220 SureGrip™...	Test Leads, Probes, Clips
Fluke TL238 SureGrip™ Test Lead Set for High Energy Environments	The kit includes: TP238 SureGrip™ Insulated Test Probe Set TP280 SureGrip™ Test Probe Extender TL224 SureGrip™ Silicone Right Angle/Straight Test Lead Set	Test Leads, Probes, Clips
Fluke TL26A 60 in. 5-Way Test Lead Set	5 ways to connect: U-shaped nose for blade-shaped terminals; Notched jaw for gripping screw heads, bare wire or terminals; Serrated teeth for gripping threaded or wire-wrapped terminals; Cluster of sharp needles for piercing small gauge (#22-#28 AWG) wires; Large piercing needle for penetrating larger gauge wires.	Test Leads, Probes, Clips
Fluke 27 Heavy Duty Test Lead Set	DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Heavy duty EPDM insulation Length 1.5 m CAT III 1000 V, 10 A rating. UL listed One year warranty	Test Leads, Probes, Clips
Fluke TL28A Automotive Test Lead Set	Large jaws, long leads and a piercing probe Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth Large piercing needle for penetrating larger gauge wires 1.5 m (60"), silicone-insulated leads, useable from -80 °C to +150 °C (-112 °F to +302 °F) Rated for 30 V, 10 A. One red, one black Flexible silicone insulated leads are heat and cold resistant Cat I 30 V, 10 A	Test Leads, Probes, Clips

Start
Prev
148
149
150
151
152
153
154
155
156
157
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

Sub Categories