You have 0 items in your cart.
Process Analyzers
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
DKK-TOA HC-G80 (KCl Replenish-Free/Refillable) / HC-G82 (KCl Replenish-Free/Refillable) | Flow-Through Type Holder for Replaceable Tip Electrodes HC-G80 (KCl Replenish-Free/Refillable) / HC-G82 (KCl Replenish-Free/Refillable) HC-G80: Transparent holders made of PVC (heat resistance: 60 degrees C) ; maximum pressure resistance: 0.15MPa HC-G82: PP/SUS316 part (heat resistance: 80 degrees C) and PVDF/SUS316 part (heat resistance: 100 degrees C) ; maximum pressure resistance: 0.3 MPa | Transmitter for Industrial pH/ORP Analyzer |
|
|
|
DKK-TOA HC-G70 (KCl Replenish-Free/Refillable) / HC-G72 (KCl Refillable) | Immersion Type Holder for Replaceable Tip Electrode HC-G70 (KCl Replenish-Free/Refillable) / HC-G72 (KCl Refillable) HC-G70: Transparent PVC holder (heat resistance: 60 degrees C) and semi-transparent PP holder (heat resistance: 80 degrees C) available HC-G72: SUS316 holder (heat resistance: 80 degrees C) Length: 0.5 - 3.0m KCl refillable type stores KCl inside the holder Mounting bracket/flange available | Transmitter for Industrial pH/ORP Analyzer |
|
|
|
DKK-TOA HC-8Series | Designed for pH/ORP measurements in closed loop lines and environments where process pressure exists, such as pipes or sealed tanks and etc. Assemble electrodes available: 5610(KCl refillable type); 5910(KCl replenish-free type) | Flow-Through Type pH/ORP Detector |
|
|
|
DKK-TOA HC-7 Series | Ideal for pH/ORP measurements in tanks and open water applications Assemble electrodes available: 5600 (KCl refillable type); 5910 (KCl replenish-free type) Mounting flanges for tanks available (50A, 100A, 150A) | Immersion Type pH/ORP Detector |
|
|
|
DKK-TOA HC-64 | Ideal for pure water measurements like boiler water (low electric conductivity) Low flow injection of sampling allows for accurate measurement Assemble electrodes available: MG-511-2F (glass electrode) 4164-2F (reference electrode) 6149-2F (temperature compensation electrode) | pH Sensor for Pure Water Measurement |
|
|
|
DKK-TOA HBM-165H（2-wire） | pH / ORP Transmitter with HART Interface HBM-165H（2-wire） HART communication protocol interface with a 2-wire, 24 VDC circuit Available for both pH and ORP measurements Diecast aluminum enclosure, digital display and a wide range of other useful features One-touch auto calibration Self-diagnostic function Meas. range -1.00 - 15.00 ORP -2000 - 2000 mV | Transmitter for Industrial pH/ORP Analyzer |
|
|
|
DKK-TOA HBM-160/HBM-162（4-wire） | Industrial pH/ORP Transmitter HBM-160/HBM-162（4-wire） Multi-function pH/ORP analyzer for field installation in a compact aluminum diecast enclosure One-touch calibration and various self-diagnostic functions 2-point contact signal and 2-channel output including temperature (RS-232 optional) Power supply: AC90～264V, 50/60Hz Meas. range pH meter (HBM-160) : pH -1 - 15 ORP meter (HBM-162) : ORP -2000 - +2000mV | Transmitter for Industrial pH/ORP Analyzer |
|
|
|
DKK-TOA HBM-100A / HBM-102A | Compact DIN 96 size design Auto-detection of electrode deterioration Automated self-diagnosis of fault (burn-out output) Alterable alarm contact signal (4-point) 2-channel output (RS-232 optional) Meas. range: HBM-100A: pH； -1 - 15 HBM-102A: ORP； -2000 - +2000 mV | Panel Mount pH/ORP Analyaer |
|
|
|
