You have 0 items in your cart.
By Brands
ANCHORAGE CONNECTOR
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
CLIMBTECH BEAM CLAMP,VERTICAL, 4"-14", 5K | CLIMBTECH Vertical / Fixed Beam Clamp The VBC014N is a fixed I-beam anchor that is easy to operate and designed to clamp onto a vertical or horizontal I-beam to create a fixed anchor point. Components: Zinc Plated Steel Swivel D-Ring Zinc Plated Steel Support Bar Zinc Plated Steel Flange Hooks Stainless Steel D-Ring Mount | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT AT061 ALU ANCHOR BEAM + BAG | Protekt ALU Anchor Beam + Bag - AT061 Light aluminium alloy anchor beam AT 061 is a component of fall protection equipment and can be used as a portable anchor device. The beam can be used in building openings (windows and doors), 300 to 1270mm wide. It is fitted with two fixing plates. | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT SCREW CLIP (STAINLESS STEEL) | PROTEKT AC930 Screw Clip When the screw is turned, it acts as a worm drive pulling the threads of the band, causing the band to tighten around the hose (or when screwed the opposite direction, to loosen). Screw clamps are normally used for hoses 1/2 inch diameter and up, with other clamps used for smaller hoses. | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT 3 POINT END STRUCTURAL ANCHOR POINT | PROTEKT 3 POINT END STRUCTURAL ANCHOR POINT | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT ALU ANCHOR CLAMP, DIMENSIONS: 440 X 100 X 45MM FOR ONE WORKER | Protekt ALU Anchor Clamp - AT250 The AT 250 catch device is a portable anchor point, adapted to work with a rail with an I-section cross-section. The rail must be permanently attached to the fixed structure. | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT SLIDER OPENABLE (DUO SYSTEM ONLY) | PROTEKT SLIDER OPENABLE (DUO SYSTEM ONLY) Stainless steel, 0.43kg. | ANCHORAGE CONNECTOR |
|
|
|
WORKSAFE® ROOF LANDYARD FOR HORIZONTAL USE CR200 AND CR300 | WORKSafe® Roof Lanyard for Horizontal - AZ800 The AZ 800 Roof Lanyard is a special category of personal equipment against falls from a height, especially intended for roof work where risk of fall over an edge egsist. The product conforms to EN354 standard and additionally was successfully tested for horizontal use and drop over an edge, according to VG11 CNB/P/11.060 sheet. | ANCHORAGE CONNECTOR |
|
|
|
CLIMBTECH BEAM TROLLEY 3"-10" BEAM 5000LB | ClimbTech Beam Trolley A removable and reusable rolling I-beam anchor, easy to place and remove. This anchor is designed to easilyroll along the beam while trailing the worker. Weight: 7.7lbs. Beam Flange Width: 3″ – 10″. Breaking Strength: 5,000 lbf / 22kN. Compliance: ANSI Z359 & CE-EN 795. | ANCHORAGE CONNECTOR |
|
|
|
CLIMBTECH 3/4" TOGGLE LOK ANCHOR RTL1020 | ClimbTech RTL Toggle Anchor Our newest anchor! This versatile, portable concrete/steel anchorage connector, used exclusively for fall protection, can be inserted inside precast concrete and steel flanges. Features: Size: 3/4″. Breaking Strength: 5,000 lbf / 22kN. Compliance: ANSI Z359 & CE-EN 795. Weight: 0.45-lbs. | ANCHORAGE CONNECTOR |
|
|
|
CLIMBTECH ANCHOR SWIVEL 5K ALLOY STEEL SAE 4140 YELLOW ZINC PLATED 1/2" THROUGH (SWIVEL ONLY) | CLIMBTECH MEGA Swivel 5K Anchor The 5K Swivel Anchor can be installed on concrete and steel structures with a variety of installation kits available to suit your application. The anchor incorporates a revolutionary swivel ring design that allows a D-ring to rotate 360 degrees as well as flip back and forth at 180 degrees. The Swivel Anchor’s incredible strength is due to a heavy gauge heat treated alloy steel, reinforced bridge, D-ring, and locking caps. Its patent pending key lock design... | ANCHORAGE CONNECTOR |
|
|
| CLIMTECH ANCHOR SWIVEL 5K CONCRETE ANCHOR W/ 1/2"X 4" G8 STEEL BOLT LOCK WASHER AND LOCK NUT | ClimbTech Zinc Plated Mega Swivel 5K Weighing only 386g (.85-lbs) the Swivel Anchor can be installed on concrete and steel structure with a variety of installation kits available to suit your application. Features: Weight: 0.8-lbs (.36kg). Breaking Strength: 5,000 lbf / 22kN. Compliance: ANSI Z359. | ANCHORAGE CONNECTOR |
|
||
|
