You have 0 items in your cart.
By Brands
Safety Sam
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
CLIMBTECH 3/4" TOGGLE LOK ANCHOR RTL1020 | ClimbTech RTL Toggle Anchor Our newest anchor! This versatile, portable concrete/steel anchorage connector, used exclusively for fall protection, can be inserted inside precast concrete and steel flanges. Features: Size: 3/4″. Breaking Strength: 5,000 lbf / 22kN. Compliance: ANSI Z359 & CE-EN 795. Weight: 0.45-lbs. | ANCHORAGE CONNECTOR |
|
|
|
CLIMBTECH BEAM TROLLEY 3"-10" BEAM 5000LB | ClimbTech Beam Trolley A removable and reusable rolling I-beam anchor, easy to place and remove. This anchor is designed to easilyroll along the beam while trailing the worker. Weight: 7.7lbs. Beam Flange Width: 3″ – 10″. Breaking Strength: 5,000 lbf / 22kN. Compliance: ANSI Z359 & CE-EN 795. | ANCHORAGE CONNECTOR |
|
|
|
WORKSAFE® ROOF LANDYARD FOR HORIZONTAL USE CR200 AND CR300 | WORKSafe® Roof Lanyard for Horizontal - AZ800 The AZ 800 Roof Lanyard is a special category of personal equipment against falls from a height, especially intended for roof work where risk of fall over an edge egsist. The product conforms to EN354 standard and additionally was successfully tested for horizontal use and drop over an edge, according to VG11 CNB/P/11.060 sheet. | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT SLIDER OPENABLE (DUO SYSTEM ONLY) | PROTEKT SLIDER OPENABLE (DUO SYSTEM ONLY) Stainless steel, 0.43kg. | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT ALU ANCHOR CLAMP, DIMENSIONS: 440 X 100 X 45MM FOR ONE WORKER | Protekt ALU Anchor Clamp - AT250 The AT 250 catch device is a portable anchor point, adapted to work with a rail with an I-section cross-section. The rail must be permanently attached to the fixed structure. | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT 3 POINT END STRUCTURAL ANCHOR POINT | PROTEKT 3 POINT END STRUCTURAL ANCHOR POINT | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT SCREW CLIP (STAINLESS STEEL) | PROTEKT AC930 Screw Clip When the screw is turned, it acts as a worm drive pulling the threads of the band, causing the band to tighten around the hose (or when screwed the opposite direction, to loosen). Screw clamps are normally used for hoses 1/2 inch diameter and up, with other clamps used for smaller hoses. | ANCHORAGE CONNECTOR |
|
|
|
PROTEKT AT061 ALU ANCHOR BEAM + BAG | Protekt ALU Anchor Beam + Bag - AT061 Light aluminium alloy anchor beam AT 061 is a component of fall protection equipment and can be used as a portable anchor device. The beam can be used in building openings (windows and doors), 300 to 1270mm wide. It is fitted with two fixing plates. | ANCHORAGE CONNECTOR |
|
|
|
CLIMBTECH BEAM CLAMP,VERTICAL, 4"-14", 5K | CLIMBTECH Vertical / Fixed Beam Clamp The VBC014N is a fixed I-beam anchor that is easy to operate and designed to clamp onto a vertical or horizontal I-beam to create a fixed anchor point. Components: Zinc Plated Steel Swivel D-Ring Zinc Plated Steel Support Bar Zinc Plated Steel Flange Hooks Stainless Steel D-Ring Mount | ANCHORAGE CONNECTOR |
|
|
|
MILLER TURBOLITE WITH ALUM KARABINER & ALUM HOOK (MTL-OHW1-07/6FT) | The Miller Turbolite with Aluminium Karabiner & Aluminium Hook (MTL-OHW1-07/6FT). Model: Miller Turbolite with Aluminium Karabiner & Aluminium Hook (MTL-OHW1-07/6FT) Connector Type: Single Steel Carabiner Lifeline Connector: Aluminium Hook Weight: 4.5 lb (2 kg) Maximum Working Capacity: 310 lb (141 kg) Total Capacity: 420 lb (190.5 kg) | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE STEEL CABLE RETRACTOR CR250 HV, 6M, SELF-LOCKING DEVICE (CR250HV0002SI1200600) | The WORKSafe® CR250 HV Steel Cable Retractor offers reliable fall protection for both vertical and horizontal use. This self-locking device is designed for applications requiring significant displacement from the attachment point. Featuring a 6m galvanized steel cable, it provides robust security for users weighing up to 120kg. The device includes a swivel-mounted mechanism within a durable composite casing, and the shock absorber is not required for most tasks. With a static strength of 12... