You have 0 items in your cart.
By Brands
PERSONAL FALL ARREST SYSTEM - PFAS
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
PROTEKT ROPE GRAB (STEEL) (FOR 14MM ROPE) | Protekt Rope Grab (Steel) - AC 012 Guided type fall arrester MINI BLOCMAX.Guided type fall arrester AC 012 intended for use with work rope AC 100, 14mm dia. Parameters of the device enable direct connection to safety harnesses – with no energy dissipater required. AC 012 is a guided-type fall arrester device on flexible anchorage guide. The rope grab is sliding on ø14 mm polyamide rope. AC 012 is a component of personal protective equipment against falls from a height. AC 012... | ROPE GRAB |
|
|
|
WORKSAFE® LINOSTOP II FIXED ROPE GRAB 5M DIA 12MM WITH ENERGY DISSIPATOR | WORKSafe® Linostop II Fixed Rope Grab 5M DIA 12MM The WORKSafe® Linostop II Fixed Rope Grab AC060 is an advanced fall protection system designed for use with kernmantle polyamide working ropes. This system features a stainless steel rope grab and includes a 5-meter rope with a 12mm diameter. The unit is equipped with an energy dissipator to reduce the impact forces in the event of a fall. Additionally, the galvanized steel snap hook, with an 18mm opening and a weight of 220g, ensures... | ROPE GRAB |
|
|
|
PROTEKT KERNMANTLE STATIC ROPE, 12MM X 100M | PROTEKT KERNMANTKE STATIC ROPE, 12MM X 100M Static Kernmantle is designed to equal or exceed the 2001 NFPA standards, and provides firm body and good shock mitigation | ROPE GRAB |
|
|
|
PROTEKT WORK POSITIONING LANYARD WITH AZ041T CONNECTOR, DIA 12MM LANYARD, 2M | Protekt Work Positioning Lanyard -PROT11 Work positioning device PROT11/011/002 length 2 m. Work positioning device PROT 11 comes with steel connectors AZ 002 (opening: 19mm) and AZ 011 (opening: 18mm). Standards EN 358 : 2000. | ROPE GRAB |
|
|
|
PROTEKT ROPE GRAB STAINLESS STEEL, 12MM DIA | Protekt Rope Grab (Steel) - SKR-BLOCK Guided type fall arrester MINI BLOCMAX.Guided type fall arrester SKR-BLOCK intended for use with polyester work rope AC 200, 12mm dia. The device should be connected to safety harnesses by an oval connector, e.g. AZ 011.The AC 040 device is a component of personal fall protection equipment. The device should be used with PROTEKT work ropes, 12mm dia. AC 012 is a guided-type fall arrester device on flexible anchorage guide. The rope grab is sliding on... | ROPE GRAB |
|
|
|
PROTEKT ROPE GRAB WITH ENERGY DISSIPATER+STD SNAP HOOK + ROPE LENGTH 20M | PROTEKT ROPE GRAB WITH ENERGY DISSIPATER+STD SNAP HOOK + ROPE LENGTH 20M Rope Grab: BLOCMAX guided type fall arrester with carabiner AZ 002. Guided type fall arrester BLOCMAX intended for use with polyester work rope AC 100, 14mm dia. The device comprises the following components: guided type mechanism. energy dissipater. energy dissipater steel connector - with snap hook AZ 002. The BLOCMAX device is a component of personal fall protection equipment. The device should be used with... | ROPE GRAB |
|
|
|
PROTEKT ROPE GRAB WITH ENERGY DISSIPATER+STD SNAP HOOK + ROPE LENGTH 10M | PROTEKT ROPE GRAB WITH ENERGY DISSIPATER+STD SNAP HOOK + ROPE LENGTH 10M Rope Grab: BLOCMAX guided type fall arrester with carabiner AZ 002. Guided type fall arrester BLOCMAX intended for use with polyester work rope AC 100, 14mm dia. The device comprises the following components: guided type mechanism. energy dissipater. energy dissipater steel connector - with snap hook AZ 002. The BLOCMAX device is a component of personal fall protection equipment. The device should be used with... | ROPE GRAB |
|
|
|
PROTEKT GUIDED TYPE FALL ARRESTER ON A FLEXIBLE ANCHORAGE LINE WITH HOOK AZ 002 | Protekt Guided Type Fall Arrester - AC010 BLOCMAX guided type fall arrester with carabiner AZ 002. Guided type fall arrester BLOCMAX intended for use with polyester work rope AC 100, 14mm dia. The device comprises the following components: guided type mechanism. energy dissipater. energy dissipater steel connector - with snap hook AZ 002. The BLOCMAX device is a component of personal fall protection equipment. The device should be used with PROTEKT work ropes, 14mm dia. | ROPE GRAB |
|
|
|
MILLER ROPE GRAB FALL ARRESTER DL-40 | About Honeywell Miller From harnesses to confined space systems, Miller specialises in all manner of fall protection products. | ROPE GRAB |
|
|
|
HEIGHTEC VECTOR FALL ASSESTER | Heightec Vector Fall Arrest Device - D23A versatile, multi-functional rope device designed specifically for roof work and ladder climbing.The VECTOR moves up and down freely with the user, allowing a high degree of flexibility whilst working.The VECTOR fall arrest device is designed for used on a vertical rope and for work restraint when used on level or sloping ground.Designed to be used on 10.5-11.0 mm diameter low stretch rope the VECTOR moves up and down freely with the user, allowing a... | ROPE ACCESS |
|
|
|
