|
|
Fluke 376 True-rms AC/DC Clamp Meter with iFlex
|
|
Part clamp meter, part clamp marvel.
With the Fluke 376 Clamp Meter with iFlex, you’ll be ready for anything.
|
May 2013
|
|
|
|
CEM1100 AC Current and Voltage Datalogger
|
|
Supplied complete with Windows Software and USB Lead (Compatible with XP, Vista, Windows 7 32 & 64 Bit)
Large capacity for storing and measuring data points
True RMS measurement
Dual-channel input
Data and wave memory (256,000)
AC current clamp probe
CAT III 600V safety-rated
LCD display
User-selectable measurement cycle (1 second to 24 hours)
Download data through USB interface
Maximum, Minimum, and Peak Mode
Time, date, and alarm display
Manual and automatic... |
May 2013
|
|
|
|
TES0013-1356 Sound Calibrator
|
|
94dB and 114dB Sound Calibration at 1KHz
Accurate and Simple to use
Fits 1", 1/2" or 1/4" diameter microphone
|
Sound calibrator
|
|
|
|
TEN590-TM-100V2 SOUND LEVEL CALIBRATOR FOR CLASS 2 SOUND LEVEL METER
|
|
Setting standard sound level at 94dB and 114dB.According Standard ANSI S1 4-1984 and IEC 942 1988 Class 21/2 inch microphone adapters provided.Low battery indicator.
Class 2 Dual Level Calibrator
|
Sound calibrator
|
|
|
|
TEN591-ST-120 Class1 Sound Level Calibrator
|
|
IEC 60942:2003 Class1/ANSI S1.40-1984. ● Output sound level : at 94dB and 114dB. ● Frequency : 1KHZ ±1%, Class1, A ● Accuracy : 94±0.3dB 114±0.5dB Specifications ● Sound pressure levels : at 94dB and 114dB. ● For 1/2" condenser microphone calibration. ● Low battery indication. ● Harmonic waves distortion ±3%. ● Output feedback detection. ● Power: 9V battery 006P or IEC6F22 or NEDA 1604 ● Operation environments : 23.0oC ±3oC <85%RH ,850mbar~1050mbar, ≦2000M |
Sound calibrator
|
|
|
|
CEM0001 KKINSTRUMENTS PITOT TUBE ANEMOMETER/DIFFERENTIAL MANOMETER SET - AIRFLOW (SAME AS HD350)
|
|
Product Description
1.Larger LCD display with backlight.
2.Relative time clock on MAX MIN and AVG provides a time
reference for measurement.
3.Pressure, velocity or air flow measurement provides Zero Adjust.
4.Display pressure, Air velocity or air flow plus environment
5.Temperature simultaneously.
6.Easy to calculate the area of a rectangular or circular duct.
7.USB interface, USB to UART Bridge Controller..
8.Low battery indication, and Auto Power Off mode (Sleep mode)... |
Pitot tubes anemometers
|
|
|
|
LUT0411-PITOT TUBE ANEMOMETER (DIFF PRESSURE AND AIR VELOCITY ONLY)
|
|
Product Introduction
The offers precise wind speed and pressure measurements, suitable for industrial environments requiring accurate data. It also provides data storage and multifunctional display features.
Measurement Specification
Wind Speed Range : 4.1 to 100.0 m/s ±1%FS
Pressure Range : ±200 mbar ±2%FS
Wind Speed Unit Options : m/s, Km/h, mph, knot, ft/min
Pressure Unit Options : mbar, psi, kg/cm², mm/Hg, inch/Hg, hPA, KPA, meter/H2O, inch/H2O, Atmosphere
Display Screen... |
Pitot tubes anemometers
|
|
|
|
RIX444 PLUS PRO HANDHELD PITOT TUBE AIRFLOW MEASUREMENT SET (MAX 105M/S UNDER 500C)
|
|
Air Velocity/Flow/Differential ManometerPitot Tube measures Air Velocity/Flow
Applications:Clean room, Compression cooling systems, Air filter monitoring, Pumps, Fan control, Pneumatic controls, Hospital, Duct airflow, Differential pressure monitoring, HVAC...etc.
Features:
Anemometer measurements for Air Velocity, Air Flow and Wind Pressure(VF-5200+ series)
Manometer(Differential Pressure)Measurements
8 selectable units of pressure measurement
±0.25% F.S High... |
Pitot tubes anemometers
|
|
|
|
LUT0064 PH-220S Soil/Semi Solid product pH meter
|
|
* Complete set with separate soil, spear tip pH electrode and pH 4 and pH 7 standard solution.
* Complete set with separate soil, spear tip pH electrode and pH 4 and pH 7 standard solution. * Meter : 0 to 14 pH x 0.01 pH. Electrode : 1 to 13 pH. * Auto calibration for pH 4, pH 7 or pH 10. * Temp. adjustment is not necessary. * IP-65 water proof. * Build in reverse display button. * DC 1.5V battery ( UM-4, AA ) x 4, long life. * Spear tip pH electrode, ideal for penetration pH measurements into... |
pH Meters
|
|
|
|
LUT0175 CL-2006 CHLORINE METER
|
|
CHLORINE METER * Free chlorine, total Chlorine measurement. * Range : 0 to 3.5 mg/L (ppm). * Range : Auto range. * Measuring principal : Photo meter method. * Light source : LED, 525 nm. * Record Max, Min. value. * 10 PCs Free and Total powder DPD are included. * Free and total 1.0 mg/L standard solution are the standard accessories. * Power : 1.5 V battery (UM-4/AAA) x 6 PCs. * The measuring method is an adaptation of the USEPA Method 330.5 and Standard Method.
|
Chlorine
|
|
|
|
LUT0065 PH-222 Handheld pH meter
|
|
* 0 to 14.00 pH. * ATC (auto temperature compensation).
