You have 0 items in your cart.
Fluke
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Fluke TL930 Patch Cords (60 cm) | 1 pair (red, black) multi-stacking 4 mm banana plug patch cords Nickel-plated banana plugs 61 cm long PVC insulated leads 30 V rms or 60 V DC, 15 A One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TL910 Electronic Test Probes | Very small 1 mm tips to access hard to reach test points Probe tip length up to 100 mm, test lead length: 1 m CAT II 1000 V, 3 A rating One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TL2X4W-TWZ 2X4-Wire Ohms Tweezers Test Leads | Uses traditional 4-wire method Tweezer shape Eliminates the resistance of the test leads Wire tweezers able to probe onto even the smallest of surface mount components | Test Leads, Probes, Clips |
|
|
|
Fluke TL2x4W-PT 7 2X4-Wire Ohms Test Lead | Perform 4-wire measurements with only two test leads Two conductors per lead (one source and one measure) Excellent resolution and accuracy | Test Leads, Probes, Clips |
|
|
|
Fluke TL2x4W-PT II 2X4-Wire Ohms Test Lead | Perform 4-wire measurements with only two test leads Two conductors per lead (one source and one measure) Excellent resolution and accuracy | Test Leads, Probes, Clips |
|
|
|
Fluke TL224 SureGrip™ Insulated Test Lead Set | DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Right angle connector on one end and straight connector on the other Reinforced strain relief 1.5 meter silicone-insulated wire resists heat & cold CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TL222 SureGrip™ Silicone Insulated Test Leads | DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Right angle connector on both ends Reinforced strain relief 1.5 meter silicone-insulated wire resists heat & cold CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TL1550EXT Extended Test Lead Set | Test Leads connected to Low-Leakage Probes(red, black, green) 3 Alligator Clips (red, black, green) Maximum Jaw Opening: 26 mm (1in) Replacement Test Lead Set for the Fluke 1550B/1550C/1555 MegOhmMeter Cat II 1000 V, Cat III 600 V, 5kV DC Max (Probes) Cat II 1000 V, Cat III 600 V, 20 amps (Alligator Clips) Test Leads extend to 25ft! | Test Leads, Probes, Clips |
|
|
|
Fluke TL1550B Test Leads with Alligator Clips (Red, Black, Green) | 3 Test Leads connected to Low-Leakage Probes (red, black, green) 3 Alligator Clips (red, black, green) Maximum Jaw Opening: 26 mm (1 in.) Replacement Test Lead Set for the Fluke 1550B MegOhmMeter Length (Lead Only): 2.6 m (8.6 feet) Cat II 1000 V, Cat III 600 V, 5kV DC Max (Probes) Cat II 1000 V, Cat III 600 V, 20 amps (Alligator Clips) | Test Leads, Probes, Clips |
|
|
|
Fluke TL175E TwistGuard Test Leads | Patented TwistGuard extendable tip shroud that meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements New WearGuard lead wire wear indicator. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement Double insulated silicone leads. TL175 withstands high temperatures and remains flexible in cold... | Test Leads, Probes, Clips |
|
|
|
Fluke TL175 TwistGuard Test Leads | Patented TwistGuard extendable tip shroud that meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements New WearGuard lead wire wear indicator. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement Double insulated silicone leads. TL175 withstands high temperatures and remains flexible in cold... | Test Leads, Probes, Clips |
|
|
|
Fluke T5-RLS Replacement Test Lead Set for T5-600 and T5-1000 | Replacement Test Lead Set For T5-600 and T5-1000 Electrical Testers | Test Leads, Probes, Clips |
|
|
|
Fluke STL120-III Shielded Test Leads | Length: 1.2m (48”) Bandwidth: 12,5 MHz Maximum Signal Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031 Maximum Current: 1A | Test Leads, Probes, Clips |
|
|
|
Fluke 85RFII 500V High Frequency Probe | Voltage Range: 0.25 to 30V rms Maximum Input Voltage: 30V rms, 200V dc AC to DC Ratio: 1:1 Ratio Accuracy (At 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB Below 0.5V: +/- 1.0 dB Add +/- 0.2 dB in RF fields of 1 to 3 V/m Frequency Response (Relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB 100 MHz to 200 MHz +/- 2.0 dB 200 MHz to 500 MHz +/- 3.0 dB | Test Leads, Probes, Clips |
|
|
|
Fluke Networks Pro3000 Analog Tone and Probe | Tone and trace wire on non-active networks SmartTone™ technology provides five distinct tones for exact pair identification Sends loud tone up to 10 miles (16 kilometers) on most cables Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures Angled bed-of-nails clips allow easy access to individual pairs RJ11 connector is ideal for use on telephone jacks Attach nylon pouch (included in kit) to your belt for easy transport | Copper Cable Test Solutions |
|
|
|
Fluke TS90 Cable Fault Finder | Three tools in one: Fault locator Cable and wire manager Patented SmartTone analog tone generator Works on any two or more conductor cable up to 2,500 ft Instantly measures distance to open or any fault from one end of any cable pair Patented SmartTone tone generator positively identifies pair measures cable distance on spool Measures constantly while "on" Displays distance reading rather than waveform Moisture proof | Copper Cable Test Solutions |
|
|
|
Fluke Networks TS100-PRO-BT-TDR Cable Fault Finder TDR Kit with Bridge Tap Detect | Bridge tap detection for xDSL pre-qualification Reports distance to multiple bridge taps up to 3,200 ft. Sees past bridge taps to the end of the cable Tests opens and shorts up to 8,000 ft. Patented SmartTone tone generator with five different tones for exact pair identification Built-in TDR AC/DC voltage detection One-button testing Built-in toner | Copper Cable Test Solutions |
|
|
|
Fluke TS100 Cable Fault Finder | Works on any two or more conductor cable up to 3,000 feet (915 meters) Instantly measures distance to open or any fault from one end of any cable pair Patented SmartTone™ tone generator positively identifies pair Measures cable distance on spool Measures constantly while "On" Displays distance reading rather than waveform Large bright LED screen One button operation High voltage detection Moisture proof Additional line cord options available for coaxial cable... | Copper Cable Test Solutions |
|
|
|
Fluke Networks IntelliTone 100 (MT-8200-50A) & IntelliTone 200 (MT-8200-60A) Toner and Probe Kits | Ends cable location confusion, decisively rejects noise and false signals Locates cable quickly from a distance, even on an active network Isolates cable and wiring precisely from a bundle, despite cable bleed Validates twisted-pair installation with visual end-to-end Cablemap (opens, shorts, and reversed pairs) Breakthrough patent pending IntelliTone technology Every day, cabling installers and network technicians deal with the shortcomings of cable location tools that are based... | Copper Cable Test Solutions |
|
|
|
Fluke DSX-5000QOi 1 GHz DSX Series Cable Analyzer with OLTS Quad, OTDR Quad and Fiber Inspection | Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time. Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels. LinkWare management software... | Copper Cable Test Solutions |
|