Name	Description	Category
Fluke TPS CLAMP 200 A / 20 A Clip-on Current Transformer	Measuring Range selectable per software:0.2 A to 20 A 2 A to 200 A Peak current for sinusoidal currents74 A 300 A Intrinsic error 0.5% Frequency Range 40 Hz to 10 kHz Operating Voltage 300 V CAT IV Phase Error 0.5 ° Jaw Opening < 15 mm diameter or 15 x 17 mm bus bars Errors in % of measuring range at 23 °C ± 2 K; 74 °F ± 2 K, for 48 to 65 Hz Phase angle error at nominal current Imax maximum current without time limit (for ac and dc shunts)	Current Clamps
Fluke TPS CLAMP 50 A / 5 A Clip-on Current Transformer	Measuring Range selectable per software 1 A to 100 A 5 A to 500 A Peak current for sinusoidal currents 240 A 1350 A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 300 V CAT IV Phase Error 0.5 ° Jaw Opening 45 cm length 2 m cable Errors in % of measuring range at 23 °C ± 2 K; 74 °F ± 2 K, for 48 to 65 Hz Phase angle error at nominal current Imax maximum current without time limit (for ac and dc shunts)	Current Clamp DMM Accys
Fluke 700LTP-1 Low-pressure Test Pump	Pump can be easily cleaned without disassembly. Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test Slim design, easy to carry and use Includes: (2) adapters to convert the reference and UUT port hose fitting to 1/4" BSP female Adapter to convert the reference port hose...	Pressure
Fluke AC283 Pincer Clips	One pair (red, black) of nickel plated pincers open to 5 mm 11.4 cm flexible insulated shaft Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed One year warranty	Test Leads, Probes, Clips
Kyoritsu 7196A	Applicablemodel 6016 • Test leads with remote control switch • 1,550mm	Test Leads
Temp101A Data Logger	The Temp101A is one of MadgeTech’s newest data loggers. It is part of a new series of low cost, state-of-the-art data loggers. MadgeTech has taken the lead in offering the most advanced, low cost, battery powered data loggers in the world today. The Temp101A offers a 10 year battery life, a multiple start/stop function, ultra-high speed download capability, 1 million reading storage capacity, optional memory wrap, battery life indicator, optional password protection, programmable high-low...	Temperature
Fluke H80M Protective Holster with Magnetic Hanging Strap	Set Includes: Yellow protective holster for all 80 series DMM's (new as well as old) General purpose hanger Hook and loop straps Hanging magnet	Cases and Holsters
Megger BD-59090 MOM2 MicroOhmmeter	Up to 220 A Battery powered Lightweight – 1 kg Safe test – DualGround Auto range: 1 μΩ to 1000 mΩ Bluetooth PC communication Complies with IEEE and IEC standards Easy to use – Attach the Kelvin Clamps and press TEST button. Active-duty and rugged design. All weather, all environment, all industry usage. Truly handheld Testing with both sides grounded	Megger
Fluke TPS CLAMP 50 A / 5 A Clip-on Current Transformer	Measuring Range selectable per software 1 A to 100 A 5 A to 500 A Peak current for sinusoidal currents 240 A 1350 A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 300 V CAT IV Phase Error 0.5 ° Jaw Opening 45 cm length 2 m cable Errors in % of measuring range at 23 °C ± 2 K; 74 °F ± 2 K, for 48 to 65 Hz Phase angle error at nominal current Imax maximum current without time limit (for ac and dc shunts)	Current Clamps
Fluke TPS FLEX 18-TF 100A/500A Thin Flex Flexible Current Probe with 18-inch Cable For the Fluke 1760 Power Recorder	Measuring Range selectable per software: 1A to 100A 5A to 500A Peak current for sinusoidal currents: 240A 1350A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 300 V CAT IV Phase Error 0.5° Jaw Opening 45 cm length 2 m cable	Current Clamp DMM Accys
Fluke 700PRV-1 Pressure Relief Valve Kit	Adjustable from 725 to 5800 PSI (50 to 200 bar) Preset at 2,900 psi/200 bar) Repeatability to 10% of nominal setting. Installs directly into the 700HTP-1 pump	Pressure
Fluke AC285 Aligator Clips	One pair (red, black) of large alligator clips with nickel-plated steel jaws Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt Recommended for use with TL222 and TL224 test leads CAT IV 600 V; CAT III 1000 V, 10 A rating One year warranty	Test Leads, Probes, Clips
Kyoritsu 7197	Applicablemodels 8325F * Cannot be used for MODLE 8309 of new type. The difference between the new type and the old type is as per the following diagram. old type new type • Small Clips adaptor • 650mm • Adaptor to convert the crocodile clips of the voltage sensor (8309)...	Test Leads
TempRetriever Data Logger	The TempRetriever is a low cost, reusable temperature data logger which allows for a myriad of applications. The device excels in dry applications such as shipping, museums, R&D, warehouses and HVAC. It boasts an accuracy of ±0.5ºC and a resolution of 0.1ºC. The TempRetriever can store up to 16,383 readings in its non-volatile memory and, coupled with up to a one year battery life and LED alarm indication makes this the perfect temperature data logger when keeping costs down is...	Temperature
Fluke TPAK ToolPak, Meter Hanging Kit	Kit includes: 9 inch hook and loop strap, universal hanger clip, hook hanger for non magnetic surfaces and a strong magnet. Solves almost any hanging and positioning problem you may face. The universal hanger allows you to hang your meter on nails, hooks and many other objects. Compatible with many Fluke instruments. One year warranty.	Cases and Holsters
Megger BD-59092 MOM2 MicroOhmmeter	Up to 220 A Battery powered Lightweight – 1 kg Safe test – DualGround Auto range: 1 μΩ to 1000 mΩ Bluetooth PC communication Complies with IEEE and IEC standards Easy to use – Attach the Kelvin Clamps and press TEST button. Active-duty and rugged design. All weather, all environment, all industry usage. Truly handheld Testing with both sides grounded	Megger
Fluke TPS FLEX 18-TF 100A/500A Thin Flex Flexible Current Probe with 18-inch Cable For the Fluke 1760 Power Recorder	Measuring Range selectable per software: 1A to 100A 5A to 500A Peak current for sinusoidal currents: 240A 1350A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 300 V CAT IV Phase Error 0.5° Jaw Opening 45 cm length 2 m cable	Current Clamps
Fluke TPS FLEX 24-TF 200A/1000A Thin Flex Flexible Current Probe with 24-inch Cable For the Fluke 1760 Power Recorder	Measuring Range selectable per software: 2A to 200A 10A to 1000A Peak current for sinusoidal currents: 480A 2700A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 600 V CAT IV Phase Error 0.5° Jaw Opening 45 cm length 2 m cable	Current Clamp DMM Accys
Fluke 700PTP-1 Pneumatic Test Pump	Pump can be easily cleaned without disassembly The vernier can be used as a stand-alone low pressure calibration source Two pressure ports allowing simultaneous connection ¼ -NPT female fitting for the reference gauge or pressure module ¼” NPT female fitting for the unit under test Adjustable stroke length can be set to limit the pressure per stroke Includes 1/4 in NPT male to 1/4 in BSP female 1 meter of hose (2) 1/8 in NPT male quick connects 1/8 NPT female to 1/4 in...	Pressure
Fluke AC285-FTP Alligator Clips and Adaptors for FTP-1 and FTPL-1	Alligator Clips and Adaptors For FTP-1 and FTPL-1 Fused Test Probes	Test Leads, Probes, Clips