You have 0 items in your cart.
By Brands
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK GRF-3300 Series | Features * Designed for wireless frequency range applications * Includes a 880MHz Digital PLL and 2.4GHz microstrip line filter circuits* Include these applications of RF Transmitter and Receiver both * Training for the Voice Communication System * Demonstrates the applications and measurements for using spectrum analyzers in communication instruments * Specific RF circuit characteristics & PCB Layout on each module * Training system covering 22 modules, and over... | RF Training Systems |
|
|
|
GW INSTEK AFG-3000 Series | Features * Wide frequency range from 1uHz to 80/50MHz* High 200MSa/s sampling rate * 16-bit Amplitude Resolution* Output from any section of 1M-point-long waveforms* 4.3" high resolution LCD display/on-screen help/Impedance switch* Four ways to generate arbitrary waveforms: Front Panel Operation CSV file uploading, Direct Waveform Reconstruction (DWR), ArbitraryWaveform Editing PC Software * USB, RS-232, GPIB interface support | Arbitrary Function Generators |
|
|
|
GW INSTEK AFG-2225 | Features: * Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave) * 1 μHz Resolution in Full Range * Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels* True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1* Couple, Tracking, Phase Operations of Dual Channel are Supported* 1% ~ 99% Adjustable Duty Cycle for Square Waveform * High Resolution and Colored TFT LCD with Friendly User Interface * Multiple Editing methods to... | Arbitrary Function Generators |
|
|
| GW INSTEK AFG-100/200 Series | Features - Frequency range: 1uHz~25MHz- 1uHz frequency resolution - Built-in 120 MSa/s, 10 bit resolution and arbitrary waveform editing function with 4k point memory- Dual channel models support coupling, tracking, and phase functions- Square waveform can adjust the duty cycle from 1% to 99%.- Support various arbitrary waveform editing methods.- Built-in AM/FM/PM/FSK/SUM(AFG-225/225P) modulation, sweep and burst functions- USB interface signal control- AFG-125P/225P provide three DC... | Arbitrary Function Generators |
|
||
|
GW INSTEK AFG-2000/2100 Series | Features * 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution* Sine, Square, Triangular, Noise and Arbitrary Waveform* 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform * 1% ~ 99% adjustable duty cycle for Square Waveform* Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection* Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously* AM/FM/FSK Modulation, Sweep, and Frequency Counter... | Arbitrary Function Generators |
|
|
|
GW INSTEK SFG-2100/2000 Series | Features *DDS Technique and FPGA Chip Design *Frequency Range : 0.1Hz~4/10MHz *High Frequency Accuracy : ± 20ppm *Frequency Resolution : 100mHz *Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz *Front Panel Setting Save/Recall with 10 Groups of Setting Memories *Built-In 9 Digits,150MHz/High Resolution Counter(SFG-2110 Only)*INT/EXT AM/FM Modulation (SFG-2110 Only)*LIN/LOG Sweep Mode(SFG-2110 Only) | DDS Function Generators |
|
|
|
GW INSTEK SFG-1000 Series | Features *DDS Technique and FPGA Chip Design *Frequency Range:0.1Hz~3MHz *High Frequency Accuracy : ± 20ppm *High Frequency Stability : ± 20ppm *Max. Frequency Resolution : 100mHz *Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz *Voltage Display (Only SFG-1013) | DDS Function Generators |
|
|
|
GW INSTEK GFG-3015 | Features *Frequency Range 0.01Hz~15MHz *Maximum Frequency Resolution 10mHz *Dual Displays Indicate Frequency and Amplitude *Built-in 6 Digits Counter up to 150MHz/High Resolution *Output Waveforms Sine,Square,Triangle,Ramp,Pulse,Sweep,Gate or Burst *INT/EXT AM/FM Modulation *GCV Output for Synchronization *Output Overload Protection | Analog Function Generators |
|
|
|