CLIMBTECH BEAM WALKER SUPER SLIDER 3"-12" BEAM 5000LB | ClimbTech Super Slider I-Beam Anchor A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easilyglide along the beam while trailing the worker. Available in two sizes that are adjustable from 3”-12” and a 12”-30”with a flange thickness between .25” and 1.25” (2.5"" max thickness for the BWA030N). Range: 3.5″ to 12″. Breaking Strength: 5,000 lbf / 22kN. Weight: 3.5-lbs / 1.58 kg. Compliance: ANSI Z359 & CE-EN 795. | ANCHORAGE CONNECTOR |
|
|
| CLIMBTECH STRAIGHT LOOP INSERT KIT FOR WOOD INSTALLATION, 10000 POUNDS, 5/8 UNC, ORANGE | ClimbTech Straight Loop Insert The Straight Loop Insert is a pre-installed receptacle that is cast-in place during construction of the surface for the purpose of attaching an ANSI/OSHA certified anchorage connector once the concrete is cured to at least 3000psi. Features: Mechanical alternative to concrete anchor web straps. Breaking Strength of 10,000 lbs. Complies with both OSHA 1910.66 and OSHA 1926.502 and compatible with ANSI rated anchorage connectors. Easily identifiable due to the... | ANCHORAGE CONNECTOR |
|
||
|
CLIMBTECH 3/4" REMOVABLE CONRETE ANCHOR RB1015 | ClimbTech Raf075n RB Anchor One of our most popular RB anchors, this portable concrete anchorage connector can be used in a variety of fall protection applications.Features: Size: 3/4″ Breaking Strength: 5,000 lbf / 22kn Compliance: ANSI Z359.7 & CE-EN 795 Weight: 0.4-lbs | ANCHORAGE CONNECTOR |
|
|
| CLIMBTECH BEAM WALKER SUPER SLIDER 12"-30" BEAM 5000LB | ClimbTech Super Slider I-Beam Anchor A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easilyglide along the beam while trailing the worker. Available in two sizes that are adjustable from 3”-12” and a 12”-30”with a flange thickness between .25” and 1.25” (2.5"" max thickness for the BWA030N). Range: 12″ to 30″ Breaking Strength: 5,000 lbf / 22kN Weight: 7.4-lbs / 3.35 kg Compliance: ANSI Z359 & CE-EN 795 | ANCHORAGE CONNECTOR |
|
||
|
CLIMBTECH LADDER RESCUE SYSTEM 18FT LADDER WITHOUT BELAY SYSTEM | Basic Rescue Ladder Kit The Rescue Ladder Basic System is designed for rescuing a worker in the event of a fall with minimal prior rescue training. The system is simple to deploy using the existing or a temporary anchor point allowing the victim to climb safely. Components: -18ft webbed ladder -ClimbTech ANSI Z359.12 Steel Carabiner (30kN) -Deployment Bag | ANCHORAGE CONNECTOR |
|
|
|
HONOR TANK CLAMP, MOBILE ANCHOR DEVICE | TankClamp®Mobile Anchor on storage tanks, (concrete) pits, etc. The TankClamp® is a mobile anchor that can be placed over edges of storage tanks, (concrete) pits, beams, walls, etc. TankClamp can be used for both vertical fall arrest, rescue equipment and horizontal life line systems (HLL). Mobile Anchor facility for: Height Safety devices (inertia reels, etc.) Recovery blocks Lanyards (Temporary) Horizontal lifeline systems (like HONORope-T) Rescue systems and descent device’s... | ANCHORAGE CONNECTOR |
|
|
|
MILLER 416 D-BOLT ANCHOR W/O HARDWARE | Miller 416 D-Bolt Anchor W/O Hardware - 417Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchor or anchorage point. Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs (22kN) per worker.FeaturesThe Miller D-Bolt Anchor without hardware can be used with Miller approved 5/8" grade 8/18-8 bolt.This... | ANCHORAGE CONNECTOR |
|
|
|
MILLER STAINLESS STEEL 417SS/ D-BOLT ANCHOR W/O HARDWARE | Miller Stainless Steel - 417SS Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchor or anchorage point. Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs (22kN) per worker. Features This D-Bolt anchor is constructed of Drop Forge Alloy Steel for durability. The Miller D-Bolt Anchor without... | ANCHORAGE CONNECTOR |
|
|
|
MILLER GRIP ANCHORAGE CONNECTORS | Miller Grip Anchorage Connectors - 496For Use In Concrete Applications - A safe anchor point is established when the Miller Grip™ Anchor is inserted into a properly-sized, cured concrete hole. Designed for use in cured concrete with a compression strength of at least 3,000 psi (20.7 MPa) , it can be used for vertical or overhead/ceiling surface applications.Reusable -The Miller Grip™ anchor can be removed and simply re-installed in a new location.Mandatory Safety -A safe anchor point is... | ANCHORAGE CONNECTOR |
|