MSR147W2D WiFi Wireless Data Logger MSR147W2D with plug-in temperature and humidity sensors Malaysia

Category: MSR Dataloggers

WiFi Wireless Data Logger MSR147W2D
with plug-in temperature and humidity sensors

memory capacity for over 1 m measured values · 5 connections for plug-in temperature and humidity sensors · ideal for measuring the physiological properties of textiles 

The easy to use MSR147W2D wireless data logger is ideal for remote monitoring of temperature and humidity. This can be of great benefit when testing the material and construction properties of functional clothing, for example. The temperature and humidity sensors, which are available in different cable lengths, can be easily attached to the body of a test person and the physiological parameters determined, such as skin temperature and moisture level can be conveniently accessed online via WiFi/WLAN.

Plug-in, pre-calibrated temperature and humidity sensors

The sensors supplied by MSR Electronics GmbH can be inserted and removed individually. Due to the automatic configuration feature, the data logger instantly recognises when a sensor is inserted. The calibration data is stored in the corresponding sensor. In addition to the plug-in temperature and humidity sensors, you can have your MSR147W2D equipped with an internal air pressure and/or acceleration sensor.

Integration in WLAN/WiFi network

No wiring costs and no time-consuming manual reading of measured values. Measured data can even be sent from places with difficult access. Integration either into an existing WiFi or via an access point, by means of mobile network access where required, into a separate wireless network.

 

Product features Wireless Data Logger MSR147W2D

General functions

  • Wireless data logger (WiFi) with 5 connections for pre-calibrated plug-in temperature and humidity sensors
  • Internal sensors for air pressure and 3-axis-acceleration available (see configurator)
  • More than 1 million measured values storage capacity in the internal memory
  • Lithium-polymer battery 230 mAh, rechargeable via the USB connection
  • Free MSR PC software: MSR Setup, Reader, Viewer and Online software 

WLAN (WiFi) functions

  • Integration either into an existing WiFi or via an access point, by means of mobile network access where required, into a separate wireless network
  • WiFi range can be extended with a commercially available repeater
  • Data storage is guaranteed even if the transmitter fails
  • Alarm message if limit value is exceeded
  • MSR SmartCloud: retrieve, analyse and export measured data online at any time; alarm message if limit value is exceeded
  • Free MSR WLAN software for graphical visualisation of the measured values transmitted over WiFi (WLAN), components for LabVIEW available\\

 

Technical data of the sensors, housings and batteries

Technical details can be found on the Configurator tab.

 

General technical data of the WiFi Wireless Data Logger MSR147W2D

Memory capacity: Over 1 000 000 measured values.
Key button:
With the button you can activate and deactivate the display, the WiFi-module and the data recording.

LED:

 

Blue: Record indicator
Red: Alarm indicator
Yellow: Battery charge indicator

Power supply:

Lithium-polymer battery, rechargeable via the USB connection

OLED display:

High-contrast, brilliant OLED (organic light-emitting diode) colour display to show data and graphical charts, resolution 96 x 64 pixels.

Interface:
USB, WLAN (WiFi)
PC Software:

MSR Setup, Reader, Viewer and Onlinesoftware

MSR WLAN Local Viewer

System requirements: Windows 7 or higher, USB port

Operation conditions:
Temperature: -20...+65 °C
Storage conditions:

Temperature: +5...+45 °C (ideal storage conditions for the battery)

Humidity: 10...95 % relative humidity, non-condensing

Standards:
The MSR147W2D complies with EU-Directives RoHS/WEEE.

 

 
Ask about this product