|
DKK-TOA ODL-1610A
|
|
Oil Film Detector (Long-Distance Model) ODL-1610A
Enables oil film detection even if the surface of sample is 10m away from the detecting cell
Ideal for difficult conditions such as turbulent water and places where is difficult to setup near-water detectors
Contact-free and easy maintenance
Detectable range
0.3 - 10 m
|
Oil Film Detector
|
|
|
DKK-TOA MM-60R
|
|
Multi-Function Water Quality Meter MM-60R
2-Channel model with automatic sensor identification
Allows for connections of pH/ORP/ion/conductivity/dissolved O2 sensors to either channel
0.01/0.001 pH display switchable
Large color graphic LCD display
JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement
USB (Host) and LAN equipped as standard specification
External printer connectable
Multiple... |
pH meters
|
|
|
DKK-TOA HBM-165H(2-wire)
|
|
pH / ORP Transmitter with HART Interface HBM-165H(2-wire)
HART communication protocol interface with a 2-wire, 24 VDC circuit
Available for both pH and ORP measurements
Diecast aluminum enclosure, digital display and a wide range of other useful features
One-touch auto calibration
Self-diagnostic function
Meas. range
-1.00 - 15.00 ORP -2000 - 2000 mV
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA WBM-165H (2-wire)
|
|
Conductivity Transmitter with HART Interface WBM-165H (2-wire)
HART communication protocol interface with a 2-wire, 24 VDC circuit
Aluminum diecast enclosure, digital display and a wide range of other useful features
One-touch auto calibration
Self-diagnostic function
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm
|
Transmitter for Industrial Conductivity Analyzer
|
|
|
DKK-TOA MBM-160(4-wire)
|
|
Electromagnetic Conductivity Transmitter MBM-160(4-wire)
Electromagnetic conductivity analyzer for field installation in a compact aluminum diecast enclosure
Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali)
2-point contact signal, 2-channel output including temperature (RS-232 optional)
Power source: 90 - 264VAC, 50/60Hz
Meas. range
Minimum: 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm |
Transmitter for Electromagnetic Conductivity Analyzer
|
|
|
DKK-TOA MM-60R
|
|
Multi-Function Water Quality Meter MM-60R
2-Channel model with automatic sensor identification
Allows for connections of pH/ORP/ion/conductivity/dissolved O2 sensors to either channel
0.01/0.001 pH display switchable
Large color graphic LCD display
JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement
USB (Host) and LAN equipped as standard specification
External printer... |
Conductivity Meter
|
|
|
DKK-TOA WBM-121A / AK Cell
|
|
Sanitary Type Conductivity Analyzer/Detector WBM-121A / AK Cell
Compact DIN 96 size
Designed for sanitary conductivity analyzer for the food industry
Applied in foodstuff plants and installed in pipes and tanks. Best suited for CIP (stationary cleaning) management, debubbling agent control and liquid level management
Meas. range
0 - 300/3000 μS/cm (at 25 degrees C) 0 - 20/200 mS/cm (at 25 degrees C)
|
Panel Type Conductivity Analyzer
|
|
|
DKK-TOA OBM-100H
|
|
Panel Type Low-Concentration DO Transmitter OBM-100H
Panel type low-concentration DO analyzer in a compact DIN 96 size
2-point regulated, 4 - 20mA, RS-232 output
One-touch calibration and various self-diagnostic functions
Power supply: 90~264VAC, 50/60Hz
Meas. range
Minimum : 0 - 20 μg/L Maximum: 0 - 1000 μg/L
|
Transmitter for Industrial Low-Concentration DO Analyzer
|
|
|
DKK-TOA CLF-120
|
|
Reagentless Residual Chlorine Analyzer CLF-120
Measures total residual chlorine of drainage water without reagent
Continuous measurement by polarographic method
Meas. range
0 - 0.5/1.0, 0 - 1/2, 0 - 2/3 mg/L (ppm)
|
Reagentless Free Chlorine Analyzer
|
|
|
DKK-TOA ABT-511
|
|
Automatic Burette ABT-511
Precising dispensing system (stable quantitation and speed)
Titration burette (manual titration) supported
GLP compliance
Sampling mode loaded(measure/dilution)
RS-232 equipped as standard specification
|
Automatic Titrator
|
|
|
DKK-TOA CNBM-100A(Panel Type)
|
|
Simplified Cyanide Ion Monitor CNBM-100A(Panel Type)
Compact DIN 96 size unit
One-touch calibration done with standard solution
Auto-detection of electrode deterioration
Automatic detection of electrode error during the measurement
Meas. range
0.00 - 9.99 mg/L |
Simplified Cyanide Ion Analyzer
|
|
|
DKK-TOA TUI-100
|
|
Turbidity Meter with Integrating Sphere TUI-100
Integrating sphere system employed for lab turbidity measurements
Continuous measurement of turbidity in tap water, river water, industrial water, etc.
