You have 0 items in your cart.
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK GHT-113 | Features: * Housing made of unbreakable plastic* Operation voltage 10kVDC/8kVAC max.* Connecting via highly flexible safety cable* Power supply line approx. 2m* Wear-resistant tungsten test probe tip* Teflon sleeve for resistance to burning | Test Leads / Cables / Probes |
|
|
|
GAS DNA Audio-visual display Gas Detector DA-91 Series | DA-91 series detects leakage of various toxic or combustible gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. | Gas Detector |
|
|
|
GW INSTEK GRA-404 | Features *19", 4U Rack Mounting* For : GSP-830/827 | LCR Fixtures |
|
|
|
GW INSTEK SFG-830/830G | Features: *30MHz Direct Digital Synthesizer(DDS)technique *20mHz Frequency Resolution *±10ppm Frequency Accuracy *12 Bit, 5M Sample/S Arbitrary Waveforms *Internally Synthesized FM, AM and Phase Modulation (PSK) *Linear and Log Sweeps *Arbitrary Modulation *Standard Interface: RS-232C*GPIB Interface (SFG-830G) | Discontinued Products |
|
|
|
GW INSTEK GPD-Series | Features: 2/3/4 Independent Isolated Output4 LED Display Sets: 3 digits after decimal point Minimum Resolution : 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)100mV/10mA(GPD-3303D)Digital panel control(rotary encoder Switch, rubber key with indicator) User-friendly operation, coarse/fine volume control 4 Sets Save/Recall Key-Lock Output on/off Tracking Series and Parallel mode Smart cooling fan achieving low noise USB Standard InterfacePC Software & USB Driver Labview driver | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK GFC-8010H | Features: ※ 10Hz ~ 120MHz Range ※ 8 Digits Display (0.3"LED) ※ 15mV rms High Sensitivity ※ 5PPM High Stability Time Base ※ Frequency and Period Measurement ※ Low Pass Filter Function ※ Over-Flow Indicatot | Other Application Instruments |
|
|
|
GW INSTEK GSC-001 | Features * For : GSP-830/827 | Cases / Bags / Racks |
|
|
|
GW INSTEK GKT-002 | Features: * For CATV Application* Including ADP-001, ADP-101 *2, GTL-304, GSC-* For : GSP-Series | Special Applications |
|
|
|
GRA003-GL900 Multifunction logger (BNC) | An easy-to-use upright device enabling isolated 8-channel multifunction input, the GL900 is capable of performing high-speed simultaneous measurements of voltage, temperature, and various other phenomena. +/-20 mV to +/-500 V Thermocouples: K, J, E, T, R, S, B, N, W 0 to 100% (the B-530 option is required) 4 channels Count, Inst., Rpm 4 channels ‡ Select either Pulse or Logic | Datalogger/Recorders |
|
|
|
GAS DNA 2IGA -100 Two color Non-Contact Fixed Pyrometer | 2IGA-100 two color(InGaAs/InGaAs) non-contact infrared thermometer measures the infrared wavelength emitted from the target and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from 400 ℃ to maximum 1200℃ in the distance of 80:1 D:S (Distance to Spot). Emissivity is 0.10 ~ 0.99 adjustable. Two built-in laser pointers can aim at the target. | Fixed Infrared thermometer |
|
|
|
GW INSTEK GCM-302 / GCM-303 | Features: ※ Auto Range ※ Auto Power Off ※ Max Hold ※ True RMS Measurement (GCM-303)※ 600A/600V Max Input ※ Mini Size ※ High Accuracy ※ MAX Clamp Size: 30mm | Digital Meters |
|
|
|
GW INSTEK GHT-205 | Features: * Suitable for : GPT-9900/9800 Series, GPT/GPI-700A Series, GPT/GPI-800 Series | Test Leads / Cables / Probes |
|
|
|
GAS DNA Wireless Indoor Air Quality Monitor IAQ-700 | IAQ-700 is a high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust. Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee. After install indoor Watch (software), it enable to collect data at a long distance. Relay Contact make it possible to interwork with a ventilating system. It has been installed to measure Air quality of indoor or underground spaces like Factories, schools,... | Gas Detector |
|
|
|
GW INSTEK LCR-814 (Replaced by LCR-914) | Features: ※ 3 LCR Measurement Functions ※ 1% Basic Accuracy ※ Test Frequency 120Hz/1kHz and Equivalent Circuit depends on selected Measuring Function & Range ※ High Resolution: 0.1uH, 0.1pF and 1mΩ ※ Dissipation Factor Measurement ※ Zero Adjustment ※ Optional Accessory: TL-06 for SMD Type Component | Discontinued Products |
|
|
|
GW INSTEK GPM-8212 | Features: ※ Simultaneous Display of W, A, V ( PF or Hz ) ※ True RMS V, A, W ※ Auto Calibration Via Computer ※ Max. / Min. / Hold Function ※ High Immunity to External Noise ※ CT Ratio (1 ~ 9999) ※ PT Ratio (1 ~ 9999) | Other Application Instruments |
|
|
|
GW INSTEK GSC-005 | Features * For : GDS-2000 Series, GDS-800 Series | Cases / Bags / Racks |
|
|
|
GW INSTEK GKT-003 | Features: * For RLB-001 Application* Including GAK-001, GAK-002, GTL-302, GSC-004* For : GSP-Series Description: For GSP-810/827/830 | Special Applications |
|
|
|
GAS DNA IR-Compact Non-Contact subminiature Fixed Infrared Thermometer | IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA) and RS-485 communication signal output. It can measure from -60℃ to maximum 350℃ in the distance of 8:1 D:S (Distance to Spot) Emissivity is 0.10 ~ 0.99 adjustable. IR-Compact can monitor the temperature in real time in site through its infrared sensor part and signal processing module. | Fixed Infrared thermometer |
|
|
|
GW INSTEK GTL-101 | Features: * For : GOS-310/620FG,GVT/SFG/GFG/GFC-Series | Test Leads / Cables / Probes |
|
|
|
GON103E-PP201V2 OYSTER PORTABLE PH METER WITH 1M CABLE PH PROBE,CASE | Microprocessor based with splash proof housing. Large LCD built into adjustable "flip-up" cover. Simultaneous display pH and Temperature. Rugged design for handheld or bench top use, neckstrap for "hands-free" operation. Automatic or manual temperature compensation. °C/°F switchable Simple to calibrate by one keyboard for 5 points buffer, calibration value can be adjusted as needed. Indicate percentage of slope (PTS) after calibration. Low battery and consumption indicator. Auto shut... | pH Meters |
|