DKK-TOA GSS‐304B（KCl Replenish-Free） / GSS‐314B（KCl Refillable） | Easy-to-replace electrode tip and reference electrode junction tip Alkali-resistant glass tips and hydrofluoric-acid-resistant glass tips available KCl non-refillable type for wastewater treatment; KCl refillable type for processes Selection of electrode holder: immersion type, drop-in type and flow-through type Meas. range pH： 0 - 14 | Exchangeable Tip pH Electrode |
|
|
|
DKK-TOA FS-3 | The cleaning process done by two filters alternately allows for continuous supply of sample Filtration rate 1 - 6 L/min (Varies from sample turbidity) | Sand Filter |
|
|
|
DKK-TOA FPA | Designed for oil refinery Batch continuous analysis of flash point of petroleum products such as light gas oil, kerosene and gasoline Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range 0 - 100 degrees C | Flash Point Analyzer |
|
|
|
DKK-TOA EMNA-10 | Continuous measurement of Na+ ion concentration of boiler water at ppb level Auto self-detection of degradation of ion-exchange system Meas. range 0 - 0.1/1 - 100/10 - 1000 ppb (manual swtiching) | Sodium Ion Monitor |
|
|
|
DKK-TOA ELP-005/006/007 ELP-045/046/047/048 | Suitable for bio-process tanks (fermentation tanks). KCl non-refillable and leadless type. Steam sterilizable, strong glass membrane, lead-free safe design Two types available: Liquid junctions of both pressurized gel type products (ELP-005/006/007) and double junction type products (ELP-045/046/047/048) Various electrode lengths available according to various tank sizes Meas. range pH： 0 - 14 | pH Sensor for Bio-Process Applications |
|
|
|
DKK-TOA DVP-03 | Designed for oil refinery Measures vapor pressure of petroleum products like gasoline Vapor pressure is measured by measuring static pressure of the sample that is jetting out from the nozzle at the constant temperature Measurement result attained via Reid method for vapor pressure Meas. range 0.01 - 1 MPa abs 0 - 0.15 MPa abs | Vapor Pressure Analyzer |
|
|
|
DKK-TOA CPA-21 | Designed for oil refinery Measures cloud point of petroleum products like gas-oil continuously Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range -30 - +20 degrees C | Cloud Point Analyzer |
|
|
|
DKK-TOA COL-330 | Measures color of oil products and coloration out of mixed heavy oil from heat converters, etc. Compact onboard spectroscope allows for a broad range of wavelength measurement Saybolt color, ASTM color, APHA color measurable Explosion-proof TIIS ExpdⅡBT4 certified | Process Colorimeter |
|
|
|
DKK-TOA COL-110 | Color and turbidity can be measured simultaneously by dual wavelength with just one meter Equipped with interactive easy-to-use color touch panel Meas. range Color: 0 - 10/20/30 (degrees C, DEG) Turbidity: 0 - 2/4/5/10 (degrees C, mg/L, ppm) | Colorimeter/Turbidity Meter |
|
|
|
DKK-TOA COL-110 | Colorimeter/Turbidity Meter COL-110 Color and turbidity can be measured simultaneously by dual wavelength with just one meter Equipped with interactive easy-to-use colortouch panel Meas. range Color: 0 - 10/20/30 (degrees C, DEG) Turbidity: 0 - 2/4/5/10 (degrees C, mg/L, ppm) | Turbidity Analyzer |
|
|
|
DKK-TOA CLF-1600 | Measures residual chlorine (total or free) happened in the water chlorination process Continuously measurement with polarographic method 1/5 reagent requirement of existing models RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 0.5/1.0 to 0 - 5/10 mg/L (ppm) (2-range) | Residual Chlorine Analyzer |
|
|
|
DKK-TOA CLF-120 | Reagentless Residual Chlorine Analyzer CLF-120 Measures total residual chlorine of drainage water without reagent Continuous measurement by polarographic method Meas. range 0 - 0.5/1.0, 0 - 1/2, 0 - 2/3 mg/L (ppm) | Reagentless Free Chlorine Analyzer |
|