You have 0 items in your cart.
By Brands
ELECTRICAL SAFETY & ARC FLASH PPE
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
SALISBURY RESCUE HOOK 8' LENGTH | Salisbury Rescue Hook - 24403 Salisbury insulated rescue hook is an invaluable tool for any workplace used to withdraw an injured worker out of a hazardous area. Confined spaces, in vaults, or just near electrical cabinets and switch gear are some of the places where this tool is a must. Featuring a foam filled, fiberglass reinforced handle for superior electrical insulation and a coated heat treated body hook with an 18” opening. Rescue Hook 8’ (2.4 m) length. Warning : Discharge... | HOT STICK AND TOOLS |
|
|
|
SALISBURY 2 SECT UNIV SWITCH STICK 20' | Salisbury 2 Sect Univ Switch Stick - 4042One, two, and three section hot sticks have a standard splined universal head. 1.25” dia. switch sticks are supplied with a #9971 Prong. A Heavy Duty Disconnect Prong #9969 is supplied on all others.OAL Length: 20, Top (in x ft):1.25 x 10, Bottom (in x ft): 1.5 x 10. | HOT STICK AND TOOLS |
|
|
|
SALISBURY UNIVERSAL SWITCH STICK, 1.25” X 4’ W/ #9971 CUT OUT PRONG | Salisbury Universal Switch Stick - 4213One, two, and three section hot sticks have a standard splined universal head. 1.25” dia. switch sticks are supplied with a #9971 Prong. A Heavy Duty Disconnect Prong #9969 is supplied on all others.Dimensions (in x ft): 1.25 x 4. | HOT STICK AND TOOLS |
|
|
|
SALISBURY MATTING, SWITCHBOARD ,CL2, 48" WIDE, 1 YARDS PER ROLL | Salisbury Matting Switchboard -M48-2/1YD Switchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Made from high quality Type II material, Class 2 matting is 1/4” (6.4mm) thick and is tested to 20kV.Class 2 matting comply with ASTM D178. The corrugated surface acts as a safety tread... | INSULATORS |
|
|
|
SALISBURY LOW-VOLT BLANKETS W/ VELCRO, 12” X 36”, CLASS 0 TYPE LL, YELLOW | Salisbury Low-Volt Blankets - 1236YLVLow Voltage Insulating Blankets are made of Type II SALCOR® rubber. Features and BenefitsCovering energized equipment is easier than ever using Salisbury’s Zip-On blankets. Our Zip-On Style (Zip) features one-inch wide strips of hook and pile double stitched to the blanket with nylon thread, so installation and removal is safe and fast. Zip-On blankets can be manufactured to fit special requirements. | INSULATORS |
|
|
|
SALISBURY LOW VOLTAGE INSULATING BLANKETS W/VELCRO, 15" X 18", CLASS 0, TYPE II, YELLOW | Salisbury Low-Voltage Blankets - 1818YLVLow Voltage Insulating Blankets are made of Type II SALCOR® rubber. Features and BenefitsCovering energized equipment is easier than ever using Salisbury’s Zip-On blankets. Our Zip-On Style (Zip) features one-inch wide strips of hook and pile double stitched to the blanket with nylon thread, so installation and removal is safe and fast. Zip-On blankets can be manufactured to fit special requirements. | INSULATORS |
|
|
|
SALISBURY LOW-VOLT BLANKETS W/ VELCRO, 36” SQ, CLASS 0 TYPE LL, YELLOW | Salisbury Low-Voltage Blankets - 3636YLVLow Voltage Insulating Blankets are made of Type II SALCOR® rubber. Covering energized equipment is easier than ever using Salisbury’s Zip-On blankets. Our Zip-On Style (Zip) features one-inch wide strips of hook and pile double stitched to the blanket with nylon thread, so installation and removal is safe and fast. Zip-On blankets can be manufactured to fit special requirements.ASTM Class 0, Type II, 36" x 36", Yellow. | INSULATORS |
|
|
|
SALISBURY MATTING, SWITCHBOARD ,CL2, 24" WIDE, 2 YARDS PER ROLL | Salisbury Matting Switchboard -M24-2-2YDSSwitchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Made from high quality Type II material, Class 2 matting is 1/4” (6.4mm) thick and is tested to 20kV.Class 2 matting comply with ASTM D178. The corrugated surface acts as a safety tread while... | INSULATORS |
|
|
|
SALISBURY MATTING, SWITCHBOARD ,CL2, 24" WIDE, 3 YARDS PER ROLL | Salisbury Matting - M24-2Switchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Can be placed permanently in front of switchgear, motor control centers and other high voltage apparatus to provide an additional level of protection for electrical workers.Made from high quality rubber, 1/4”... | INSULATORS |
|
|
|
SALISBURY MATTING, SWITCHBOARD ,CL2, 24" WIDE, 6 YARDS PER ROLL | Salisbury Matting - M24-2Switchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Can be placed permanently in front of switchgear, motor control centers and other high voltage apparatus to provide an additional level of protection for electrical workers.Made from high quality rubber, 1/4”... | INSULATORS |
