You have 0 items in your cart.
Test Leads, Probes, Clips
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Fluke 884X-RTD T100 Ohm RTD Temperature Probe | Manufactured using a coil suspension element design for increased shock and vibration resistance Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability | Test Leads, Probes, Clips |
|
|
|
Fluke DP120 Differential Probe | Designed to make measurements on signals with floating reference Has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF. | Test Leads, Probes, Clips |
|
|
|
Fluke FTP-1 Fused Test Probe Set | Fused test probe set Additional protection when measuring voltage or current Fits any Fluke modular test leads | Test Leads, Probes, Clips |
|
|
|
Fluke FTPL-1 Fused Test probe Set with Test Leads | Fused Test probe Set with Test Leads Additional protection when measuring voltage or current Includes TL224 test leads | Test Leads, Probes, Clips |
|
|
|
Fluke i2000-Flex AC Flexible Current Clamp | Three ranges: 20A, 200 A & 2000 A, 1 mV, 10 mV & 100 mV/A output Ideal for current measurement on thick and hard to reach conductors without breaking the circuit Maximum conductor diameter 178 mm CAT III 600V safety rating | Test Leads, Probes, Clips |
|
|
|
Fluke ITP120 Optically Isolated External Trigger Probe | Designed for use with Fluke ScopeMeter 120-series The probe connects to the optical port of the ScopeMeter 120, and features isolated external triggering, for measurements that require external triggering or triggering on floating reference signals Probe length is 1.2m (48 inch) The probe includes a hookclip with ground lead, and a 9-Volt Alkaline battery. | Test Leads, Probes, Clips |
|
|
|
Fluke TL910 Electronic Test Probes | Very small 1 mm tips to access hard to reach test points Probe tip length up to 100 mm, test lead length: 1 m CAT II 1000 V, 3 A rating One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP1 Slim Reach Test Probes | One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals Hard stainless steel probe tips Flat blade design to hold securely in blade type electrical wall sockets CAT IV 600 V, CAT II 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP165X Remote Control Probe | Slim probe with test button keeps your eyes on the panel while probing hard to reach points. | Test Leads, Probes, Clips |
|
|
|
Fluke TP175 TwistGuard Test Probes with 2mm Diameter Probe Tips | Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP175 TwistGuard Test Probes with 2mm Diameter Probe Tips | Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP2 Slim Reach Test Probes | One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals Hard stainless steel probe tips 2 mm diameter tip for electronics work. Also compatible with AC72 CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP220 SureGrip™ Industrial Test Probes | One pair (red, black) of Industrial test probes Sharp, 12 mm stainless steel tip provides reliable contact Flexible finger barrier improves grip Recommended for use with TL222 and TL224 test leads CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP4 Slim Reach Test Probes | One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals Hard stainless steel probe tips 4 mm diameter probe tip designed to fit securely into IEC electrical wall outlets CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP40 Automotive Back Probe Pins (five) | Banana jack accepts all DMM and banana jack leads Tested to 60 V DC | Test Leads, Probes, Clips |
|
|
|
Fluke TP74 Lantern Tip Test Probes | One pair (red, black) Tips include banana-style spring contacts with nickel-plated brass ends CAT III 1000 V, 10 A rating One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP80 Electronic Test Probes | One pair (red, black) IC insulated cap prevents shortening of IC legs for probing high density components or boards CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke AC120 Alligator Clips | Maximum Voltage: 600Vrms CAT III per IEC 1010-2-031 Maximum Current: 10A Material: Nickel-plated steel jaw Jaw Opening: 5/16’’ (8mm) | Test Leads, Probes, Clips |
|
|
|
Fluke AC220 SureGrip™ Alligator Clips | One pair (red, black) of small, insulated, nickel plated jaws Blunt tip grabs round screw heads up to 9.5 mm Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke AC280 Pincer Clips | One pair (red, black) of nickel plated clips Profile narrows to 5.6 mm at tip, hook opening 6.4mm at front, 2 mm at base Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed | Test Leads, Probes, Clips |
|