You have 0 items in your cart.
By Brands
Safety Products
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
| PROTEKT ROPE 6.3MM DIA, 10M ROPE FOR RUP502 | SPARE PARTS |
|
|||
|
PROTEKT 25M STEEL CABLE FOR TRIPOD WINCH (CABLE ONLY), 6.3MM DIAMETER | Protekt 25M Steel Cable Rescue lifting device RUP502 with pulley, cable length 25 m. RUP 502 is a winch equipped with a clamp for mounting on tripod leg. The winch is equipped with six-strand steel cable with natural fibre kern of 20 and 25 m in length and 6.3 mm in diameter; RUP 502 is a component of rescue equipment. The device, can be lifted from a lower level onto a higher level or vice-versa. The descent distance cannot be more than 2 m.With the ratio used in the mechanism it is possible... | SPARE PARTS |
|
|
|
PROTEKT FRICTION RING | PROTEKT FRICTION RING Friction ring: Rubber ring keeps the socket on the square. Easier to remove the socket. Hence, it's used for most purposes where more than one socket is needed. | SPARE PARTS |
|
|
| PROTEKT U-BAR WITH TWO RINGS AND WIRE | PROTEKT U-BAR WITH TWO RINGS AND WIRE Transportable temporary anchorage device. Tripod in aluminium with either a safety chain or a safety webbing, working height from 130 to 228cm, with four anchorage points | SPARE PARTS |
|
||
|
MSA N95 FILTER COVERS, ADV 200, 2/PK | MSA N95 Filter Covers, ADV 200, 2/PK The MSA Advantage® N95 snap-on prefilter cover feature a low-profile, bayonet-style design for quick mounting. Cartridges lock into placed with just one twist. Reusable—provides lightweight, low-profile performance. Cover fits N95 prefilter, Nos. 4LR66 and 4LR71, sold separately. Filter Cover, PK2. | SPARE PARTS |
|
|
|
MOLDEX PIGGYBACK ADAPTER FOR 7000 SERIES & 9000 RESPIRATORS | Moldex Piggyback Adapter For 7000 Series Half Mask & 9000 Series Full Face Respirators - 7920 Features All Moldex Particulate Filters are NIOSH certified. Can be used with 7000, 7800 and 9000 series respirators. Use the 8910 N95 Filter or the 8970 R95 Filter with the 7020 Pre-Filter Retainer and any Moldex gas/vapor cartridge. The 8970 R95 Filter and the P100 Filter Disks can be used for both oil and non-oil based particulates. P100 Particulate filter disks are lighter than traditional... | SPARE PARTS |
|
|
|
MILLER 12 X RELIEF STEP SAFETY DEVICES | Miller 12 X Relief Step Safety Devices - 9099X/12 The Miller Relief Step is a compact pack encompassing a webbing strap and foot loop for deployment in the event of a sustained fall, and assists in the prevention of suspension trauma. 12 Relief Step Safety Devices. Recommended Industries/Use - Agriculture, Chemical, Construction, Food Services, Forestry, Manufacturing, Mining, Municipal Services, Oil and Gas, Pharmaceutical, Steel and Metals, Transportation, Utilities. Hazards -... | SPARE PARTS |
|
|
|
SCOTT FIXED LENGTH PU HOSE (FH1, FH2, FH21, FH22, FH3, FH31, FH5, FH51) 2026226 | 3M Scott fixed-length PU hose for use with connecting with FH1, FH2, FH21 head tops/face shields and the Scott Safety Duraflow Powered Air respirator. | SPARE PARTS |
|
|
| HONEYWELL HL400 DISPENSER ANTIMICROBIAL KNOB-FRME | HONEYWELL HL400 DISPENSER ANTIMICROBIAL KNOB-FRME The HL400™AM dispensers for earplugs are designed to meet today’s safety needs. The turn knob and catch tray are treated with an antimicrobial additive, making earplug dispensing more hygienic. The antimicrobial additive releases slowly to reduce the bioburden on the turn knob. This way the product remains clean and does not require extra cleaning, thus, driving cost savings. This product does not protect users or others against... | SPARE PARTS |
|
||
|
BLS C-43 WASHABLE BAG FOR HALF MASKS AND FILTERS | BLS C-43 WASHABLE BAG FOR HALF MASKS AND FILTERS Textile bag for half masks, with strap and buckle. | SPARE PARTS |
|
|
|
BLS C-22 FRAME FOR PRESCRIPTION LENSES FOR BLS 5000 SERIES FULL FACE MASKS | BLS C-22 FRAME FOR PRESCRIPTION LENSES FOR BLS 5000 SERIES FULL FACE MASKS Frame for prescription lenses for full face mask 5000 series. | SPARE PARTS |
|
|
|
BILSOM LEIGHTNING HYGIENE KIT (10 PACK/CASE) | Howard Bilsom Leightning Hygiene Kit Features Includes one pair of replacement ear cushions and one pair of foam inserts. Extends performance and lifetime of earmuff. Recommended replacement every 6 months with general use, more frequently with heavy use. Snap-in ear cushions are standard on all Howard Leight earmuffs. Hazards Noise Historical Brand Bilsom, Howard Leight | SPARE PARTS |
