|
24 Gauge Teflon Insulated Thermocouple
|
|
24 gauge, teflon insulated, thermocouple with mini plug and welded tip. Available in type J, K, T, and E, with a 36" or 72" cable. |
Probes
|
|
|
304 SS 3/16" dia. Thermocouple Probe
|
|
304 SS 3/16" dia. Available in types J, K and T with a 6" or 12" sheath.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C |
Probes
|
|
|
3B5700
|
|
150°C ½ AA High Temperature Battery |
Data Logger Batteries
|
|
|
Anemometer-Wind Speed sensor for Data Logging
|
|
Wind speed sensor for use with the RFPulse2000A or Pulse101A data loggers. The anemometer can be purchased stand alone or with four different cable length options. The Wind101A is also available as an entire system including the Pulse101A Data Logger, Weather Proof Enclosure, 3-Cup Anemometer, and IFC200 Software and Interface Cable Package. |
Weather
|
|
|
BTIF1000 Blutooth Data Logger Interface
|
|
The BTIF1000* is a data logger accessory which adds Bluetooth® wireless capabilities to the PRTemp1000, PRTrans1000, Temp1000, RHTemp1000, Temp1000P, Temp1000S and Temp1000FP data loggers. The BTIF1000 is designed to replace the IFC110 or IFC200 with a high-speed secure wireless link. This enables wireless in-the-field downloading using MadgeTechs new Pocket PC software.
It is fully Bluetooth® qualified and has a modular FCC approval (contains FCC IDQOQWT12). The BTIF1000 is equipped with... |
Interface Cables
|
|
|
BTIF1000 Blutooth Data Logger Interface
|
|
The BTIF1000* is a data logger accessory which adds Bluetooth® wireless capabilities to the PRTemp1000, PRTrans1000, Temp1000, RHTemp1000, Temp1000P, Temp1000S and Temp1000FP data loggers. The BTIF1000 is designed to replace the IFC110 or IFC200 with a high-speed secure wireless link. This enables wireless in-the-field downloading using MadgeTechs new Pocket PC software.
It is fully Bluetooth® qualified and has a modular FCC approval (contains FCC IDQOQWT12). The BTIF1000 is equipped with... |
Wireless
|
|
|
Cable2070
|
|
CO2 monitor to data logger interface cable To connect 7001-C02 monitor to MadgeTech Voltage data loggers, this cable is required. |
Interface Cables
|
|
|
CR2032
|
|
Coin cell for In-Transit data loggers (-20 to+70°C operating environment) |
Data Logger Batteries
|
|
|
CT-800
|
|
Solid core current switch, monitors 1-250Amps, sensor trips at 1Amp. Switch can be used for both AC and DC circuits. |
Current Switches/Transducers
|
|
|
CT-805
|
|
Split Core current switch, monitors 1.5-250Amps, sensor trips at 1.5Amps. Switch can be used for both AC and DC circuits. |
Current Switches/Transducers
|
|
|
CT-815
|
|
Split core current switch, monitors 1.5-150Amps. Adjustable set point and status LED's. |
Current Switches/Transducers
|
|
|
CT-H10F
|
|
Split core current switch, monitors 3.5-100Amps, adjustable set point between 3.5-100Amps, auto calibration, and status LED's. |
Current Switches/Transducers
|
|
|
CT-H600
|
|
Split core current relay switch, monitors 0.15 to 200Amps, fixed setpoints at 0.15Amps max, no status LED's. |
Current Switches/Transducers
|
|
|
CT-H608
|
|
Split core current relay switch, monitors 1.25-50Amps, adjustable set point between 1.25-50Amps, status LED's. |
Current Switches/Transducers
|
|
|
EC-5
|
|
Soil moisture probe, 0~100% VMC, 2.1" length with 16' cable |
Probes
|
|
|
ER14250
|
|
3.6 Volt, Lithium battery. |
Data Logger Batteries
|
|
|
ER1425S
|
|
150°C 3.6V Lithium Battery, ½ AA Axial Leads |
Data Logger Batteries
|
|
|
ER1425S-HT
|
|
150°C 3.6V Lithium Battery, ½ AA Pressure Contact |
Data Logger Batteries
|
|
|
Glycol Bottle with Thermocouple Probe Assembly
|
|
30ml, 60ml and 250ml Glycol Bottles with Thermocouple Probe Assembly |
Probes
|
|
|
HiTemp140-O-Ring
|
|
One Set of Replacement O-Rings for the HiTemp140. |
O-Rings
|
|