DKK-TOA

  • Filter
  Name SKU Description Category
DKK-TOA ME-100 series (compact and lightweight leadless type) Compact toroidal, heat resistant PVC type or Teflon detector with excellent corrosion resistance are available Accurate results for high conductivity corrosive solutions (such as strong acid/alkali)  Types of detectors available: flow-through, immersion, pipeline insertion, drop-in, etc.  Meas. range Minimum : 0 - 500 μS/cm Maximum: 0 - 2000 mS/cm Electromagnetic Conductivity Detector
DKK-TOA MDM-25A(Including a PVC Sensor) Concentration of acid and alkali measurable High concentration range measurable by electromagnetic method Analog output enables easy continuous measurement Switchable concentration and conductivity rate Easy maintenance requires no daily calibration Meas. range (conductivity rate) 0 - 200 S/m Portable Electromagnetic Meter
DKK-TOA MDM-137A (2-wire) Electromagnetic Concentration Transmitter MDM-137A (2-wire) Electromagnetic concentration analyzer for field installation in a compact and rigid aluminum enclosure   Conductivity of NaCl, HCl, H2SO4, etc. are measured and converted to concentration (%)data automatically Assignable measurement range Examples of measurement ranges NaCl: 0 - 10% HCl: 30 - 40% H2SO4: 93 - 99.5% NaOH: 0 - 15% Transmitter for Electromagnetic Conductivity Analyzer
DKK-TOA MDM-135A (2-wire) Electromagnetic Conductivity Transmitter MDM-135A (2-wire) Electromagnetic conductivity analyzer for field installation in a compact and rigid aluminum enclosure  Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) Alterable output range Meas. range Minimum : 0 - 2 mS/cm Maximum : 0 - 2000 mS/cm Transmitter for Electromagnetic Conductivity Analyzer
DKK-TOA MBM-162 (4-wire) Electromagnetic Concentration Transmitter MBM-162 (4-wire) Electromagnetic concentration analyzer for field installation in a compact aluminum diecast enclosure Conductivity of NaCl, HCl, H2SO4, etc. are measured and converted to concentration (%) data automatically 2-point contact signal, 2-channel output including temperature (RS-232 optional)  Examples of measurement ranges NaCl: 0~10% HCl: 30~40% H2SO4: 93~99.5% NaOH: 0~15% Transmitter for Electromagnetic Conductivity Analyzer
DKK-TOA MBM-160(4-wire) Electromagnetic Conductivity Transmitter MBM-160(4-wire) Electromagnetic conductivity analyzer for field installation in a compact aluminum diecast  enclosure Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) 2-point contact signal, 2-channel output including temperature (RS-232 optional) Power source: 90 - 264VAC, 50/60Hz Meas. range Minimum: 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm Transmitter for Electromagnetic Conductivity Analyzer
DKK-TOA MBM-102A Panel Type Electromagnetic Concentration Analyzer MBM-102A Compact DIN 96 size Conductivity of NaCl, HCl, H2SO4, etc. are measured and converted to concentration (%) data automatically Assignable measurement range 2-point contact signal, 4 - 20mA output (RS-232 optional) Examples of measurement ranges NaCl: 0 - 10% HCl: 30 - 40% H2SO4: 93 - 99.5% NaOH: 0 - 15% Panel Type Electromagnetic Conductivity/Concentration Analyzer
DKK-TOA MBM-100A Panel Type Electromagnetic Conductivity Analyzer MBM-100A Compact DIN 96 size Accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) 2-point contact signal, 4 - 20mA output (RS-232 optional)    Meas. range Minimum : 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm Panel Type Electromagnetic Conductivity/Concentration Analyzer
DKK-TOA MAC-355 pH Meter with Auto Calibration MAC-355 Automatic cleaning and 2-point calibration functions serve long-term reliable pH measurement with just little maintenance Lift-up type design incorporated with air jet cleaning allows for superior cleaning effect and stable measurement  Self-diagnosis and useful message display  Meas. range pH: -1 - 15 pH Meter with Auto-Calibration/Chemical Cleaner