|
|
|
CLEANAIR DECONTAMINATION SET FOR 2F (510046) | CLEANAIR DECONTAMINATION SET FOR 2F - CAR51-00-46 Decontamination plugs (set of 3) seal openings on Chemical 2F. Achieves IP68 water ingress standard Allows full immersion in disinfectant e.g. with sodium hypochlorite solution and peroxyacetic solution (Persteril). | SPARE PARTS |
|
|
|
CLEANAIR LIGHT FLEXI HOSE CA40X1/7' - CA40X1/7' - MASK COMPATIBLE, 700060 | CLEANAIR LIGHT FLEXI HOSE CA40X1/7' - CA40X1/7' - MASK COMPATIBLE, 700060 Light flexi hose CA40x1/7' - CA40x1/7' - mask compatible is a product of the CleanAIR brand of the Czech Republic-based company Malina Safety. This brand offers a wide range of respiratory protection solutions based on the principle of filtered air overpressure in the breathing zone. The "Welding" and "Chemical" categories are mainly made up of personal protective equipment, some of... | SPARE PARTS |
|
|
|
CLEANAIR SAFETY HELMET CA-4 PLUS WITH BREATHING SYSTEM LONG HOOD (710400Y) | CLEANAIR® SAFETY HELMENT CA-4 LONG HOOD This safety helmet combines respiratory protection with protection of the head, face and ears (optional). The long hood provides protection down to the shoulders. Lightweight industrial safety helmet with air distribution. The wide panoramic visor with an anti-fog coating enables a good orientation. The helmet fits well thanks to the adjustable headgear and is provided with a sweatband. Hardhat meets EN 397 standard. Long hood protects neck -... | SPARE PARTS |
|
|
|
CLEANAIR LONG HOOD CA-2 LITE (720201) | CLEANAIR LONG HOOD CA-2 LITE Areas of application Suitable for use in the nontoxic dusty environments in the manufacturing industry, wood processing, food industry, mining, agriculture etc. Features Benefits Superior breathing protection Wide visor with antifog coating Individual headgear settings – adjustable perimeter and distance from the visor Pleasant to wear due to the spacy cut and light weight durable material Basic mechanical protection of the eyes Practical reflective... | SPARE PARTS |
|
|
|
CLEANAIR LONG PROTECTIVE HOOD CA-10, CHEMICALLY RESISTANT (721002) | CLEANAIR LONG PROTECTIVE HOOD CA-10, CHEMICALLY RESISTANT Superior breathing protection with high chemical resistance This chemically resistant hood ensures respiratory protection and protection of the head, neck and shoulders in the most demanding chemical environments. In combination with PAPR or airline systems CleanAIR® it reaches the highest level of breathing protection. The hood has increased durability and can be decontaminated because of the light laminated fabric with taped... | SPARE PARTS |
|
|
|
3M 102 UNIVERSAL SPECTACLE KIT (1EA/CSE) | 3M 102 UNIVERSAL SPECTACLE KIT (1EA/CSE) Spectacle Kit for 3M™ Full Facepiece FF-400 and 6000 series Permits wearer to use corrective lenses and to make position adjustment that is most comfortable 1 each per case Easy installation For occupational use only Wear your prescription lenses while using certain 3M™ Full Facepiece Reusable Respirators with the help of 3M™ Universal Spectacle Kit, 102. These spectacle frames attach to 3M full facepieces and can be... | SPARE PARTS |
|
|
|
TECMEN FREFLOW V3 PARTS PAPR BAG PACK | Specifications: Model: Tecmen WHFFV3.C3 FreeFlow Backpack Compatibility: Tecmen V1 & V3 PAPR systems Construction: Heavy-duty, durable materials Ideal for extended wear in industrial environments Applications: Mining, construction, metal fabrication Applications: Construction Mining Industrial Metal fabrication | SPARE PARTS |
|
|
|
SCOTT FIXED LENGTH PU HOSE FOR FM1, FM2, FM3, FM4 – POLYURETHANE HOSE | Scott Fixed Length PU Hose for FM1, FM2, FM3, FM4 – Durable Polyurethane Hose for Air Systems The Scott Fixed Length PU Hose is a high-quality, durable hose designed for use with Scott FM1, FM2, FM3, and FM4 systems. Made from robust polyurethane, this hose offers exceptional flexibility and reliability, ensuring optimal performance in demanding environments. It is compatible with the Proflow, Duraflow, and powered air systems, providing a secure and efficient air supply... | SPARE PARTS |
|