|
BANTE 901P Portable pH/Conductivity/°C/°F Meter
|
|
Bante 901P portable multi-parameter meter used for measuring
the pH, Conductivity and TDS of liquids.
General Features:
Automatic Temperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Calibration due reminder prompts you to calibrate the meter regularly.
Automatic endpoint function freezes the stable measured values for
easy reading and recording data.
Manual temperature calibration provides... |
Multi-parameter Water Quality Meters
|
|
|
BANTE ECscan10M Pocket Conductivity Tester
|
|
ECscan10M pocket conductivity tester is suitable for measuring
the conductivity of moderate concentration liquids, e.g., spring
water, tap water, etc.
Features:
Standard platinum sensor provides fast and reliable measurements.
Single point calibration allows user to uses customized calibration
solution.
Automatic Temperature Compensation ensures high accuracy of
measurements.
Hold function freezes the current displayed value... |
Conductivity Meters
|
|
|
BANTE TDSscan10M Pocket TDS Tester
|
|
TDSscan10M pocket TDS tester is suitable for measuring the
Total Dissolved Solids of moderate concentration liquids. By
measuring the TDS values of liquid, you can determine the
water purity, or mineral levels in the water.
Features:
Standard platinum sensor provides fast and reliable measurements.
Single point calibration allows user to uses customized calibration
solution.
Adjustable TDS conversion factors for different liquids.
Automatic... |
Total Dissolved Solids (TDS) Meters
|
|
|
BANTE SALscan20 Pocket Salinity Tester
|
|
SALscan20 is a pocket multi-parameter salinity tester that used
to measures the salinity and conductivity of high concentration
liquids, e.g., salt water, sea water, etc.
Features:
Standard platinum sensor provides fast and reliable measurements.
Up to 3 points calibration allows user to uses customized calibration
solutions.
Manual temperature calibration provides accurate measured value.
Automatic Temperature Compensation ensures highly accurate... |
Salinity Meters
|
|
|
BANTE 820 Portable Dissolved Oxygen Meter
|
|
Bante820 is a basic portable dissolved oxygen meter that used
for measuring the dissolved oxygen concentration or percent
saturation in water.
Features:
1 or 2 points auto-calibration (100% in saturated air or air-saturated
water, 0% in zero oxygen solution).
Manual salinity and barometric pressure compensation.
Selectable readout in ppm, mg/L or % saturation.
Selectable either temperature units between degrees Celsius (°C)
... |
Dissolved Oxygen Meters
|
|
|
BANTE 901P Portable pH/Conductivity/°C/°F Meter
|
|
Bante 901P portable multi-parameter meter used for measuring
the pH, Conductivity and TDS of liquids.
General Features:
Automatic Temperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Calibration due reminder prompts you to calibrate the meter regularly.
Automatic endpoint function freezes the stable measured values for
easy reading and recording data.
Manual temperature calibration... |
Multi-parameter Water Quality Meters
|
|
|
BANTE JB-1A Star Magnetic Stirrer
|
|
Features:
JB-1A cartoon magnetic stirrer is a fascinating small instrument, which
used for stirring the non-viscous liquids.
The stirrer uses an electrical motor spinning the permanent magnet, its
speeds from 0 to 1250rpm and can quickly stirring liquids in short time. |
Magnetic Stirrers
|
|
|
BANTE P11-ROD pH Electrode
|
|
General purpose pH electrode, Rod-type glass bulb, Suitable for measuring the beer, blood products, cement, cosmetics, dairy products, fats/cream, fish products, low ionic, paint, soil samples. |
pH Electrodes
|
|
|
BANTE 502 ORP Electrode
|
|
502 ORP electrode used for measuring the samples with low oxidation-reduction potential. |
ORP Electrodes
|
|
|
BANTE K21 Conductivity Electrode
|
|
Professional conductivity electrode, Carbon sensor, Suitable for measuring the pure water or distilled water. |
Conductivity Electrodes
|
|
|
BANTE Barium Ion Selective Electrode (UK)
|
|
|
Ion Selective Electrodes
|
|
|
BANTE WXG-5 Semiautomatic Polarimeter
|
|
WXG-5 is a wide range semiautomatic polarimeter for measuring the concentration levels of samples, it widely used for cosmetic industries, medical, pharmaceutical and educational applications.
