You have 0 items in your cart.
By Brands
Safety Sam
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
HEIGHTEC PULLEY, RESCUE PRO, 5CM, STAINLESS STEEL | Heightec Pulley Rescue Pro - P04 Stainless steel, single sheave, rescue pulley. Single stainless steel pulley features stainless steel side plates with nylon pulley wheel for corrosion resistance and reduced spark hazard. The wide opening swivelling plates offer easy attachment of the pulley to rope. The large attachment point on the pulley offers room for multiple connectors. Self lubricating bearing. The large diameter sheave on the pulley increases mechanical... | ROPE ACCESS |
|
|
|
HEIGHTEC TWIST CHEST ASCENDER | Heightec Twist Chest Ascender - D42 Rope access chest ascender incorporating X-Cam. Can be integrated into full harness or used to link sit & chest harnesses. The TWIST chest ascender rope access device has profiled attachment points and slimline design ensure that the TWIST sits flat against the chest of the user. The ergonomic catch allows single-handed operation. Detach-ability gives greater flexibility of use and economic replacement option. The materials and design used in... | ROPE ACCESS |
|
|
|
HEIGHTEC PULSAR HANDLED ASCENDER L/H | Heightec Pulsar Handled Ascender - D40L For rope access climbing. Left handed, handled ascender rope access device. When tested on new Tectra 11 mm low stretch rope, these handled ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads up to 675 kg for X-cams versus 535 kg for the established design. However, the greatest increase in performance is exhibited if the ascender continues to be loaded after the sheath of the rope... | ROPE ACCESS |
|
|
|
HEIGHTEC PULSAR HANDLED ASCENDER R/H | Heightec Pulsar Handled Ascender - D40 Rope Access handled ascender, incorporating X-Cam. Right handed, handled ascender rope access device. When tested on new Tectra 11 mm low stretch rope, these handled ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads up to 675 kg for X-cams versus 535 kg for the established design. However, the greatest increase in performance is exhibited if the ascender continues to be loaded after... | ROPE ACCESS |
|
|
|
HEIGHTEC PRISM DESCENDER | Heightec Prism Descender - D31 High specification multi-function rope access descender. Variable friction and high capacity rope access descender for abseiling, ascending, lowering, hauling and rescue. Multi functional PRISM descender specifically designed for rope access. High capacity rope descender can be used for abseiling, ascending, lowering, hauling and rescue. Multiple threading configurations provide different levels of friction. User can switch from one configuration to the... | ROPE ACCESS |
|
|
|
HEIGHTEC RIGGING PLATE, BLUE, SMALL | Heightec Rigging Plate - AR02Rope arrangers used to organise rigging systems in rescue and rope access.Small alloy rigging plate with large dingle attachment point and three small attachment points.Forged construction gives high strength with reduced weight.Single multi attachment pints, simplifies rigging with multiple anchors.Single main attachment point – accepts up to three karabiners.Three subsidiary attachment points – 20 mm diameter for single karabiners.Size: 10 cm x 8 cm.Features36... | ROPE ACCESS |
|
|
|
HEIGHTEC GRATEMATE ROPE PROTECTOR | GRATEMATE – lightweight rope protector for metal or composite grating walkways GRATEMATE grating rope protector is specially designed for metal or composite grating walkways are known as ‘Kennedy grating’ found on offshore platforms and petrochemical as well as process sites. The two ropes pass through separate apertures to prevent rope-on-rope friction when in use. GRN (Glass Reinforced Nylon) plastic construction gives unrivaled strength and durability... | ROPE ACCESS |
|
|
|
HEIGHT WORKSEAT - 50CM | Heightec Workseat - MMWS1 Durable, padded workseat with adjustable webbing. Rope access workseat made of marine ply with closed cell foam padding and harness webbing for support straps. Fully adjustable with suspension points for tools or accessories. 50cm wide. Non PPE. Must be used in conjunction with a suspension harness. Features Fully adjustable. Suspension points for tools or accessories. | ROPE ACCESS |
|
|
|
HEIGHTEC QUANTUM BACKUP DEVICE | Heightec Quantum Backup Device - D26 Supremely simple, high performance rope access back-up device. The QUANTUM rope access back-up device combines both innovation and excellence. It does not simply meet industry standards, it surpasses them. Rope access back up device is a supremely simple, high performance device. The QUANTUM back up device has a unique cam design that grips the rope in two places (patented), which allows an increased loading capability. It has minimum slippage during... | ROPE ACCESS |
|
|
|
HEIGHTEC VECTOR FALL ASSESTER | Heightec Vector Fall Arrest Device - D23A versatile, multi-functional rope device designed specifically for roof work and ladder climbing.The VECTOR moves up and down freely with the user, allowing a high degree of flexibility whilst working.The VECTOR fall arrest device is designed for used on a vertical rope and for work restraint when used on level or sloping ground.Designed to be used on 10.5-11.0 mm diameter low stretch rope the VECTOR moves up and down freely with the user, allowing a... | ROPE ACCESS |
|
|
|
CLIMBTECH ANCHOR SLING, ROLLER, 24" | ClimbTech Roller Sling CBL-SLNG-RLR 24 ANSI Z359 certified anchorage connector with sealed ball bearing rollers and spaces for ease while working on bridges or around pipe where other anchor points aren’t prevalent. Steel carabiner not included. Features: Available in 24″ and 36″ lengths. Breaking Strength: 5,000 lbf / 22kn. Compliance: ANSI Z359hor. | STEEL SLING |
