DKK-TOA

  • Filters
cld-7m

 Measures chloride demand of water and estimates chlorine injection level; best suited for feed forward control Meas. range From 0 - 5 mg/L...

clf-1610

Measures free residual chlorine of clean water continuously with the reagentless polarographic method RS-485 equipped as standard specification; compatible...

a5-a6-series

Hermetically sealed 2-electrode type detector featured with excellent heat-proofing and pressure tightness Pipeline-insertion/immersion/flow-through/throw-in/leadless,...

aa-1-for-standard-aa-2-for-ultrapure-water

Single-function (no indication) conductivity analyzer for field installation Easy installation for the one-unit amplifier and detector Output: 4 - 20mADC Power...

abt-511

Automatic Burette ABT-511 Precising dispensing system (stable quantitation and speed) Titration burette (manual titration) supported GLP...

af-100
Category: ATP Analyzer

Enables bacteria and cell measurements in 50 sec. Highly sensitive measurement at 1 - 1000 cells/mL level Enables direct measurement of membrane...

alf-1600

Continuous measurement of alkalinity data in water purification process by coulometric titration method Requires only 1/4 reagent volume of existing...

aqm-100a

Resistivity Analyzer for Ultra-Pure Water AQM-100A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines  Two...

aqm-210a

Panel Type Resistivity Analyzer AQM-210A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines  Two...

ar4-ar5-series

Compact 2-electrode type (titanium) detector designed for ultrapure water Pipeline insertion type, leadless type Two types of cell constants available:...

aut-701.1

Dual system allows for 2-channel simultaneous titration Strong&Float high performance electrodes USB(Host) and LAN equipped as standard specification Validation...

bhc-7c

Immersion Type pH/ORP Detector with Brush Cleaner BHC-7C Immersion type pH/ORP electrode holder with cleaning brush (BHC-7C) The swing movements...

bmr-24

Compact and lightweight model in accordance with DIN standard DC 24V power supply designed for 4-point alarm and 2-wire transmitters Often used as a receiver...

bpm-2000

Designed for oil refinery  Automatic fractional distillate analyzer of batch distillation type enables distillation test of petroleum products...

bsc

A complete sampling system composed with cooler, pressure reducer, valves, flowmeter and thermostat chambers Enables sampling for analysis from the boiler Consistent...

cd-36d-38d

Measures free residual chlorine of chlorinated samples from purification/food processing/semiconductor plants and pool without reagent Continuous...

cfpp

Designed for oil refinery Continuous measurement of plugging pour point which is used as indication of light oil and intermediate fraction of fuel...

cgp-31

Enables measurement of CO2 in both liquid phase and gas phase Wide measurement range(0.1 - 100%) Membrane electrode allows for reliable measurement Power-saving...

cgs-12

Calibration Gas Generator CGS-12   Calibrator for SO2/NOX/CO analyzers Built-in zero gas generator enables suction of ambient air &...

clbm-50

Residual Chlorine Analyzer CLBM-50   Ultracompact DIN 48 size Reagenless model Auto-cleaning by polishing beads and micro-vibrating electrode Power...

clf-120

Reagentless Residual Chlorine Analyzer CLF-120   Measures total residual chlorine of drainage water without reagent Continuous measurement...

clf-1600

Measures residual chlorine (total or free) happened in the water chlorination process Continuously measurement with polarographic method 1/5 reagent...

cm-20j

 Easy-to-read LCD display  AC/DC 2-way power supply  SI unit display supported (S/m and S/cm)  Cost-effective designed in a compact...

cm-25r

 Low-cost basic model  Easy-to-read large customized LCD display  External printer connectable  Data storage up to 300 points  Compliant...

cm-30r

JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement  Built-in pure water temperature compensation  USB...

cm-31p-for-standard-use-cm-31p-w-for-pure-water

Display of salinity (NaCl) is available (CM-31P) Highly accurate measurement in pure water attainable with the pure water temperature compensation function...

cnbm-100a-panel-type

Simplified Cyanide Ion Monitor CNBM-100A(Panel Type) Compact DIN 96 size unit One-touch calibration done with standard solution Auto-detection...

cnbm-160-field-installation-type

Simplified Cyanide Ion Monitor CNBM-160(Field Installation Type)   Outdoor field installation model One-touch calibration done with standard...

cnms-4

Cyanide Ion Monitor CNMS-4     Simple measurement with just an ion electrode Enables continuous cyanide ion measurements in discharged...

cod-203a

Automated COD Analyzer COD-203A   Measures COD of river water, lake water and effluent in accordance with JIS K 0806 instruction "Automatic...

Additional information