You have 0 items in your cart.
By Brands
FALL PROTECTION
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
SOLL CONNECTORS | Soll Connectors - 17440 (Spare Part of Söll GlideLoc Vertical Height Access System) The Söll GlideLoc® Safe Climbing system includes fall protection ladders, guide rails, and guided type fall arresters. System accessories such as entry and exit devices, roof ascent or shaft entry equipment make it possible to design a system that is not only appropriate for the structure of the building or installation, but which also satisfies the very highest safety requirements. Connector -... | HORIZONTAL & VERTICAL FIXED SYSTEMS |
|
|
|
SOLL STAINLESS STEEL HORIZONTAL SAFETY RAIL, LENGHT : 2.085M | Miller Soll Stainless Steel Horizontal Safety Rail - 17488Soll MultiRail stainless steel systemThe Soll MultiRail Stainless Steel Horizontal Rail System conforms to the latest European standard EN 795:2012 type D and CEN/TS 16415:2013 regulations for horizontal anchor devices. Söll MultiRail is not only for installation at foot level or overhead but can also be installed sideways for use as a handrail. The high quality stainless steel product line is resistant in the toughest environmental... | HORIZONTAL & VERTICAL FIXED SYSTEMS |
|
|
|
SOLL IDENTIFICATION PLATE | Safety Ladders: Aluminium Accessories Soll Identification Plate - 20881for Fall Protection Systems - Climbing Ladders. Cover plate assembled in factory. | HORIZONTAL & VERTICAL FIXED SYSTEMS |
|
|
|
SOLL TOP END-STOP, SPRING ACTIVATED | Soll Top End-Stop, spring activated - 21052Prevents the fall arrester from either being inserted incorrectly or accidentally slipping out of the guide-rail. For fitting to the very top of the ladder system. Comes with all fixings. Stainless steel, pickledWeight: 0,2 kg/eachPart No.21052 | HORIZONTAL & VERTICAL FIXED SYSTEMS |
|
|
|
SOLL LABEL FOR FALL ARRESTER SYSTEM - TYPE MULTIRAIL | Soll Label For Fall Arrester System - Type MultiRail - 21466For fall arrester system – type MultiRail. Normally one label per system included. | HORIZONTAL & VERTICAL FIXED SYSTEMS |
|
|
|
SOLL PIVOTLOC FOLDABLE LADDER SYSTEM (ALUM), 2.8M | Miller Soll Pivotloc Foldable Ladder System - 23193An innovative alternative to the ladder cover plate, the PivotLoc is a foldable ladder section for restricted access.Can be closed when not in use, preventing unwanted access.Can be locked open to prevent accidental closure.Can be used in conjunction with other ladder systems.A discrete profile only 105mm wide in the closed position.The wind resistance of the system is at a minimum when closed.Side rails offer additional support to the... | HORIZONTAL & VERTICAL FIXED SYSTEMS |
|
|
|
SOLL UNIVERSAL II TYPE FALL ARRESTER | Miller Soll Universal II Type Fall Arreste 23531Miller GlideLoc Vertical Height Access Ladder System Kits.An innovative solution for vertical climbing that is easy-to-use, requires minimal maintenance and provides superior safety.GlideLoc ComponentsUniversal II GlideLoc Fall Arrester - can be removed from the rail anywhere along the system enabling transfer onto platforms.Constructed of stainless steel and aluminum. | HORIZONTAL & VERTICAL FIXED SYSTEMS |
|
|
|
WORKSAFE® DOUBLE FINGER LOCKING TYPE SNAP HOOK | Detachable carabiner AZ 122 with "twist lock" gear | HOOKS & CARABINERS |
|
|
|
WORKSAFE® ALUMINIUM TWIST LOCK KARABINER, SILVER BLUE, 18MM GATE OPENING | WORKSAFE® Aluminium Twist Lock Karabiner – Silver Blue, 18mm Gate The WORKSAFE® Aluminium Twist Lock Karabiner offers secure connections in safety systems with an 18mm gate opening and a lightweight design of 80g. It is made from durable aluminium and is EN362 certified for reliability in fall protection applications. Specifications: Material: Aluminium Gate Opening: 18mm Weight: 80g Standards: Tested and approved to EN362 standards The WORKSAFE® Aluminium... | HOOKS & CARABINERS |
|
