Name	Description	Category
MicroTemp-O-Ring	One Set of Replacement O-Rings for MicroTemp.	O-Rings
Level2000-O-Ring	One Set of Replacement O-Rings for Level2000.	O-Rings
Level1000-O-Ring	One Set of Replacement O-Rings for Level1000.	O-Rings
HiTemp150-O-Ring	One Set of Replacement O-Rings for the HiTemp150 data loggers.	O-Rings
HiTemp140-O-Ring	One Set of Replacement O-Rings for the HiTemp140.	O-Rings
WM-300	The WM-300 is a wall-mounting station that is built for use with the Cryo-Temp, TransiTempII, or the TransiTempII-RH. It can be mounted using the adhesive tape along the back or it can be screwed to a wall or any flat surface.	Mounting Kits
WM-100	Wall mount for the Therm•A•lert, Therm•A•lert-RH or Therm•A•lert-P data loggers.	Mounting Kits
Waterbox110C	The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and thread...	Mounting Kits
Waterbox101A	The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use,...	Mounting Kits
SHOCK-MAG-KIT	Magnetic mounting kit for the Shock101, UltraShock, and TSR101.	Mounting Kits
SHOCK-EB-MAG-KIT	Magnetic mounting kit for the Shock101-EB, UltraShock-EB, and TSR101-EB.	Mounting Kits
MagMount-1	The MagMount-1 is a magnetic holder for use with the PR140, HiTemp140 series and 1000 series data loggers. The device can be placed in environments from -80°C to +80°C, making it ideal for use in refrigerators, freezers, and incubators.	Mounting Kits
LUER-FITTING-F	The LUER-FITTING-F is a 1/8” NPT to female luer lock adapter. It can be used with the PR140 data logger with NPT Port. The LUER-FITTING-F can easily be screwed into the 1/8” NPT female port on the data logger. This rugged adapter is made of 316 stainless steel construction and can withstand harsh environments, such as steam sterilization cycles.	Mounting Kits
Level-Filter	Filter for the Level1000 and Level2000 Data Loggers.	Mounting Kits
Key Ring End Cap	This is an optional "Key Ring" end cap for use with the PR140, RHTemp1000 or HiTemp140 series data loggers. Easily attaches to your key ring or lanyard. Warning: Using a key ring end cap on IS rated products voids the IS rating unless installed by manufacturer.	Mounting Kits
Fluke 773 Milliamp Process Clamp Meter	DC voltage measurement to verify 24 V power supplies or voltage I/O signals Source DC voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop mA in/out: simultaneously measure the mA signal with the clamp and source a mA...	AC Leakage Clamp Meter
Fluke 772 Milliamp Process Clamp Meter	Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clamp meter Source 4 to 20 mA signals for testing control system I/O or I/Ps Simulate 4 to 20 mA signals for testing control system I/O Measure 4 to 20 mA signals with in-circuit measurement Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters Source mA output signals in a linear ramp or 25 % step output– Automatically...	AC Leakage Clamp Meter
Fluke 771 Milliamp Process Clamp Meter	Measure mA signals for PLC and control system analog I/O Measure 4 to 20 mA output signals from transmitters without breaking the loop Best in class 0.2 % accuracy Resolution and sensitivity to 0.01 mA Hold function captures and displays changing measurements Dual backlit display with both mA measurement and percent of 4 to 20 mA span Measurement Spotlight illuminates hard to see wires in dark enclosures Detachable clamp with extension cable for measurements in tight locations...	AC Leakage Clamp Meter
Fluke 902 True-rms HVAC Clamp Meter	Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements Small body and jaws fit perfectly in your hand and into tight places Handy 'Display Hold' button keeps measurements on the display Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch) Large, backlit display (on most models) is easy-to-see Auto shut-off maximizes battery life so the meter works when...	AC Leakage Clamp Meter
Fluke 345 Power Quality Clamp Meter	AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter Data logging: Identify intermittent faults by logging any power quality parameter for minutes, or over a month, including harmonics Verify...	AC Leakage Clamp Meter

Start
Prev
117
118
119
120
121
122
123
124
125
126
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

Sub Categories