You have 0 items in your cart.
By Brands
FALL PROTECTION
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
WORKSAFE SELF-FITTING STEEL ROPE GRAB DEVICE WITH ENERGY ABSORBER | WORKSAFE SELF-FITTING STEEL ROPE GRAB DEVICE The WORKSafe AC011 Self-Fitting Steel Rope Grab Device is designed for reliable fall protection, featuring a galvanised steel construction with an integrated energy absorber for enhanced user safety. This rope grab device is suitable for use with 14mm diameter ropes and supports a maximum load of up to 140kg, making it ideal for industrial height safety applications. Built to comply with EN 353-2 standards and tested in accordance with recognised PPE... | ROPE GRAB |
|
|
|
PROTEKT AUXILIARY EVACUATION DEVICE | AR 020 - Auxiliary Evacuation Device The AR020 auxiliary evacuation kit is used to support the evacuation operation when it is not possible to use the knife to cut off the injured person’s rope (e.g. the fall was stopped by means of a self-locking device with a steel rope). The AR020 support kit can be used to support evacuation using the MK-II (AR010) device. ATTENTION!!! The AR020 Auxiliary Evacuation Set is not fall-protection equipment and cannot be used for such purposes. | ROPE GRAB |
|
|
|
PROTEKT WORK POSITIONING DEVICE (PROT 3) C/W AZ002AS SNAP HOOK, , LENGTH 3M | PROTEKT WORK POSITIONING DEVICE (PROT 3) C/W AZ002AS SNAP HOOK, , LENGTH 3M | ROPE GRAB |
|
|
|
WORKSAFE® ROPE GRAB GALVANIZED STEEL FOR 14MM ROPE | WORKSafe® Rope Grab for 14MM Rope The WORKSafe® Rope Grab AC012 is a reliable fall arrester made from galvanized steel, designed for use with 14mm working ropes. It operates as a guided-type fall arrester on a flexible anchorage line, ensuring secure and efficient fall protection. This rope grab has been tested and approved to EN353-2 standards, guaranteeing optimal safety for workers in various environments. Specifications: Brand: WORKSafe Type: Rope Grab Material: Galvanized... | ROPE GRAB |
|
|
|
WORKSAFE® GUIDED TYPE FALL ARRESTER, RED, LIGHTWEIGHT ALUMINIUM | WORKSafe® Guided Type Fall Arrester, Red The WORKSafe® Guided Type Fall Arrester (Red) is an essential fall protection device designed for use with 12mm kernmantle polyester rope (AC300). Made from lightweight forged aluminium alloy, weighing just 194g, this fall arrester offers reliable and secure fall arrest capabilities on a flexible anchorage line. It is available in standard lengths of 10m, 20m, and 30m, with other lengths available on request. Tested and approved to EN... | ROPE GRAB |
|
|
|
WORKSAFE® KERNMANTLE WORKING ROPE 10M DIA 14MM WITH STEEL SNAP HOOK | WORKSafe® Kernmantle Working Rope 10M DIA 14MM The WORKSafe® Kernmantle Working Rope AC100 is a high-performance fall protection system designed for safety and flexibility. This 10-meter rope features a 14mm diameter and is equipped with a steel rope grab, providing secure fall arrest capabilities. Additionally, the galvanized steel snap hook ensures a reliable connection, with an 18mm opening and a weight of 220g. The rope includes an energy dissipator to further reduce the risk of... | ROPE GRAB |
|
|
|
WORKSAFE® KERNMANTLE WORKING ROPE 5M DIA 12MM WITH ROPE GRAB | The WORKSafe® Kernmantle Working Rope AC200 is a high-quality, flexible fall protection solution designed for safety and reliability. Featuring a 12mm diameter, the rope is equipped with a stainless steel rope grab, allowing secure use on guided fall arrest systems. This 5-meter rope is tested and approved to EN3532 standards, ensuring optimal safety in various working environments. Specifications: Brand: WORKSafe Type: Kernmantle Working Rope with Stainless Steel Rope Grab Rope... | ROPE GRAB |
|
|
|
WORKSAFE® BAG, RED COLOUR | WORKSafe® TRIPOD BAG FOR TM-9 Equipment: Adjustable shoulder straps, Wide opening with a drawstring. Material: Reinforced PVC Weight: 600 g Dimensions: 450 x 380 x 380 mm Capacity: 36 L | ROPE GRAB |
|
|
|
WORKSAFE AT 300 TWO-POINT RESCUE LIFTING SLING STANDARDS, EN 354, EN 358 (AT300011011011000000) | WORKSAFE AT 300 TWO-POINT RESCUE LIFTING SLING STANDARDS, EN 354, EN 358 (AT300011011011000000) Model: WORKSafe® AT 300 Type: Two-Point Rescue Lifting Sling Standards Approved: EN 354, EN 358 | ROPE GRAB |
|
|
|
PROTEKT DOUBLE RESCUE BLOCK TU431 | PROTEKT DOUBLE RESCUE BLOCK TU431 Double pulley made of aluminum with movable pads designed for setting up compound pulley systems. Also suitable for rescue applications. | ROPE ACCESS |
|
|
|
HEIGHTEC PULLEY, RESCUE PRO, 5CM, STAINLESS STEEL | Heightec Pulley Rescue Pro - P04 Stainless steel, single sheave, rescue pulley. Single stainless steel pulley features stainless steel side plates with nylon pulley wheel for corrosion resistance and reduced spark hazard. The wide opening swivelling plates offer easy attachment of the pulley to rope. The large attachment point on the pulley offers room for multiple connectors. Self lubricating bearing. The large diameter sheave on the pulley increases mechanical... | ROPE ACCESS |
