Bante510 benchtop conductivity meter used for measuring the
conductivity and TDS of liquids. The meter is widely used in
environmental and ecological studies for monitoring the purity
and concentration of water.
Features:
Large backlit LCD display shows mode indicators and help messages.
Up to 3-point push-button calibration allows user to uses customized
calibration solutions.
Auto-Ranging for conductivity and TDS measurements.
Adjustable TDS factors, cell constants and temperature units.
Automatic Temperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Automatic endpoint function freezes the stable measured values for
easy reading and recording data.
Manual temperature calibration provides accurate temperature value.
Help message as a operational guide to helps you understand how
to use meter.
Setup menu lets user customizes calibration points, temperature units,
automatic or manual hold function, auto-off feature to meet personal
preferences.
Reset function can resumes all settings to factory default values.
Specifications: | ||||||
Model | Bante510 | |||||
Conductivity Range | 0~20mS/cm (Max.200mS/cm) | |||||
Conductivity Accuracy | ±1% Full Scale | |||||
Calibration Points | Up to 3 points | |||||
Calibration Solutions | 10uS/cm, 84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm | |||||
TDS Range | 0~10ppt (Max. 20ppt) | |||||
TDS Accuracy | ±1% Full Scale | |||||
TDS Factor | 0.1~1.0 (Default 0.5) | |||||
Temperature Range | 0~105°C, 32~221°F | |||||
Temperature Accuracy | ±1°C | |||||
Temperature Calibration | Manual | |||||
Temperature Compensation | 0~100°C, 32~212°F, Automatic or Manual | |||||
Temperature Coefficient | 0.0~10.0% per °C | |||||
Cell Constant | K=0.1, 1, 10, Selectable | |||||
Normalization Temperature | 25°C | |||||
Auto-Off | Manual or Automatic (180 minutes after last key pressed) | |||||
Hold Function | Manual or Automatic endpoint | |||||
Reset Function | Yes | |||||
Connector | 6-pin | |||||
LCD Display | Custom Dual-Display LCD (135×75mm) | |||||
Power Requirements | DC9V, using AC adapters, 220VAC/50Hz | |||||
Dimensions | 210(L)×205(W)×75(H)mm | |||||
Weight | 1.2kg | |||||
Order Code and Accessories: | ||||||
Order Code | Accessories | |||||
Bante510-UK |
K10 Conductivity Electrode (Made in UK) TP-10K Temperature Probe Conductivity Calibration Solutions (146.5uS/cm, 1413uS/cm, 12.88mS/cm) DC9V Power Adapters |
|||||
Bante510-S |
CON-1 Conductivity Electrode TP-10K Temperature Probe Conductivity Calibration Solutions (146.5uS/cm, 1413uS/cm, 12.88mS/cm) DC9V Power Adapters |
|||||
Bante510-DH |
CON-1 and CON-10 Conductivity Electrode TP-10K Temperature Probe Conductivity Calibration Solutions (146.5uS/cm, 1413uS/cm, 12.88mS/cm) DC9V Power Adapters |
|||||
Bante510-DL |
CON-1 and CON-0.1 Conductivity Electrode TP-10K Temperature Probe Conductivity Calibration Solutions (146.5uS/cm, 1413uS/cm, 12.88mS/cm) DC9V Power Adapters |