FOTRIC 226B Thermal Imaging System For Fever Screening

Category: FOTRIC - USA

Fotric 226B Thermal Imaging System for Fever Screening

The FOTRIC 226B Thermal Imaging Fever Screening system offers an automated and precise setup, built for instantaneous fever screening with software automation and without disrupting the flow of foot traffic. With a temperature range of 20˚C to 60˚C (68˚F - 140˚F), the FOTRIC 226B has a high level of precision with a 384 x 288 thermal resolution (110K pixels) and accuracy calibrated at ±0.2ºC.

The non-contact measurement type of the 226B ensures the continuing safety of the detection personnel by keeping them a safe distance from potential infection. Both audible and visual indication is given through a voice alarm and an on-screen red-box appearing if an abnormal body temperature is caught.

Using inbuilt AI, the FOTRIC 226B is a Polysilicon-FPA detector producing up to 110K temperature measuring points per photo. Issued with a calibration certificate from the Shanghai Institute of Quality Supervision and Inspection Technology, the device is so thorough these measuring points even cover a full head of hair. Compact and IP40 rated, this full body scanner is cost effective, safe and extremely easy to maintain with a quick setup process and minimal training required.

Fotric 226B In Use

Perfect for many different environments

The FOTRIC 226B is designed with versatility at the forefront, taking only ten minutes to deploy including installation, commissioning and powering up. The device supports perpetual 24 hour monitoring whilst maintaining a temperature stability of ±0.5˚C. Requiring an AC power source, suitable for both indoor and outdoor environments, the detection distance ranges from 0.8 to 3.2m. Connect the instrument to a laptop or PC through a standard USB connection (external monitor or laptop is not supplied with the 226B).

The FOTRIC 226B  Fever Screening System is Ideal for:

  • Transportation Hubs
  • Hospitals
  • Schools
  • Government Agencies
  • Corporations and Factories

In a typical two-channel screening situation the 226B can scan up to two people every 3 seconds, averaging roughly 40 bodies a minute and 2,400 an hour. If the typical walking speed through the channels is increased slightly, the scanner is fully capable of analysing an incredible 3,600 people per hour. Whereas other screening systems must scan one case at a time, the Fotric 226B's ability to scan two faces simultaneously without pause or image freezing, greatly reduces both labor intensity and time spent passing through the screening channels.

WLIR Software featuring inbuilt algorithms 

WLIR PC Software comes as standard with the FOTRIC 226B Thermal Imaging Fever Screening system. The WLIR Software tool includes an incorporated A.I. face detection module, automatically locking a subject's face for temperature measurement. The software intelligently disregards other inconsequential high-temperature sources such as a hot beverage in the scanning field. Similarly, it adjusts the body temperature alarm threshold, in real time, by adapting to ambient temperature changes that could impact skin temperature of bypassers.

Due to these calibrated algorithms the FOTRIC 226B does not require a Blackbody reference source when operated. The camera self compensates to ensure ongoing temperature stability.  

In addition to the FOTRIC 226B's aforementioned features, for increased epidemic prevention and control, the WLIR software will automatically count the number of screened personnel alongside the number of suspected abnormal body temperature alarms during the screening process. The WLIR also features a body temperature algorithm which continuously collects face temperatures in different scenarios to aid in self-learning.

Should an abnormal temperature be detected by the FOTRIC 226B, the WLIR emits a buzzer while simultaneously providing quick on-site identification by displaying the face recognition frame of the body in question. If the alarm is trigged the image of the person will be automatically captured and saved for later statistics and analysis.

Fotric 226B In Use 2

Key Features

  • Efficient & rapid body scanner
  • Temperature range of 20˚C to 60 ˚C (68˚F - 140˚F)
  • Little impact on an area's population traffic efficiency
  • Audible voice alarm / visual red box indicator
  • Self compensates for changes to ambient temperatures and distances
  • Scan two faces simultaneously
  • Non-contact measurement - ensuring safety of detection personnel
  • Precise due to increased pixel count of 384 x 288
  • Built-in AI intelligence
  • Polysilicon-FPA detector
  • A single photo produces up to 110k temperature measuring points, including in hair
  • Cost effective, safe and easy to maintain
  • Quick to deploy including installation, commissioning and powering up.
  • Supports continuous 24 hour monitoring with a temperature stability of ±0.5˚C
  • Indoor or outdoor - best performance indoor, detect distance 0.8m to 3.2m
  • WLIR software included with intelligent AI
  • Automatically locks face temperature, disregards miscellaneous external temps
  • Automatically count the number of screened personnel / abnormal cases recorded
  • Captures the image of suspect temperature and displays it on screen
  • IR Resolution: 384 x 288 pixels
  • Thermal Sensitivity (NETD):<0.05˚C @ 30˚C
  • Field of View: 28˚H x 21˚V
  • Detector Type:
    • Poysillicon-FPA
    • Uncooled Microbolometer
    • 17µm
    • Spectral Range 8-14µm
  • Frame Rate: 50Hz
  • Temperature Range: 20˚C-60˚C (68˚F-140˚F)
  • Accuracy: ±0.2˚C
  • Temperature Stability: ±0.5˚C
  • AI Face Detection: Dual Light Detection (visible light and infrared thermal)
  • AI Body Temperature Algorithm: Calibrate alarm thresholds in real time based on ambient temperature
  • Statistic Function: Automatic statistics of screening number
  • Shooting Mode:
    • Automatic abnormal temperature snap shot
    • Manual shooting
  • Alarm Function: Both colour alarm and sound alarm
  • Color Pallet:
    • Black-White
    • Iron
    • Rainbow
  • Image Format: Standard JPEG with temperature data
  • Interface Connection: USB
  • Software: 0˚C-40˚C (32˚F-104˚F)
  • Operating Temperature: -20˚C-40˚C (32˚F-104˚F)
  • Storage Temperature: -20˚C-50˚C (-4˚F-122˚F)
  • Enclosure Rating: IP40
  • Charging System: DC 12V Charger
  • Weight: ±560g
  • Dimensions (LxHxW): 97mm x 145mm x 93.5mm
  • Tripod Mounting: UNC 1/4"-20
  • Warranty: 1 Year
  • Standard Configuration:
    • Fotric 226B infrared imager
    • Standard lens
    • DC adaptor
    • 3m USB
    • Calibration Certificate
    • Getting Started Manual (with warranty card)

 

  • 1 x FOTRIC 226B Infrared Imager
  • 1 x Standard Lens
  • 1 x DC Adaptor
  • 1 x 3m USB
  • 1 x Calibration Certificate
  • 1 x Manual (with warranty card)
Ask about this product