|
|
|
HEIGHTEC TWIST CHEST ASCENDER | Heightec Twist Chest Ascender - D42 Rope access chest ascender incorporating X-Cam. Can be integrated into full harness or used to link sit & chest harnesses. The TWIST chest ascender rope access device has profiled attachment points and slimline design ensure that the TWIST sits flat against the chest of the user. The ergonomic catch allows single-handed operation. Detach-ability gives greater flexibility of use and economic replacement option. The materials and design used in... | ROPE ACCESS |
|
|
|
HEIGHTEC PULSAR HANDLED ASCENDER L/H | Heightec Pulsar Handled Ascender - D40L For rope access climbing. Left handed, handled ascender rope access device. When tested on new Tectra 11 mm low stretch rope, these handled ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads up to 675 kg for X-cams versus 535 kg for the established design. However, the greatest increase in performance is exhibited if the ascender continues to be loaded after the sheath of the rope... | ROPE ACCESS |
|
|
|
HEIGHTEC PULSAR HANDLED ASCENDER R/H | Heightec Pulsar Handled Ascender - D40 Rope Access handled ascender, incorporating X-Cam. Right handed, handled ascender rope access device. When tested on new Tectra 11 mm low stretch rope, these handled ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads up to 675 kg for X-cams versus 535 kg for the established design. However, the greatest increase in performance is exhibited if the ascender continues to be loaded after... | ROPE ACCESS |
|
|
|
HEIGHTEC PRISM DESCENDER | Heightec Prism Descender - D31 High specification multi-function rope access descender. Variable friction and high capacity rope access descender for abseiling, ascending, lowering, hauling and rescue. Multi functional PRISM descender specifically designed for rope access. High capacity rope descender can be used for abseiling, ascending, lowering, hauling and rescue. Multiple threading configurations provide different levels of friction. User can switch from one configuration to the... | ROPE ACCESS |
|
|
|
HEIGHTEC RIGGING PLATE, BLUE, SMALL | Heightec Rigging Plate - AR02Rope arrangers used to organise rigging systems in rescue and rope access.Small alloy rigging plate with large dingle attachment point and three small attachment points.Forged construction gives high strength with reduced weight.Single multi attachment pints, simplifies rigging with multiple anchors.Single main attachment point – accepts up to three karabiners.Three subsidiary attachment points – 20 mm diameter for single karabiners.Size: 10 cm x 8 cm.Features36... | ROPE ACCESS |
|
|
|
HEIGHTEC GRATEMATE ROPE PROTECTOR | GRATEMATE – lightweight rope protector for metal or composite grating walkways GRATEMATE grating rope protector is specially designed for metal or composite grating walkways are known as ‘Kennedy grating’ found on offshore platforms and petrochemical as well as process sites. The two ropes pass through separate apertures to prevent rope-on-rope friction when in use. GRN (Glass Reinforced Nylon) plastic construction gives unrivaled strength and durability... | ROPE ACCESS |
|
|
|
HEIGHT WORKSEAT - 50CM | Heightec Workseat - MMWS1 Durable, padded workseat with adjustable webbing. Rope access workseat made of marine ply with closed cell foam padding and harness webbing for support straps. Fully adjustable with suspension points for tools or accessories. 50cm wide. Non PPE. Must be used in conjunction with a suspension harness. Features Fully adjustable. Suspension points for tools or accessories. | ROPE ACCESS |
|
|
|
HEIGHTEC QUANTUM BACKUP DEVICE | Heightec Quantum Backup Device - D26 Supremely simple, high performance rope access back-up device. The QUANTUM rope access back-up device combines both innovation and excellence. It does not simply meet industry standards, it surpasses them. Rope access back up device is a supremely simple, high performance device. The QUANTUM back up device has a unique cam design that grips the rope in two places (patented), which allows an increased loading capability. It has minimum slippage during... | ROPE ACCESS |
|
|
|
HEIGHTEC VECTOR FALL ASSESTER | Heightec Vector Fall Arrest Device - D23A versatile, multi-functional rope device designed specifically for roof work and ladder climbing.The VECTOR moves up and down freely with the user, allowing a high degree of flexibility whilst working.The VECTOR fall arrest device is designed for used on a vertical rope and for work restraint when used on level or sloping ground.Designed to be used on 10.5-11.0 mm diameter low stretch rope the VECTOR moves up and down freely with the user, allowing a... | ROPE ACCESS |
|