HEIGHTEC QUANTUM BACKUP DEVICE | Heightec Quantum Backup Device - D26 Supremely simple, high performance rope access back-up device. The QUANTUM rope access back-up device combines both innovation and excellence. It does not simply meet industry standards, it surpasses them. Rope access back up device is a supremely simple, high performance device. The QUANTUM back up device has a unique cam design that grips the rope in two places (patented), which allows an increased loading capability. It has minimum slippage during... | ROPE ACCESS |
|
|
|
HEIGHT WORKSEAT - 50CM | Heightec Workseat - MMWS1 Durable, padded workseat with adjustable webbing. Rope access workseat made of marine ply with closed cell foam padding and harness webbing for support straps. Fully adjustable with suspension points for tools or accessories. 50cm wide. Non PPE. Must be used in conjunction with a suspension harness. Features Fully adjustable. Suspension points for tools or accessories. | ROPE ACCESS |
|
|
|
HEIGHTEC GRATEMATE ROPE PROTECTOR | GRATEMATE – lightweight rope protector for metal or composite grating walkways GRATEMATE grating rope protector is specially designed for metal or composite grating walkways are known as ‘Kennedy grating’ found on offshore platforms and petrochemical as well as process sites. The two ropes pass through separate apertures to prevent rope-on-rope friction when in use. GRN (Glass Reinforced Nylon) plastic construction gives unrivaled strength and durability... | ROPE ACCESS |
|
|
|
HEIGHTEC RIGGING PLATE, BLUE, SMALL | Heightec Rigging Plate - AR02Rope arrangers used to organise rigging systems in rescue and rope access.Small alloy rigging plate with large dingle attachment point and three small attachment points.Forged construction gives high strength with reduced weight.Single multi attachment pints, simplifies rigging with multiple anchors.Single main attachment point – accepts up to three karabiners.Three subsidiary attachment points – 20 mm diameter for single karabiners.Size: 10 cm x 8 cm.Features36... | ROPE ACCESS |
|
|
|
HEIGHTEC PRISM DESCENDER | Heightec Prism Descender - D31 High specification multi-function rope access descender. Variable friction and high capacity rope access descender for abseiling, ascending, lowering, hauling and rescue. Multi functional PRISM descender specifically designed for rope access. High capacity rope descender can be used for abseiling, ascending, lowering, hauling and rescue. Multiple threading configurations provide different levels of friction. User can switch from one configuration to the... | ROPE ACCESS |
|
|
|
HEIGHTEC PULSAR HANDLED ASCENDER R/H | Heightec Pulsar Handled Ascender - D40 Rope Access handled ascender, incorporating X-Cam. Right handed, handled ascender rope access device. When tested on new Tectra 11 mm low stretch rope, these handled ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads up to 675 kg for X-cams versus 535 kg for the established design. However, the greatest increase in performance is exhibited if the ascender continues to be loaded after... | ROPE ACCESS |
|
|
|
HEIGHTEC PULSAR HANDLED ASCENDER L/H | Heightec Pulsar Handled Ascender - D40L For rope access climbing. Left handed, handled ascender rope access device. When tested on new Tectra 11 mm low stretch rope, these handled ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads up to 675 kg for X-cams versus 535 kg for the established design. However, the greatest increase in performance is exhibited if the ascender continues to be loaded after the sheath of the rope... | ROPE ACCESS |
|
|
|
HEIGHTEC TWIST CHEST ASCENDER | Heightec Twist Chest Ascender - D42 Rope access chest ascender incorporating X-Cam. Can be integrated into full harness or used to link sit & chest harnesses. The TWIST chest ascender rope access device has profiled attachment points and slimline design ensure that the TWIST sits flat against the chest of the user. The ergonomic catch allows single-handed operation. Detach-ability gives greater flexibility of use and economic replacement option. The materials and design used in... | ROPE ACCESS |
|
|
|
HEIGHTEC PULLEY, RESCUE PRO, 5CM, STAINLESS STEEL | Heightec Pulley Rescue Pro - P04 Stainless steel, single sheave, rescue pulley. Single stainless steel pulley features stainless steel side plates with nylon pulley wheel for corrosion resistance and reduced spark hazard. The wide opening swivelling plates offer easy attachment of the pulley to rope. The large attachment point on the pulley offers room for multiple connectors. Self lubricating bearing. The large diameter sheave on the pulley increases mechanical... | ROPE ACCESS |
|
|
|
PROTEKT DOUBLE RESCUE BLOCK TU431 | PROTEKT DOUBLE RESCUE BLOCK TU431 Double pulley made of aluminum with movable pads designed for setting up compound pulley systems. Also suitable for rescue applications. | ROPE ACCESS |
|