|
|
WORKGARD KARABINER | WORKGARD KARABINER Gate opening: 18mm Weight: 168g Tested and approved to EN362 | HOOKS & CARABINERS |
|
|
|
PROTEKT AZ011 SCREW SNAP HOOK KARABINER (WITH EN362 MARKINGS) | Protekt Screw Snap Hook Karabiner -AZ 011 Detachable carabiner AZ011 with locking gear. Specifications Ref. no. AZ011 Dimensions 110 x 60 mm Opening 18 mm Weight 160 g Material galvanized steel Static strength 25Kn Standards EN 362:2004 | HOOKS & CARABINERS |
|
|
|
MILLER TELESCOPIC POLE, LENGTH 4.6 M | MILLER TELESCOPIC POLE - 1015430 Used to remotely attach the rescue line to the fallen climber’s harness. Carabiner is held in an opened position. Collapses to 0.8m and extends to 3.45m. | HOOKS & CARABINERS |
|
|
|
WORKSAFE® TWIST LOCK 18MM OPENING KARABINER | Detachable carabiner AZ 011T with "twist lock" gear | HOOKS & CARABINERS |
|
|
|
HEIGHTEC ASTRA KARABINER, STEEL, OFFSET, SCREWGATE, 41KN | Heightec Astra Karabiner Steel Offset - CKS2 High strength (50kN major axis) steel karabiner with screwgate closure. High strength 41kN offset ASTRA Steel Offset Screwgate Karabiner. Screwgate closure with 22 mm gate clearance with a captive bar. 50kN major axis. Good gate opening to fit over 22 mm round bar. Plated steel for strength and corrosion resistance. Features 50kN major axis, 15kN minor axis, 15kN major axis - gate open. Screwgate closure. Plated Steel. | HOOKS & CARABINERS |
|
|
|
HEIGHTEC SCREWLINK PEAR, 10MM | Heightec Screwlink Pear - CSP10For rigging multiple connections in anchor lines or pulley systems.This 36kN (major axis) Pear Steel Screwlink allows several connections to be made simultaneously.It is most useful for rigging pulley systems where twin pulleys are not available and single pulleys must be attached side by side.It is essential to ensure the screw barrel is fully closed during use.Used in a range of heightec work and rescue systems. | HOOKS & CARABINERS |
|
|
|
HONEYWELL ANSI Z359-2007 COMPLIANT AUTOMATIC TWIST-LOCK STEEL CARABINER, 1" GATE OPENING | Miller Honeywell Twist-Lock Steel Carabiner - 17D-1-Miller twist lock carabiners with spring loaded keepers are used as anchorage connectors. The 17D-1 has a 1” gate opening, and is plated to resist rust and corrosion.CertificationMeets or exceeds OSHA 1926.502, ANSI Z359-2007 and CSA Z259.12 requirements.ANSI Z359-2007 compliant for connectors which meet the 3,600lb gate requirements. | HOOKS & CARABINERS |
|
|
|
MILLER REBAR WEB ASSEMBLY WITH LOCKING REBAR HOOK AND TWO LOCKING SNAP HOOKS | Miller Rebar Web Assembly With Locking Rebar Hook - 6757WRS-Z7-35INGN The 6757WRS-Z7/35INGN rebar web assembly from Miller by Honeywell can be used in tandem with a wide range of harnesses and safety belts. This particular unit connects easily to awkwardly shaped rebar and steel base points with a locking rebar hook with a 2 ½” gate which is connected via a 1” super tough polyester webbing to two locking snap hooks with ¾“ gates. The entire system is rated to safely hold 400lbs and the... | HOOKS & CARABINERS |
|
|
|
WORKSAFE® DOUBLE FINGER LOCKING TYPE SNAP HOOK | Detachable carabiner AZ 125 with "twist lock" gear | HOOKS & CARABINERS |
|
|
|
WORKSAFE® SCREWGATE STEEL KARABINER, 18MM OPENING, EN362 CERTIFIED | WORKSAFE® Screwgate Steel Karabiner – 18mm Opening The WORKSAFE® Screwgate Steel Karabiner is designed for secure connections in safety systems with an 18mm opening. It is made from durable steel and tested to EN362, CE0120, and Singapore Standard SS402, ensuring reliability and compliance with industry safety standards. Specifications: Material: Steel Opening: 18mm Standards: Tested and approved to EN362, CE0120, and SS402 standards The WORKSAFE® Screwgate Steel... | HOOKS & CARABINERS |
|
|
|
PROTEKT DOUBLE FINGER LOCKING TYPE SNAP HOOK, OPENING 60MM | Protekt Double Finger Locking Type Snap Hook - AZ 023Scaffold hook AZ 023 with locking gear. | HOOKS & CARABINERS |
|