Easy Measurement:
The polarimeter with 589 nm sodium lamp. Switch on the power, the polarized light beam will immediately radiate to the polarizer,
filter. You can observed distinct visual fields through eyepiece. Put the sample cuvette into measuring field chamber, Press the
+ or... |
Polarimeters
|
|
|
BANTE PHscan10L Pocket pH Tester
|
|
PHscan10L pocket pH tester is equipped with a long-reach pH sensor
that used to measure the sample solution in the test tube.
Features:
2 points push-button calibration with auto-buffer recognition.
Hold function freezes the current displayed value for easy viewing.
Auto-power off feature helps you effectively conserve battery life.
Replaceable electrode reduces maintenance and replacement cost.
Waterproof feature to ensure complete protection in harsh
... |
pH Meters
|
|
|
BANTE 321-CL Portable Chloride Ion Meter
|
|
Features:
2 to 5 points push-button calibration from low to high concentrations.
Selectable multiple concentration units, including ppm, mg/L and mol/L.
Direct readout ion concentration simplifies the elaborate measurement
process.
mV measurement allows user to check performance of ion electrode.
AutomaticTemperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Automatic endpoint function freezes the stable... |
Ion Meters
|
|
|
BANTE 220 Portable pH/mV/°C/°F Meter
|
|
Bante220 is an economical portable pH/mV meter designed for
outdoor applications, which is equipped with a large LCD and
a standard BNC connecter. The meter is capable of connecting
the various pH electrodes to measure the pH value of samples.
Features:
2 points push-button calibration with auto-buffer recognition.
Automatically calculates and shows electrode slope after calibration.
Selectable temperature unit between degrees Celsiusanddegrees
... |
Oxidation Reduction Potential Meters
|
|
|
BANTE 902P Portable pH/ORP/Conductivity/°C/°F Meter
|
|
Bante 902P portable multi-parameter meter used for measuring
the pH, ORP, Conductivity, TDS, Salinity and Resistivity of liquids.
General Features:
Automatic Temperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Calibration due reminder prompts you to calibrate the meter regularly.
Automatic endpoint function freezes the stable measured values for
easy reading and recording data.
... |
Multi-parameter Water Quality Meters
|
|
|
BANTE ECscan10H Pocket Conductivity Tester
|
|
ECscan10H pocket conductivity tester is suitable for measuring
the conductivity of high concentration liquids, e.g., salt water,
wastewater, paint, etc.
Features:
Standard platinum sensor provides fast and reliable measurements.
Single point calibration allows user to uses customized calibration
solution.
Automatic Temperature Compensation ensures high accuracy of
measurements.
Hold function freezes the current displayed value... |
Conductivity Meters
|
|
|
BANTE TDSscan10H Pocket TDS Tester
|
|
TDSscan10H pocket TDS tester is suitable for measuring the
Total Dissolved Solids of high concentration liquids.
By measuring the TDS values of liquid, you can determine the
water purity, or mineral levels in the water.
Features:
Standard platinum sensor provides fast and reliable measurements.
Single point calibration allows user to uses customized calibration
solution.
Adjustable TDS conversion factors for different liquids.
Automatic Temperature... |
Total Dissolved Solids (TDS) Meters
|
|
|
BANTE 531 Portable Conductivity/Salinity/°C/°F Meter
|
|
Bante531 portable conductivity meter used for measuring the
electrical conductivity and salinity of liquids.
Features:
Up to 5-point push-button calibration allows user to uses customized
calibration solutions.
Adjustable cell constants, temperature coefficients, normalization
temperature etc.
In salinity measurement modes, selectable practical salinity (PSU) or
seawater measurement standard (ppt).... |
Salinity Meters
|
|
|
BANTE 821 Portable Dissolved Oxygen Meter
|
|
Bante821 is professional dissolved oxygen meter designed for
outdoor applications. The meter is equipped with a polarographic
sensor for measurement of dissolved oxygen concentration or
percent saturation in water.
Features:
1 or 2 points auto-calibration (100% in saturated air or air-saturated
water, 0% in zero oxygen solution).
Automatically compensates salinity and barometric pressure after
manual input.
Selectable... |
Dissolved Oxygen Meters
|
|