Name	Description	Category
Fluke 90i-610s 1A to 600A AC/DC Current Probe	Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A \| 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V	Automotive Accessories
testo 175 T1 (0572 1751) 1-Channel Temp Logger with Internal NTC Sensor	Features One button operation - Click and “GO” button instantly starts logging and recording. TWO standard interfaces - Mini USB and SD card for easiest direct communication with your PC - no added interface required. Large display w/ one button backlight - For easily viewing data in poorly lit areas. Longer battery life - Designed to conserve energy for data recording without interruption. Up to 3 years battery life. Standard battery (AA) replaceable by user. Larger memory - Collect...	Datalogger
Fluke CIQ-100 CableIQ Qualification Tester	Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters) Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing) Identifies unused switch ports that can be reallocated Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap...	Copper Cable Test Solutions
DKK-TOA HM-30R	Large color graphic LCD display 0.01/0.001 pH display switchable High-performance with the Strong&Float (internal solution concentration checker) pH electrode USB (Host) and LAN equipped Multiple sample measuring capability (turntable connection) Meas. range pH 0.000 - 14.000 0.0 - ±2000.0mV (ORP electrodes sold separately) 0 - 100.0℃	pH meters
Fluke Networks TS42DLX and TS44Pro Telephone Test Sets	Superior high-impedance monitoring Data indication/warning Low & high voltage indication/warning Low current (mA) indication/warning Passive monitor 2-Way hands-free speakerphone Low battery warning Mute indication Polarity indication Tone & pulse dialing (Optional) 1-Way amplified speakerphone mode Amplified speaker Last number redial Over voltage protection Over current protection Mute PBX pause button Audible ringer Speed dialing Volume control...	Telephone Test Sets / Butt Sets
BW Gas Alert Clip Extreme 24 Month Gas Detectors	The BW GasAlertClipExtreme is portable single gas detector designed for users with fixed-duration projects or those who need a go/no-go monitor that's lightweight, compact and easy-to-use. The GA24XT is entirely maintenance free for 24 months GasAlertClip Extreme - Waterproof 2-Year Disposable Gas Detector with Event Logging. Simply press the START/TEST button and the GasAlertClip Extreme is ready to use, providing two years of continuous, maintenance-free operation from the day of...	Single gas detectors
Hioki Magnetic Field- Hitester FT3470-52	3-Axis Magnetic Field Testing According to IEC 62110/IEEE 644, IEC 62233 and ICNIRP 2010 Guidelines Hioki magnetic field testers are designed to measure magnetic flux density and level of magnetic field exposure, and can be used to assess conformance to ICNIRP 2010 and IEC/EN62233 and in research on magnetic field exposure. The FT3470-52 measures magnetic flux density and magnetic field exposure generated by products manufactured at a customer site or produced by devices in a customer...	Environmental \| Magnetic Field \| Temperature & Humidity
Sew 4235 ER	● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m. ...	4 Wire Earth Resistance & Resistivity Testers
DKK-TOA OC-711 / OC-950	Immersion/Drop-In Type DO Holder OC-711 / OC-950 Lightweight PVC holder; length of immersion type holder: 0.3 - 3.5 m, length of stainless steel protection pipe for drop-in type holder: 2 - 6 m Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste)	Immersion/Drop-in Type DO Holder/Detector with Water Jet Cleaner
Sew 2713 PU	Designed to proof: -Phasing sticks. -High voltage detectors (contact type only, not to be used with non contact proximity detectors.) -High voltage and voltage testers.● Battery operated.● Led indicates when power is “ON”.● Small and hand-held.● Quick connection with normal 4mm test leads.	H.V. Proving Unit (DCV)
Sew ST-2000 A	Principle : Moving ● Accuracy : ± 0.5% of F.S. ● Scale Length : Approx. 135mm(5-3/8”) ● Weight : Approx. 1.7kg ● Dimension :196(L) x 170(W) x 87(D)mm ● Case Material : Bakelite with glass window	Portable Instrument
DKK-TOA MBM-100A	Panel Type Electromagnetic Conductivity Analyzer MBM-100A Compact DIN 96 size Accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) 2-point contact signal, 4 - 20mA output (RS-232 optional) Meas. range Minimum : 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm	Panel Type Electromagnetic Conductivity/Concentration Analyzer
BW Sensepoint XCD	The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs. Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous...	Fix type gas detector
Sew 6400 DM	FEATURES ● 4000 counts LCD with a maximum display of 3999.● Angled display design helps the user to identify the reading of value easier.● Auto ranging designed.● Range change function.● Continuity check.● Diode measurement.● Data hold function.● Low battery indication.● Over range indication.● Fuse protection.● Special hook design used to hang the meter for ease of use. ...	Digital Multimeters
DKK-TOA WBM-100	Compact DIN 96 size Temperature compensation computed by a microcomputer Cell constant value adjustable depends on customers' need Water temperature displayable Power supply: AC90 - 264V, 50/60Hz Meas. range Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm	Panel Type Conductivity Analyzer
DKK-TOA HBM-100A / HBM-102A	Compact DIN 96 size design Auto-detection of electrode deterioration Automated self-diagnosis of fault (burn-out output) Alterable alarm contact signal (4-point) 2-channel output (RS-232 optional) Meas. range: HBM-100A: pH； -1 - 15 HBM-102A: ORP； -2000 - +2000 mV	Panel Mount pH/ORP Analyaer
FLIR i7 Infrared Camera	140 x 140 px Thermal Camera THE FLIR i7 IS IDEAL FOR ELECTRICAL INSPECTIONS, ENERGY AUDITS, WEATHERISATION JOBS AND BUILDING INSPECTIONS Most FLIR products on this site are advertised at the list price. Please use the 'Best Quote' link on the right for our discounted price. FLIR Part No: 60101-0301	FLIR i-Series Thermal Imagers
Kyoritsu 9089	Applicablemodels 3021 3022 3023 3321A • Carrying case • 205 (L) × 165 (W) × 80 (D)mm	Case
Sew 6237 DLRO	FEATURES ● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™...	Low Resistance Ohm Meter
Hioki Power Source Unit SM7860-07, SM7860-27	32-channel Power Source Unit for the SM7810 Super Megohm Meter to Improve MLCC Testing Efficiency The SM7860 series allows for setting the dual-line output voltage on 8 channels or 16 channels, and enables up to 32-channel of output. The Hioki SM7860-07/-27 is a 32-channel, 10V discharge power source for the Hioki SM7810 Super Megohm Meter, providing positive and negative polarities required for MLCC test lines. The Power Source Unit SM7860 Series are produced to order. Select a power source...	Super Megaohm \| Pico-ammeter \| High Resistance Testers