Name	Description	Category
Kyoritsu 2010	High sensitivity, miniature AC/DC clamp meter. • 0.1mA minimum resolution for AC current and 1mA minimum resolution for DC current. • Output terminal for recorder connection.	AC/DC Digital Clamp Meters
Kyoritsu 2009R	CAT.IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits. • Accurate True-RMS reading of AC current or voltage with distorted waveform. • Can measure AC and DC currents up to 2000A.	AC/DC Digital Clamp Meters
Kyoritsu 2004	Smallest clamp meter capable of AC and DC current measurements. • 20A range has a minimum resolution of 0.01A AC/DC. • AC/DC voltage and resistance measurement functions also available.	AC/DC Digital Clamp Meters
Kyoritsu 2003A	Equipped to measure both AC and DC current with transformer jaws of large diameter. • Can measure AC and DC currents up to 2000A. • Output terminal for connection to recorders.	AC/DC Digital Clamp Meters
Kyoritsu 2300R	True RMS reading is an essential feature for accurate measurement. • “Non Contact” voltage function indicates the presence of AC voltage by warning the user with an audible signal. • Set the DC current range to zero in one touch with the Zero Adjust function.	Fork Current Tester
Kyoritsu 2434	Least affected by external stray magnetic field. • 20mA AC max. in proximity to a 15mm-dia conductor carrying 100A AC • Frequency Selector Switch to eliminate the effect of harmonics.	Leakage Clamp Meters
Kyoritsu 2433R	Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges: 40mA/400mA/400A.	Leakage Clamp Meters
Kyoritsu 2433	Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges : 40mA/400mA/400A.	Leakage Clamp Meters
Kyoritsu 2432	High Sensitive Model • Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges : 4mA/40mA/100A	Leakage Clamp Meters
Kyoritsu 2431	Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges 20mA/200mA/200A. • Rotary switch for easy one finger power-on and range selection.	Leakage Clamp Meters
Kyoritsu 2413R	Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement. • True RMS enables an accurate measurement for distorted waveforms. • Measurement from mA up toAC 1000A • Frequency filter switch to eliminate the effect of the harmonics. • 2 way analogue output terminal:AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 (option) is...	Leakage Clamp Meters
Kyoritsu 2413F	Extra wide transformer jaws are best suited for clamping on all three or four wires (3phases) together for leakage current measurement. • Frequency filter switch to eliminate the effect of harmonics. • Output terminal.	Leakage Clamp Meters
Kyoritsu 2412	Digital clamp meter with tear drop shaped, medium size transformer jaws specially designed for leakage current measurement. • Frequency filter switch to eliminate the effect of harmonics. • Output terminal for connection to recorders and facility to operate from external power supply permit continuous leakage current monitoring.	Leakage Clamp Meters
Kyoritsu 5001	THE LEAKAGE CURRENT IS RECORDED BY 3CH INPUT60,000 DATA IS RECORDED 60,000 data is recorded when 1ch is used and when three all channels are used, 20,000 data is recorded for each channel Continuous measurement time About 40 days Data where it doesn’t disappear even if battery is consumed Data doesn’t disappear by using the nonvolatile memory when the battery is consumed and the battery is exchanged....	Logger
Kyoritsu 5010 (for Current) / 5020 (for Current & Voltage)	3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage • Power Quality analysis(only on KEW 5020)(Power Quality:Reference voltage, Swell, Dip, Short power Interruptions) Large Capacity for storing 60,000 data points 60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded Lowpass Filter will filter out the...	Logger
Kyoritsu 8309	Floating voltage can be measured Floating voltage:phase to phase voltage not grounded KEW 5020-01:KEW 5020 logger with KEW 8309 (1 pce.) For use with following model 5020	Voltage Sensor
Kyoritsu 8129	Flexible for various test fields • Can measure AC current up to 3000A • Flexible and light weight by the air core coil used at the sensor part • Measurable conductor size:max Φ150mm • Designed to meet the international safety standardIEC 61010-1 CAT.III 600V Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315	Flexible Clamp Sensor
Kyoritsu 8130	Can measure AC current up to 1000A • Flexible and light weight by the air core coil used at the sensor part • Designed to meet the international safety standardIEC 61010-1 CAT IV 300V, CAT III 600V Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315	Flexible Clamp Sensor
Kyoritsu 8123	Applicable model 5010/5020 Conductor size Φ55 Rated current AC 1000A Output voltage AC 500mV/1000A (AC 0.5mV/A) Accuracy \|±2.0%rdg±0.3mV (50/60Hz)\|±3.0%rdg±0.5mV (40Hz~1kHz) Withstand voltage AC 5350V for 5 seconds Cable length Approx. 2m Output connector MINI DIN 6pin Operating temperature ranges 0~40ºC, less than 85% RH (without condensation) Output impedance Approx. 1.5Ω Applicable standards IEC 61010-1:2001,IEC...	Load current clamp sensors
Kyoritsu 8122	Applicable model 5010/5020 Conductor size Φ40 Rated current AC 500A Output voltage AC 500mV/500A (AC 1mV/A) Accuracy \|±2.0%rdg±0.3mV (50/60Hz)\|±3.0%rdg±0.5mV (40Hz~1kHz) Withstand voltage AC 5350V for 5 seconds Cable length Approx. 2m Output connector MINI DIN 6pin Operating temperature ranges 0~40ºC, less than 85% RH (without condensation) Output impedance Approx. 1.9Ω Applicable standards IEC 61010-1:2001,IEC...	Load current clamp sensors

Start
Prev
205
206
207
208
209
210
211
212
213
214
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

Sub Categories