You have 0 items in your cart.
By Brands
Safety Sam
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
OLDHAM REPLACEMENT PLUG-IN IR COMBUSTIBLE GAS SENSOR | Oldham Replacement Plug-In Ir Combustible Gas Sensor The Oldham iTrans fixed-point gas monitor employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. | SPARE PARTS |
|
|
|
OLDHAM ITRANS 2 NH3 GAS DETECTOR, (4-20 MA OUTPUT: 0 -500 PPM) | Oldham Itrans 2 Nh3 Gas Detector, (4-20 Ma Output: 0 -500 Ppm) Oldham iTrans 2 Fixed Gas Detector with electrochemical smart sensor for Ammonia (NH3) 0-500ppm. 4-20mA optional RS-485 Modbus/HART and 3 alarm relay outputs. Explosion-proof NEMA 4X Enclosure. IP66. CSA, ATEX and IECEx Approvals. | SPARE PARTS |
|
|
|
OLDHAM ITRANS 2 LEL GAS DETECTOR | Oldham Itrans 2 Lel Gas Detector Oldham iTrans 2 Stand-Alone Gas Detector with catalytic smart sensor for Combustibles 0-100% LEL. 4-20mA. NEMA 4X/IP66 Enclosure to be installed in safe area only (Non-Explosion Proof, no relays nor Modbus/HART available) Factory configured for Methane or Pentane. CharacteristicsLarge Sensor Offering – Electrochemical, Catalytic and InfraredNon-Intrusive CalibrationSmart SensorHART (optional)RS-485 ModbusProgrammable Relays (optional)Dual Gas Sensing... | SPARE PARTS |
|
|
|
OLDHAM BM 25 DATALINK ADAPTER KIT (SOFTWARE W/USB ADAPTER CABLE) | Oldham Bm 25 Datalink Adapter Kit (Software W/Usb Adapter Cable) BM25 Datalink Adapter Kit (Software w/USB Adapter Cable) for use with the Oldham BM25 Area Gas Monitor | SPARE PARTS |
|
|
| EAR MUFF POUCH, WIDTH : 12 CM | EAR MUFF POUCH, WIDTH : 12 CM | SPARE PARTS |
|
||
|
WKS SINGLE STAGE OXYGEN REGULATOR (P/N: 452X-175) | Wks Single Stage Oxygen Regulator (P/N: 452X-175) 1. Gentec Single Stage Oxygen Regulator (P/N: 452X-175) a. Max Inlet Pressure (207 Bar/3000 PSI) b. Max Outlet Pressure (12 Bar/175 PSI) c. UL Certified d. Ideal for soldering and casting torches for monitoring pressure valves e. Comes with self re-seating external safety pressure relief valve | SPARE PARTS |
|
|
|
ALPHASENSE O2-A2 OXYGEN SENSOR | Alphasense O2-A2 Oxygen Sensor The AlphaSense O2-A2 oxygen sensor is a replacement sensor for hand-held gas detectors that use an O2-A2 sensor. Features Electrochemical (EC) sensor designed to last for up to 2 years Good pressure and temperature independence Small, compact & maintenance free The EC board or development kit converts the sensor’s analog output current to a voltage that is measured by a high-resolution analog to digital converter. The digital voltage is corrected and... | SPARE PARTS |
|
|
|
PLASTIC TUBE | Plastic Tube [Features]・ Flexible.・ Polyurethane tube.・ Added 21 new colors.[Applications]・ For general pneumatic piping. | SPARE PARTS |
|
|
|
MILLER RELIEF STEP SAFETY DEVICES | Miller Relief Step Safety Devices - 9099 A Miller Relief Step attaches to each side of a full-body harness on the hip and are deployed by a fallen worker who sees that rescue may be at least a few minutes in coming. Suspension trauma affects the blood flow of a fallen worker and can serious injure the brain and the body's vital organs. The Relief Steps are polyester loops that the worker can step into once they are deployed so that the pressure is on the bottom of the feet and not on the straps... | SPARE PARTS |
|
|
|
SCOTT PROTéGé IR CONNECT WITH USB CABLE | Scott Protégé Ir Connect With Usb Cable The Scott Safety Protégé IR Connect settings programmer comes in black and is for use with Protégé ZM gas monitors and/or docking station. This product comes with the following: USB Cable. | SPARE PARTS |