PEN PH METER * 0 to 14.00 pH. * ATC (auto temperature compensation). * Auto calibration for pH 4, pH 7 or pH 10. * Meter with pH electrode, all in one. * IP-67, water proof. * Easy replacement for the pH electrode. * Pen type, easy carry out. * Data logger. * pH 4, pH 7 standard solution are included. * DC 1.5V battery ( UM-4, AA ) x 4, long life |
pH Meters
|
|
|
|
GON105A-FTC-420 FREE & TOTAL CHLORINE DIGITAL METER - EPA APPROVED DPD METHOD.
|
|
Features:
Microprocessor based for fast and accurate measurements.
EPA approved DPD method.
Large LCD 45 x 25 mm display for reading convenient.
Memory function stores and recalls up to 150 points.
Low battery alarm and auto shut off after 10 minutes of non use.
Specifications:
Range
0 ~ 3.50 ppm
Resolution
0.01 ppm
Accuracy
± 0.03 + 1 digit at<2.00 ppm
± 3% FS + 1 digit at>2.00 ppm
Response
<5... |
Chlorine
|
|
|
|
TST0306 205 T-Shape Penetration pH meter
|
|
Instrument set: One-hand pH/°C measuring instrument with penetration probe, storage cap, belt/wall holder
A robust food penetration pH/°C measuring instrument with automatic temperature compensation. The robust penetration measuring tip is interchangeable and not affected by dirt and dust thanks to the hole diaphragm.
Combined penetration tip with temperature probe
Measuring tip can be changed by user
Maintenance-free gel electrolyte
Backlit display
Audible key feedback
2 line... |
pH Meters
|
|
|
|
LUT0101 PH-220 Handheld Cable pH meter
|
|
* Separate pH electrode, easy for general purpose and remote measurement. * 0 to 14.00 pH. * Auto calibration for pH 4, pH 7 or pH 10.
* Separate pH electrode, easy for general purpose and remote measurement. * 0 to 14.00 pH. * Auto calibration for pH 4, pH 7 or pH 10. * Temp. adjustment is not necessary. * IP-65 water proof. * Pen type, easy carry out. * Complete set with separate pH electrode (PE-11) and pH 4, pH 7 standard solution. * Build in reverse display button. * DC 1.5V battery... |
pH Meters
|
|
|
|
EXT0211- CL203 Extabs - Reagent Tablets 10 Pack 100 Tests CHLORINE REAGENT TABLETS (10PK)
|
|
Extabs - Reagent Tablets 10 Pack = 100 Tests
1 tablet per test
Foil packaging provides very stable environment with long shelf life
No messy powder reagents
No dosing equipment required
10pk (100 tests)
Approved by the U.S. EPA as an acceptable alternative method for 40 CFR Part 136 waste water compliance monitoring
ExTab™ Reagent tablets (10pk - 100 tests)Reagent tablets for use with ExStik® Chlorine Meter
These reagent tablets are for use with Extech chlorine meters. Using... |
Chlorine
|
|
|
|
TST0031 206-ph1 handheld meter (Germany)
|
|
One-hand pH/°C measuring instrument, pH1 probe head for liquids, storage cap with gel, TopSafe and belt/wall holder
The pH measuring instrument for fast checks on liquids. The combination of pH immersion tip and temperature probe for fast and efficient temperature compensation is unique. The Testo pH probe is leak-proof, maintenance-free, robust and not affected by dirt thanks to the large volume of gel electrolyte and the dual wall diaphragm. |
pH Meters
|
|
|
|
IM-32P Specific ion/pH Meter
|
|
-Simultaneous pH and ion measurement -1000 point data memory x 2 channel -LCD display for all parameters -Data print-out capability -Automatic Time interval Measurement -Water proof housing -Data hold function and auto power off -Rugged probe design for field measurement |
pH Meters
|
|
|
|
LUT0229-PH-230SD DATALOGGING PH METER
|
|
* Real time data recorder, save the data into the SD memory card and can be download to the Excel, extra software is no need. * pH : 0 to 14.00 pH. * mV (ORP) : -1999 mV to 1999 mV. * Manual temperature compensation. * ATC (automatical temperature compensation) via optional Temp. probe (TP-07). * Auto calbration for pH 7.0, pH 4.0 and pH 10.0. * Data hold, Record (Max., Min.). * RS232/USB computer interface. * Patented. * Patent: Taiwan, China, Japan, Germany, USA pending. |
pH Meters
|
|
|
|
ATA0022-DPH-2 Handheld pH meter - Japan
|
|
We are proud to introduce our new digital pH meter, DPH-2. Like all ATAGO products, the DPH-2 is extremely easy to use. It has a compact, portable design and is water resistant ( IP67 ), so it can be cleaned under running water and submersed into water without any negative effects. It has an Automatic Temperature Compensation mechanism that function from 0 to 50°C. With these features, the DPH-2 is perfect for many different applications including food and beverage production control, brewing... |
pH Meters
|
|
|
|
EXT2003-PH100 ExStik pH with special surface ph probe
|
|
Built-in Smart chip offers advanced functions and features to a stick style pH meter not found anywhere else
RENEW feature that tells you when it’s time to replace your pH electrode
CAL feature that tells you when it’s time to recalibrate your meter
Flat Surface pH electrode that is completely waterproof and rugged enough to withstand harsh environments
Analog bargraph originates at neutral point (pH 7.00) to conveniently view trends in acidity or alkalinity
Temperature measurements... |
pH Meters
|
|