DKK-TOA LHC-7D Electrode Holder with Lift Up Type Jet Cleaner LHC-7D A detector which can lift up from the sample water and remove fouling from the pH/ORP electrode effectively. Automatic cleaning system that applies alternate streams of wash water and chemical solution (such as a 5% hydrochloric acid solution) to clean the pH/ORP detector. Immersion Type pH/ORP Detector with Some Cleaners
DKK-TOA JOC-711C / JOC-950C Detector with Water Jet Cleaner JOC-711C / JOC-950C Cleaning electrode contamination by jetting water or air onto the electrode Immersion type (JOC-711C) and drop-in type (JOC-950C) Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste) Immersion/Drop-in Type DO Holder/Detector with Water Jet Cleaner
DKK-TOA JHC-7C/JHC-8C Immersion Type Detector with Water Jet Cleaner JHC-7C/JHC-8C Detectors composed of holder and water-jet cleaner: Immersion type(JHC-7C) and flow-through type(JHC-8C)  By spraying water onto the tip of electrode, the water pressure washes fouling away  One-touch detachable holder and easy maintenance Simple installation with a sensor, timer&electromagnetic valve integrated unit Immersion Type pH/ORP Detector with Some Cleaners
DKK-TOA IM-32P 2-channel type, simultaneous measurement and display of pH/ions Power-saving design; rechargeable battery adaptable Waterproof design (IP67: 1m depth, up to 30mins) Data storage up to 1000 points PC and external printer connectable   Measurement items pH, ORP, ions, temperature (ORP and ion electrodes sold separately) Handheld Ion/pH Meter
DKK-TOA ICA-2000 Series Compact main unit holding up to 3 pumps and 2 detector units Simple system expansion by optional combined pump-detector unit installation Remote data monitoring capability due to LAN based main unit/PC control signal connection PC linked pos+/neg- ion 2-channel real-time chromatograph data display and report printout Non-metal pump for post column reactor is available Meet a wide range of water supply measurement needs such as cyanide/bromate, chlorate, etc. High sensitivity analysis... Ion Chromatograph
DKK-TOA IA-300 6 cations or 7 anions simultaneous measurement   Simple and easy-to-use for any user  Results automatically analyzed and calculated internally  Displayable and printable results  Suppressor method available for anion measurements   Measurement items Anions: PO43-, F-, Cl-, NO2-, Br-, NO3-, SO42- Cations: Li+, Na+, NH4+, K+, Mg2+, Ca2+ Ion Analyzer
DKK-TOA HYM-300 Continuous measurement of hydrazine concentration in boiler water Stabilization determination function during calibration Best suited for monitoring of residual hydrazine concentration  Meas. range 0 - 999.9 μg/L Hydrazine Transmitter
DKK-TOA HSCA-2000 Designed for oil refinery Enables low-concentration measurement ranged 0 - 10 ppm  Adopts credible energy-dispersive X-ray spectroscopy method Simple composition (no motor and burner) Easy-to-use touch panel  Explosion-proof TIIS ExpdⅡBT4 certified  Meas. range 0 - 10 ppm 0 - 500 ppm Process Sulfur Content Analyzer
DKK-TOA HM-7J Easy-to-read analog display  AC/DC 2-way power supply  ORP measurable  mV shift function  Cost-effective designed in a compact size Meas. range pH 0 - 14 ORP 0 - ±1400 mV (electrode sold separately) pH meters
DKK-TOA HM-30R Large color graphic LCD display 0.01/0.001 pH display switchable High-performance with the Strong&Float (internal solution concentration checker) pH electrode USB (Host) and LAN equipped Multiple sample measuring capability (turntable connection) Meas. range pH 0.000 - 14.000 0.0 - ±2000.0mV (ORP electrodes sold separately) 0 - 100.0℃ pH meters
DKK-TOA HM-30P / 31P Standard model for pH measurement (HM-30P) Sophisticated type, capable of pH and ORP measurements (HM-31P) Power-saving design; rechargeable battery adaptable Waterproof design (IP67: 1m depth, up to 30mins) Data storage up to 1000 points  Meas. range pH 0 - 14 (HM-30P/31P) 0 - 100.0 degrees C (HM-30P/31P) 0 - ±2000 mV (HM-31P) (ORP electrodes sold separately) Handheld pH/ORP Meter