|
|
|
SCOTT PROTéGé ZM PORTABLE TEST STATION | Scott Protégé Zm Portable Test Station The Protégé ZM Portable Test Station performs bumping, calibrating, programming and hibernating of up to four Protégé ZM monitors simultaneously. The test station stores monitor event data and test data logs. It is designed to be used with 34 - 103L bottles of calibration gas. Bump, Calibrate, Program and Hibernate up to four Protégé ZM monitors at onceAutomatically configure monitors during testingIntuitive to use with simple two button... | SPARE PARTS |
|
|
|
SCOTT PROFLOW BAYONET TO FIT ON DIN40 THREAD | Proflow Bayonet Adaptor | SPARE PARTS |
|
|
|
GRAYWOLF TRIPOD KIT FOR MOUNTING ADVANCEDSENSE OR TABLET, DIRECTSENSE PROBE AND FM-801 (OR 2ND DS PROBE) AND PM-205 OR PC-3016. INCLUDES RUGGED ACC-TPD1 TRIPOD AND MOUNTING HARDWARE (3), PLUS PCC-07T SOFT CASE | Graywolf Tripod Kit ACC-TPD1-KIT ACC-TPD1 Large, rugged tripod for multiple DirectSense probes, AdvancedSense meter, PC-3016, PC-3500 or PM-205 particulate meter and/or FM-801 formaldehyde meter. 19.25″ (49cm) min, 47″(120cm) max | SPARE PARTS |
|
|
|
GRAYWOLF TRIPOD KIT INCLUDES RUGGED ACC-TPD1 TRIPOD AND MOUNTING HARDWARE (3), PLUS PCC-07T SOFT CASE. | Gratwolf Tripod Kit ACC-TPDL-KIT ACC-TPDL-KIT Tripod Kit for mounting AdvancedSense or tablet, DirectSense probe, FM-801 (or 2nd DS probe) and PM-205 or PC-3016. Includes rugged ACC-TPD1 tripod and mounting hardware (ACC-MNT1/MNT2P/MNT3), plus PCC-07T soft case. | SPARE PARTS |
|
|
|
GRAYWOLF 1M CABLE FOR DIRECTSENSE II PROBES TO CONNECT TO TABLETS/LAPTOPS/PCS | Graywolf 1M Cable For Directsense For 20 years, GrayWolf has been transforming the way that environmental measurements are taken. And now we have acted on the feedback from our many worldwide IAQ, HVAC, IH and Green Building customers to introduce a range of very smart probes with highly advanced features. Part No. : AD-DSIIUSB-1M | SPARE PARTS |
|
|
|
GRAYWOLF ADAPTER CABLE, 1M, TO INTERFACE PC-GW4000 PARTICLE COUNTERS VIA THE ADVANCEDSENSE 7 PIN BOTTOM LEMO SOCKET | Graywolf Adapter Cable AD-L71M-PC4000 Adapter cable, 1m, to interface PC-GW4000/5 Particle Counters via the AdvancedSense 7 pin bottom Lemo-type socket. | SPARE PARTS |
|
|
|
GRAYWOLF CONNECTION CABLE 1M; ADVANCEDSENSE OR WOLFPACK | Graywolf Connection Cable 1M; Advancedsense Or Wolfpack Cable for connecting AdvancedSense/WolfPack to external storage device (such as USB key pictured here) for download/upload of files. Also for AdvancedSense Pro to specific IR cameras and borescopes. | SPARE PARTS |
|
|
|
GRAYWOLF PROBE ADAPTER, 15CM, FOR LAPTOP PCS, 8 PIN LEMO-TYPE TO STANDARD USB CONNECTOR | Graywolf Probe Adapter - AD-L8-USBS 8 pin Lemo to standard USB probe adapter. 15CM. For LAPTOP PCS. | SPARE PARTS |
|
|
|
GRAYWOLF 1M CABLE WITH 5-PIN MALE SWITCHCRAFT AND 8-PIN MALE LEMO CONNECTORS FOR ADAPTING SWITCHCRAFT PRODE TO ADVANCEDSENCE METERS | GRAYWOLF 1M CABLE WITH 5-PIN MALE SWITCHCRAFT | SPARE PARTS |
|
|
|
HOWARD LEIGHT HYGIENE KIT FOR QM24 | Howard Hygiene Kit for QM24+ For extended earmuff performance and improved hygiene.Pairs replacement adhesive ear cushions and foam inserts. FEATURES Includes one pair of replacement ear cushions and one pair of foam inserts. Extends performance and lifetime of earmuff. Recommended replacement every 6 months with general use, more frequently with heavy use. Snap-in ear cushions are standard on all Howard Leight earmuffs. Click here for catalogue | SPARE PARTS |
|