GW INSTEK GFG-8200A Series | Features *Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)*Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)*Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output*External Voltage Controlled Frequency (VCF) Function *Two-Steps (-20dBx2) and Variable Attenuator *Built-In 6 Digits Counter with INT/EXT Function up to 150MHz(Except GFG-8215A)*INT/EXT AM/FM Modulation (GFG-8219A/8255A)*GCV Output for Synchronization (GFG-8219A/8255A) | Analog Function Generators |
|
|
| GW INSTEK GFG-8020H | Features *Frequency Range : 0.2Hz ~ 2MHz *Coarse and Fine Tuning *Waveform : Sine, Triangle, Square, TTL Pulse *CMOS Output *Built-In 4 Digits Counter (INT Only) *Large 0.5" LED Display *Variable DC Offset Control *Output Overload Protection *VCF Input Function | Analog Function Generators |
|
||
|
GW INSTEK GFG-8015G | Features *Frequency Range : 0.2Hz ~ 2MHz *Waveform : Sine, Triangle, Square, TTL Pulse *Variable DC Offset Control *Output Overload Protection *VCF Input Function *1000 : 1 Tuning Range | Analog Function Generators |
|
|
|
GW INSTEK GSG-120 | Features *Freq Range 100kHz ~ 110MHz *Output Level -19 ~+99 dBu *All Operations are Controlled by Microprocessor *Memory Storage: 10 points in one block(up to 100 continuous points) *and 4 output levels *Memory Data Copy *Back Space key *Remote Control Function(Need the GRC-1201 option) *FM Stereo Modulation (GSG-122 only) | Other Signal Sources |
|
|
|
GW INSTEK GAG-810/809 | Features *Frequency from 10Hz ~ 1MHz *0.02% Low Sine Wave Distortion (GAG-810 Only)*6 Steps Output Attenuator *EXT SYNC Function | Other Signal Sources |
|
|
|
GAS DNA GMS1000 Single -Channel digital controller for gas detector | GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... | Digital Controller |
|
|
|
GAS DNA GMS1500 4-Channel digital controller for gas detector | GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can... | Digital Controller |
|
|
|
GAS DNA GMS 2000 Multi-channel digital controller for gas detector | GMS-2000 is multi-channel digital controller to monitor gas leakages from more than one gas detectors simultaneously. GMS-2000 is composed of one alarming unit & more than one receiving units. While each receiving units in GMS-2000 receive density signals from external gas detectors, when the density becomes higher than alarm value, receiving units automatically give signal to alarming unit to sound alarm. GMS-2000 transmits the relay output and standard current output signal 4-20㎃ to... | Digital Controller |
|
|
|
Center CENTER 25 - Flexible Current Probe | Plug into multimeters, oscilloscopes, or power analyzers to measure AC current, up to 3000 A ac. Center 25 is also ideal for commercial or residential users who have standard clamp meters, but need to reach hard-to-clamp-on places, or occasionally measure AC current higher than 400 or 600 A. Center 25 simply eases your work. | Flexible_Clamp |
|
|
|
Center CENTER 26 - Flexible Current Meter | The new flexible current probes make your measurement possible where the space is too tight or difficult for clamp meters. Center 26 is composed of a 8.5mm, double-insulated flexible sensor and a True-RMS electronic module with back-lit LCD for accurate and clear reading in all environments. Measurement range from 1 to 3000 A ac, available in 10" and 18" length probe. | Flexible_Clamp |
|
|
|
Center CENTER 20 - Basic Clamp Meter (AC) | We optimized the cost to sell for less but never wanted to sacrifice any performance. The new CENTER 20 is built on quality. It is robust and reliable. The basic clamp meter functions with AC current measurement are more than proficient for most of general electricians or equipment installers in the field. Also, it’s rated 600V CAT III, it is safe to use. | Clamp_Meters |
|
|
|
Center CENTER 21 - Smart Clamp Meter (AC) | With smart detection function, you can care less whether you are measuring AC or DC voltage as it just knows. Moreover, the integrated capacitance, resistance, diode test, and continuity function brings even more conveniences. NCV function also alarms you intuitionally immediate upon detection of voltage. To make your job easier, backlit LCD shows you the bright and clear reading regardless what kind of working condition you are in. CENTER 21 is also rated 600V CAT III. | Clamp_Meters |
|