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE® WR100 WEBBING RETRACTOR 6M WITH AZ011 | WORKSafe® WR100 WEBBING RETRACTOR Lightweight webbing retractor High-density thermoplastic enclosure Dimensions: 160 x 70 x 230mm Working length: 6m Weight: 1,700g Includes galvanized steel screw-gate karabiner, aluminum swivel snap hook and fall indicator (opening: 24mm, weight: 220g) Tested and approved to EN360 standards | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE® RETRACTABLE TYPE FALL ARRESTER WITH RESCUE LIFTING DEVICE, CABLE LENGTH : 25M | WORKSafe®; Retractable Type Fall Arrester With Rescue Lifting Device, - CRW300-25 CRW 300 is a combination of a retractable type fall arrester and a rescue lifting device. The device is fitted with rescue lifting device with lifting and descending functions. In order to install the device on a tripod mount an adequate mounting clamp. Connector has fall indicator and thanks to its design no energy absorber is required. Working Load Limit: 140kg. With the ratio used in the mechanism it is... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE WSFCR300 FALL ARREST STEEL CABLE RETRACTOR WITH SWIVEL SNAP HOOK & FALL INDICATOR - 20M/28M | WORKSafe WSFCR300 Steel Cable Retractor The WORKSafe WSFCR300 Steel Cable Retractor is designed for fall arrest applications, featuring a 4mm zinc galvanised steel cable, swivel snap hook and fall indicator. Available with 20m or 28m cable lengths, it supports a maximum user weight of 140kg and is tested and approved to EN 360 standards. Specifications Brand: WORKSafe Model: WSFCR300 Product Codes: 710WSFCR300-20 / 710WSFCR300-28 Category: Fall Arrest Steel Cable Retractor Type: Steel Cable... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE CR250V SELF-RETRACTING LIFELINE WITH GALVANISED STEEL CABLE & 140KG CAPACITY | WORKSafe CR250V Self-Retracting Lifeline The WORKSafe CR250V is a self-locking, self-retracting lifeline designed for vertical fall protection where significant movement from the attachment point is required. It features a galvanised steel cable, swivel-mounted housing, fall indicator snap hook and a maximum tested user weight of 140kg. No additional shock absorber is required. Specifications Brand: WORKSafe Model: CR250V Product Code: WSFCR250V Type: Self-Retracting Lifeline / Self-Locking... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE CR250HV SELF-LOCKING STEEL CABLE RETRACTOR FOR VERTICAL & HORIZONTAL USE, 6M / 11M | WORKSafe CR250HV Self-Locking Steel Cable Retractor The WORKSafe CR250HV / WSFCR250 is a self-locking steel cable retractor designed for both vertical and horizontal operation. It features a galvanised steel cable, swivel system and durable composite casing, and is suitable for work requiring significant movement from the attachment point. No additional shock absorber is required. Specifications Brand: WORKSafe Model: WSFCR250 / CR250HV Type: Steel Cable Retractor Available Lengths: 6m and... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE® ROLEX WEBBING RETRACTOR 2.4M WITH SWIVEL HOOKS, EN360 APPROVED | WORKSafe® Rolex Webbing Retractor 2.4M The WORKSafe® Rolex Webbing Retractor AH220S is a high-quality fall protection device designed for safety and flexibility in a variety of work environments. Featuring 2.4 meters of polyamide webbing with a 45mm width, this retractor includes an energy dissipating element for impact reduction. The swivel scaffold hook (60mm opening) and aluminum swivel snap hook (24mm opening) ensure easy attachment to various anchor points. The energy absorber... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
WORKSAFE WSFAH210 2.25M FALL PROTECTION WEBBING RETRACTOR WITH ENERGY ABSORBER | WORKSafe WSFAH210 Rolex Webbing Retractor The WORKSafe WSFAH210 is a fall protection webbing retractor with a maximum working length of 2.25m, designed with an energy dissipating element, twist-lock karabiner and swivel snap hook. Its 45mm polyamide webbing and integrated energy absorber provide a compact fall arrest solution, tested and approved to EN 360 standards. Specifications Brand: WORKSafe Model: WSFAH210 Product Code: 710WSFAH210 Category: Fall Protection / Webbing Retractor Type:... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
PROTEKT SELF RETRACTING LIFELINE WITH AZ031TI, 20M CABLE WITH FALL INDICATOR | Protekt Self Retracting Lifeline - CR 300-20Retractable type fall arrester CR300 length 20 m with carabiners AZ 002ASI.CR 300 self-locking device with pull-down steel rope.The diameter of the 4 mm cable.The device is designed for work requiring significant displacement in relation to the point of attachment.No need to use a shock absorber.The CR 300 self-locking device is a component of individual fall protection equipment.The device tested for work on flat roofs in conjunction with the AZ 800... | SELF RETRACTING LIFELINE (SRL) |
|
|
|
PROTEKT CR30 STEEL CABLE RETRACTOR (3M) WITH FALL INDICATOR SNAP HOOK AZ031TI | PROTEKT CR30 STEEL CABLE RETRACTOR (3M) WITH FALL INDICATOR SNAP HOOK AZ031TI | SELF RETRACTING LIFELINE (SRL) |
|