|
|
|
HEIGHTEC SLING, STEEL, 7MM, 0.5M | Heightec Sling Steel - A050Steel anchor strop with swaged eyes including stainless thimble.Used to provide a durable temporary anchor for rescue systems and access equipment where no fixed anchor points are available. A strong and flexible wire that is hard wearing.Clear tube which protects the wire structure and allows for visual inspection. Helps minimise slippage on some surfaces.The large thimble holds the eyes open and allow rotation of connectors for easier rigging.Plastic sleeves over... | STEEL SLING |
|
|
|
PROTEKT HORIZONTAL ADJUSTABLE WEBBING 10M WITH AX050 AND 2 PCS OF AZ060 | Protekt Horizontal Adjustable Webbing - AE 320 -10 M Horizontal anchoring rope (horizontal safety rope) with adjustable length. Included with the device are two AZ 060 steel latches and a transport bag. For use when carrying out work that requires frequent horizontal movement. The AE 320 meets the requirements of EN 795 type B (portable anchor points). The AE 320 device is designed for simultaneous protection of 3 people. Standards EN 795 Class B. | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|
|
|
HONOR READY TO USE BAG | Honor Ready to Use Bag(Accessory of HONORope-T system)Temporary Horizontal Life Line (HLL); rapidly to install system. In many different situations while working at heights a permanent installed HLL is not necessary or too costly. Than a quick and easy to install temporary HLL is ideal. Even more so because several types of fall arrest devices (lanyards, Inertia Reels, Recovery blocks and even descent devices) can be combined with this system. HONORope-T is designed as a temporary up to... | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|
|
|
HONOR TIGHTEN-SPINE, ROPE VICE TENSIONER (RVT) | Honor Spandoorn Line Tensioner - R010.334.015 (Spare Part of HONORope-T system)In various situations, a permanent fall protection system is not desirable, unnecessary or simply too expensive for technical reasons. Then a temporary, quick and easy to install system like the HONORope-T system is ideal. Features: Temporary, quick (within 2 min) installation of a horizontal fall protection system; Approve: max. 25 meter overvoltage (system length) Approve: up to 5 users; Components: Core sheath... | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|
|
|
HONOR HONOROPE-T, TEMPORARY HORIZONTAL LIFELINE SYSTEM, 5 USERS, 25M | Horizontal, temporary system HONOROPE-T®In many different situations while working on height a permanent installed HLL is not necessary or too costly. Than a quick and simply to install temporary HLL is ideal. The HONOROPE-T offers safe move ability to the users in a horizontal plane (25 meters) and, combined with Lanyards, Miniblocs or Fall Arrest Blocks, even up to 3-dimensions. Maximum end loads are very low, only 7,7 kN. HONOROPE-T components are: Special developed 25 meter long, very... | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|
|
|
HONOR TROLLEY HONOROPE-T, 2 EYES, EN12278 | Honor Trolley, 2 Eyes - R010.210.012(Accessory of HONORope-T system)In various situations, a permanent fall protection system is not desirable, unnecessary or simply too costly for technical reasons. Then a temporary, quick and easy to install system like the HONORope-T system is ideal. Features: Temporary, fast (within 2 min) to install horizontal fall protection system; Approval: max. 25 meter (82 feet) span (system length) Approval: up to 5 users; Components: Core line 25 meter (82 feet)... | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|
|
|
HONOR TROLLEY HONOROPE-T, 1 EYE, EN12278 | Honor Trolley, 1 Eye - R010.210.011(Accessory of HONORope-T system)In various situations, a permanent fall protection system is not desirable, unnecessary or simply too costly for technical reasons. Then a temporary, quick and easy to install system like the HONORope-T system is ideal. Features: Temporary, fast (within 2 min) to install horizontal fall protection system; Approval: max. 25 meter (82 feet) span (system length) Approval: up to 5 users; Components: Core line 25 meter (82 feet) with... | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|
|
|
PROTEKT HORIZONTAL ADJUSTABLE WEBBING 20M WITH AX050 AND 2 PCS OF AZ060 | Protekt Horizontal Adjustable Webbing -A 320 - 20 M Horizontal anchoring rope (horizontal safety rope) with adjustable length. Included with the device are two AZ 060 steel latches and a transport bag. For use when carrying out work that requires frequent horizontal movement. The AE 320 meets the requirements of EN 795 type B (portable anchor points). The AE 320 device is designed for simultaneous protection of 3 people. Standards EN 795 Class B. | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|
|
|
WORKSAFE® TEMPORARY HORIZONTAL ADJUSTABLE WEBBING LIFELINE WITH RATCHET TENSIONER, 2 SNAP HOOKS & EN795 TYPE B | WORKSafe® Horizontal Adjustable Webbing Lifeline The WORKSafe® Horizontal Adjustable Webbing is a temporary horizontal lifeline designed for quick installation at worksites. Available in 10m and 20m lengths, it features durable polyester webbing, a ratchet tensioner and a snap hook at each end, while supporting up to 3 workers at the same time. Specifications Brand: WORKSafe® Type: Temporary Horizontal Adjustable Webbing Lifeline Available Lengths: 10m / 20m Webbing Width:... | TEMPORARY HORIZONTAL LIFELINE SYSTEM |
|