|
|
|
SALISBURY MATTING, SWITCHBOARD, CL 2, 30” WIDE , 1 YARD PER ROLL | Salisbury Matting - M30-2Switchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Can be placed permanently in front of switchgear, motor control centers and other high voltage apparatus to provide an additional level of protection for electrical workers.Made from high quality rubber, 1/4”... | INSULATORS |
|
|
|
SALISBURY SWITCHBOARD MATTING, CL2, 36" WIDE, 10 YARDS PER ROLL | Salisbury Matting Switchboard -M36-2/10YDSSwitchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Made from high quality Type II material, Class 2 matting is 1/4” (6.4mm) thick and is tested to 20kV.Class 2 matting comply with ASTM D178. The corrugated surface acts as a safety tread while... | INSULATORS |
|
|
|
SALISBURY MATTING, BUFFALO RUBBER,CL2, 36" WIDE, 2 YARDS PER ROLL | Salisbury Matting - M36-2Switchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Can be placed permanently in front of switchgear, motor control centers and other high voltage apparatus to provide an additional level of protection for electrical workers.Made from high quality rubber, 1/4”... | INSULATORS |
|
|
|
SALISBURY SWITCHBOARD MATTING, CL2, 36" WIDE, 3 YARDS PER ROLL | Salisbury Switchboard Matting - M36Switchboard Matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors.Can be placed permanently in front of switchgear, motor control centers and other high voltage apparatus to provide an additional level of protection for electrical workers.Made from high quality rubber,... | INSULATORS |
|
|
|
SALISBURY MAGNETIC BLANKET BUTTON | Salisbury Magnetic Blanket Buttons - MB6MB6 Magnetic Blanket Buttons are designed for use in eyelets of insulating blankets when covering energized portions in hard-to-cover areas like pad mounts, cubicles, switchboards and substations. Four permanent floating magnets are mounted between nickel-plated steel plates. May be applied manually, wearing rubber gloves, or with a shot-gun stick. | INSULATORS |
|
|
|
SALISBURY 7,500V CLEAR-CLASS 1, TYPE II ROLL BLANKET MATERIAL 3' X 30' | Salisbury Roll Blankets - RLBPVC1Salisbury has gone to great lengths to protect workers from low voltage electrical hazards, by now offering insulating roll blankets. Salisbury’s insulating Roll Blankets are made from a high strength fabric reinforced Type II rubber in unique colors making it easy to identify and highly visible in the work area. All classes of Roll Blankets are easy to cut, and flexible to -40°F/C. Highly puncture and tear resistant, each class of blanket is also flame... | INSULATORS |
|
|
|
SALISBURY GROUND SET, C/O #1895 CLAMPS A& 6' - 2/0 CU CABLE | Salisbury Ground Set - 24309Salisbury offers a variety of single grounding assemblies. These single ground assemblies offer versatility to the user when performing temporary grounding.2 ea. #1895 Serrated Aluminum “C” Clamp 1.5” 1 pr. #2024 Ferrules ,6 ft.#2138 2/0 Cu. Cable yellow.ASTM 2. | GROUNDING EQUIPMENT |
|
|
|
SALISBURY SPIKING TOOL&GROUNDING ASSEMBLY | Salisbury Spiking Tool & Grounding Assembly - 24320The Hydraulic Cable Spike is designed to verify underground cable is de-energized before cutting, repairing, splicing or replacing.Cable Length: 6'Spiking Tool and Grounding Assembly: Cable Spiking Tool and Insert, 4388 C Clamp, 2139 4/0 Cu Calbe, 2025 4/0 Cu Ferrules (Pair), 616 BagThe cable spike, a solid brass body with a stainless steel piercing tip, is fitted to hydraulic compression tools so that the cable can be accurately spiked from a... | GROUNDING EQUIPMENT |
|
|
|
SALISBURY VOLTAGE DETECTOR, 1-4544 TESTER 240V TO 230KV, 1-4315 CASE, 1-2500 SHOTGUN ADAPTER | Salisbury Voltage Detector - 4556Salisbury’s Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly.Self-Testing Voltage Detectors are used to verify live or de-energized conductors. Tester may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Tester indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is... | GROUNDING EQUIPMENT |
|
|
|
SALISBURY SELF TESTING VOLTAGE DETECTOR KIT 1-4744 TESTER 240V TO 69KV, 1-4315 CASE, 1-2500 SHOTGUN ADAPTER | Salisbury Self Testing Voltage Detector Kit - 4769Salisbury’s Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly.Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Testers indicate the presence of voltage with an extra bright LED light and a... | GROUNDING EQUIPMENT |
|