Name	Description	Category
TEMP-1000-O-RING	One set of replacement o-rings for Temp1000, Temp1000SS (not available for Intrinsically Safe products)	O-Rings
Temp1000P-O-Ring	One set of replacement o-rings for Temp1000P	O-Rings
Waterbox Maintenance Kit	Maintenance kit for the Waterbox101A. This kit comes with 6 hex screws, a replacement O-ring, an allen wrench and a water-tight communication access plug.	O-Rings
Waterbox101A-O-Ring	One set of replacement o-rings for the Waterbox101A.	O-Rings
Waterbox110-O-Ring	One set of replacement o-rings for the Waterbox110.	O-Rings
Key Ring End Cap	This is an optional "Key Ring" end cap for use with the PR140, RHTemp1000 or HiTemp140 series data loggers. Easily attaches to your key ring or lanyard. Warning: Using a key ring end cap on IS rated products voids the IS rating unless installed by manufacturer.	Mounting Kits
Level-Filter	Filter for the Level1000 and Level2000 Data Loggers.	Mounting Kits
LUER-FITTING-F	The LUER-FITTING-F is a 1/8” NPT to female luer lock adapter. It can be used with the PR140 data logger with NPT Port. The LUER-FITTING-F can easily be screwed into the 1/8” NPT female port on the data logger. This rugged adapter is made of 316 stainless steel construction and can withstand harsh environments, such as steam sterilization cycles.	Mounting Kits
MagMount-1	The MagMount-1 is a magnetic holder for use with the PR140, HiTemp140 series and 1000 series data loggers. The device can be placed in environments from -80°C to +80°C, making it ideal for use in refrigerators, freezers, and incubators.	Mounting Kits
SHOCK-EB-MAG-KIT	Magnetic mounting kit for the Shock101-EB, UltraShock-EB, and TSR101-EB.	Mounting Kits
SHOCK-MAG-KIT	Magnetic mounting kit for the Shock101, UltraShock, and TSR101.	Mounting Kits
Waterbox101A	The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use,...	Mounting Kits
Waterbox110C	The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and thread...	Mounting Kits
WM-100	Wall mount for the Therm•A•lert, Therm•A•lert-RH or Therm•A•lert-P data loggers.	Mounting Kits
WM-300	The WM-300 is a wall-mounting station that is built for use with the Cryo-Temp, TransiTempII, or the TransiTempII-RH. It can be mounted using the adhesive tape along the back or it can be screwed to a wall or any flat surface.	Mounting Kits
Fluke 373 True-RMS 600A/600V AC Clamp Meters	600 A ac current measurement with fixed jaw 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement to 6000Ω with continuity detection 1000 µF capacitance measurement State of the art signal processing allows for use in noisy electrical environments while providing stable readings Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch...	AC Leakage Clamp Meter
Fluke 365 True-rms AC Clamp Meter with Detachable 18mm Jaw	200A ac and dc current measurement with detach-able jaw 600V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals 6000Ω resistance measurement with continuity detection Detachable jaw makes accessing wires and viewing the display easier Built in flashlight/torch allows for easy illumination and identification of wires CAT III 600V safety rating Compact design fits in your hand and can be used while wearing personal protective...	AC Leakage Clamp Meter
Fluke 323 400A AC, 600V AC/DC True-RMS Clamp Meter	400 A AC current measurement 600 V AC & DC voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kΩ with continuity detection Features: Slim, ergonomic design CAT IV 300V/CAT III 600 V safety rating Hold button Two-year warranty Soft carrying case	AC Leakage Clamp Meter
Fluke 324 40/400A AC, 600V AC/DC True-RMS Clamp Meter with Temperature, & Capacitance Measurements	400 A AC current measurement 600 V AC & DC voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kΩ with continuity detection Temperature and capacitance measurement Features: Slim, ergonomic design Backlight display CAT IV 300V/CAT III 600 V safety rating Hold button Two-year warranty Soft carrying case	AC Leakage Clamp Meter
Fluke 325 40/400A AC/DC, 600V AC/DC True-RMS Clamp Meter with Frequency, Temperature, & Capacitance Measurements	400 A ac and dc current measurement 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kΩ with continuity detection Temperature and capacitance measurement Frequency measurement Min/Max functionality Features: Slim, ergonomic design Backlight display CAT IV 300V/CAT III 600 V safety rating Hold button Two-year warranty Soft carrying case	AC Leakage Clamp Meter

Start
Prev
117
118
119
120
121
122
123
124
125
126
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

Sub Categories