Accurate results for minimized influence of color
Meas. range
0 - 0.5/5 to 0 - 100/1000 Cell length: 50mm or 10mm (selectable) (mg/L, ppm, FTU, NTU)
|
Turbidity Analyzer
|
|
|
DKK-TOA FBM-100A(Panel Type)
|
|
Simplified Fluoride Ion Monitor FBM-100A(Panel Type)
Compact DIN 96 size unit
Quick and continuous detection of free fluoride ion concentration
Monitors the effluent treatment processes and final effluent from semiconductor factories, etc.
Meas. range
0 - 99.9/999/9990 mg/L
|
Simplified Fluoride Ion Monitor
|
|
|
DKK-TOA JHC-7C/JHC-8C
|
|
Immersion Type Detector with Water Jet Cleaner JHC-7C/JHC-8C
Detectors composed of holder and water-jet cleaner: Immersion type(JHC-7C) and flow-through type(JHC-8C)
By spraying water onto the tip of electrode, the water pressure washes fouling away
One-touch detachable holder and easy maintenance
Simple installation with a sensor, timer&electromagnetic valve integrated unit
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA OF-1600
|
|
Oil film is detected by measuring differences of the amount of LED reflectance of oil and water
Small and lightweight design
Contact-free and easy maintenance
Detectable range
About 0.5 m
|
Oil Film Detector
|
|
|
DKK-TOA HM-20J
|
|
Easy-to-read LCD display
AC/DC 2-way power supply
ORP measurable
mV shift function
Cost-effective designed in a compact size
Meas. range
pH 0.00 - 14.00 ORP 0 - ±1999 mV (electrode sold separately) |
pH meters
|
|
|
DKK-TOA HBM-160/HBM-162(4-wire)
|
|
Industrial pH/ORP Transmitter HBM-160/HBM-162(4-wire)
Multi-function pH/ORP analyzer for field installation in a compact aluminum diecast enclosure
One-touch calibration and various self-diagnostic functions
2-point contact signal and 2-channel output including temperature (RS-232 optional)
Power supply: AC90~264V, 50/60Hz
Meas. range
pH meter (HBM-160) : pH -1 - 15 ORP meter (HBM-162) : ORP -2000 - +2000mV
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA MBM-162 (4-wire)
|
|
Electromagnetic Concentration Transmitter MBM-162 (4-wire)
Electromagnetic concentration analyzer for field installation in a compact aluminum diecast enclosure
Conductivity of NaCl, HCl, H2SO4, etc. are measured and converted to concentration (%) data automatically
2-point contact signal, 2-channel output including temperature (RS-232 optional)
Examples of measurement ranges
NaCl: 0~10% HCl: 30~40% H2SO4: 93~99.5% NaOH: 0~15%
|
Transmitter for Electromagnetic Conductivity Analyzer
|
|
|
DKK-TOA CM-20J
|
|
Easy-to-read LCD display
AC/DC 2-way power supply
SI unit display supported (S/m and S/cm)
Cost-effective designed in a compact size
Meas. range
0 - 20.00 S/m |
Conductivity Meter
|
|
|
DKK-TOA OC-64
|
|
Low-Concentration DO Detector for Pure Water OC-64
Suitable for low-concentration DO measurement (pure water in semiconductor factories, boiler water in power plants)
Micro-flow (100mL/min) with special flow cell
Electrode: polarograph type 7561L (Ag electrode) or 7563L (Au electrode)
Lead wire: ELW-32
|
Transmitter for Industrial Low-Concentration DO Analyzer
|
|