By Brands

FALL PROTECTION

Filter

Search

a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z

	Name	SKU	Description	Category
	PROTEKT AT061 ALU ANCHOR BEAM + BAG		Protekt ALU Anchor Beam + Bag - AT061 Light aluminium alloy anchor beam AT 061 is a component of fall protection equipment and can be used as a portable anchor device. The beam can be used in building openings (windows and doors), 300 to 1270mm wide. It is fitted with two fixing plates.	ANCHORAGE CONNECTOR
	PROTEKT SCREW CLIP (STAINLESS STEEL)		PROTEKT AC930 Screw Clip When the screw is turned, it acts as a worm drive pulling the threads of the band, causing the band to tighten around the hose (or when screwed the opposite direction, to loosen). Screw clamps are normally used for hoses 1/2 inch diameter and up, with other clamps used for smaller hoses.	ANCHORAGE CONNECTOR
	PROTEKT 3 POINT END STRUCTURAL ANCHOR POINT		PROTEKT 3 POINT END STRUCTURAL ANCHOR POINT	ANCHORAGE CONNECTOR
	PROTEKT ALU ANCHOR CLAMP, DIMENSIONS: 440 X 100 X 45MM FOR ONE WORKER		Protekt ALU Anchor Clamp - AT250 The AT 250 catch device is a portable anchor point, adapted to work with a rail with an I-section cross-section. The rail must be permanently attached to the fixed structure.	ANCHORAGE CONNECTOR
	PROTEKT SLIDER OPENABLE (DUO SYSTEM ONLY)		PROTEKT SLIDER OPENABLE (DUO SYSTEM ONLY) Stainless steel, 0.43kg.	ANCHORAGE CONNECTOR
	PROTEKT LINE HOLDER (STAINLESS STEEL)		PROTEKT AC921 Line Guide Wire A device used to enter tight spaces, e.g., obstructed valves or channels, within the body, or to assist in inserting, positioning, and moving a catheter.	ANCHORAGE CONNECTOR
	PROTEKT ANCHOR PLATE (STAINLESS STEEL)		PROTEKT ANCHOR PLATE (STAINLESS STEEL) 3-point mounting plate for rungs (galvanized steel/stainless steel)	ANCHORAGE CONNECTOR
	PROTEKT 4 POINT LADDER RUNG MOUNTING PLATE (STAINLESS STEEL)		PROTEKT 4 POINT LADDER RUNG MOUNTING PLATE (STAINLESS STEEL)	ANCHORAGE CONNECTOR
	PROTEKT PERMANENT ANCHOR POINT		Protekt Permanent Anchor Point - AT150 Anchor AT150 is a pernament anchor point to be fixed to a rigid construction. Mechanical anchor included. This AT150 permanent single anchor point is designed to protect a fall arrest system against falling at height from a fixed anchor point.	ANCHORAGE CONNECTOR
	PROTEKT ATTACHMENT, I-BEAM FLANGE : 300MM		PROTEKT ATTACHMENT, I-BEAM FLANGE : 300MM On steel beams with a flange a Steel beam clamp can be mounted in order to quickly create an attachment for temporary edge protection. Using steel beam as attachment creates a free surface on the slab and can be used for other work tasks. The safety barriers will then be positioned outside the working space. The clamp is designed so that is has jaws that grip the steel beam profile. The steel beam clamp has an integrated attachment for posts. Barriers...	ANCHORAGE CONNECTOR
	PROTEKT INTERMEDIATE STRUCTURAL ANCHOR POINT [PROLINER]		PROTEKT INTERMEDIATE STRUCTURAL ANCHOR POINT [PROLINER]	ANCHORAGE CONNECTOR
	PROTEKT PROLINER TROLLEY		PROTEKT PROLINER TROLLEY The trolley is the system’s mobile anchor point for personal fall protection equipment. It enables mobility along the system while providing fall protection in the vertical.	ANCHORAGE CONNECTOR
	PROTEKT MONOLINE TROLLEY		PROTEKT MONOLINE TROLLEY The trolley is the system’s mobile anchor point for personal fall protection equipment. It enables mobility along the system while providing fall protection in the vertical.	ANCHORAGE CONNECTOR
	PROTEKT TURN ROLL - SET (INCL. HL407/408 PIN SET)		PROTEKT TURN ROLL - SET (INCL. HL407/408 PIN SET) Horizontal line anchor system PROLINER is a C class anchor device conforming to EN 795 and CEN /TS 16415. The system is intended for use by maximum 3 users at the same time. All the PROLINER system components are made of stainless steel. The trolley is the system’s mobile anchor point for personal fall protection equipment. It enables mobility along the system while providing fall protection in the vertical. The anchor line being trolley’s...	ANCHORAGE CONNECTOR
	PROTEKT STAINLESS STEEL CABLE 8 MM WITH RIGID EYE		PROTEKT STAINLESS STEEL CABLE 8 MM WITH RIGID EYE The system is intended to be mounted on ladders, chimneys, towers, masts or buildings. The system serves as protection for 2 persons. Guided-type fall arrester on a rigid anchorage line, which complies with the EN 353-1 standard	ANCHORAGE CONNECTOR
	PROTEKT 2 POINT MOUNTING PLATE		PROTEKT 2-point Mounting Plate	ANCHORAGE CONNECTOR
	PROTEKT SWAGLES WITH HOLE		PROTEKT SWAGLES WITH HOLE Cable clip with opening	ANCHORAGE CONNECTOR
	PROTEKT PARAPET ANCHOR POINT AT254, STEEL, 12 KN, 2 USERS		The Protekt Parapet Anchor Point AT254 is designed for securing up to 2 users simultaneously, offering reliable fall protection on firewalls, sheet metal, and other structures. Made from durable steel with a robust galvanized finish, this anchor point provides a static strength of 12 kN, ensuring safety in high-risk environments. The 700 x 350 x 100 mm frame is designed for easy mounting on firewalls, window sills, or walls with a minimum thickness of 12 mm. The anchor point features a movable...	ANCHORAGE CONNECTOR
	PROTEKT STAINLESS STEEL PIPE CLAMP, 0.3 KG ( AT241-002_S-A2\|WG)		Protekt Stainless Steel Pipe Clamp (AT241-002_S-A2\|WG) Material: Stainless Steel Weight: 0.3 kg Application: Pipe security and fastening in industrial environments	ANCHORAGE CONNECTOR
	PROTEKT AT021 CONCRETE ANCHOR POINT, 12 KN, EASY TO MOUNT, 1 USER, FALL PROTECTION, EN 795/B STANDARD		The Protekt AT021 Concrete Anchor Point is an easy-to-mount fall protection solution for securing one user at a time. Designed for permanent structures, this anchor point offers 12 kN static strength, making it ideal for safety in industrial environments. It’s made from a combination of galvanized steel, stainless steel, and aluminum for durability and long-term performance. With 329 x 45 x 45 mm dimensions, the anchor is compact and versatile, suitable for installation on concrete...	ANCHORAGE CONNECTOR

Start
Prev
1
2
3
4
5
6
Next
End