For Food Industries

For Food Industry

About HACCP
HACCP stands for “Hazard Analysis Critical Control Point” and is an internationally recognised and
recommended system of food safety management. It focuses on identifying the “critical points” in a
process where food safety hazards could arise and putting steps in place to control such hazards.
Record documentation is also an important part of a HACCP system.
Testo offers a wide range of instruments to help you keep HACCP compliant, giving you extra
reassurance that your methods are safe.

BS EN Regulations
Further EC regulations are placed on measuring instruments and data loggers when used in specific
environments.
BS EN 12380 is the regulation for data loggers used within the transportation and storage of chilled
and frozen foods. Testo’s 175-T1 and 175-T2 data loggers comply with this regulation (see page 14
for further details).
BS EN 13485 is the regulation for portable measuring instruments used within the transportation and
storage of chilled and frozen foods.

 


Mini Thermometer
For simple spot checks in all food environments. Measuring range of
-50 to +150 °C with up to 1 °C accuracy, 120 mm long/200mm long


Mini Surface Thermometer
For quick and easy surface temperature measurement. Measuring
range of -50 to +250 °C with up to 1 °C accuracy, 120 mm long


Waterproof Mini Thermometer
Dishwasher-safe thermometer (IP 68) for simple spot checks in all
food environments. Measuring range of -40 to +230 °C with up to
0.3 °C accuracy, 120 mm long

 


Testo’s ultimate penetration thermometer is ideal for quick and uncomplicated core temperature
checks in all areas of food production, preparation and storage.
• Dishwasher-proof TopSafe protection case
for easy cleaning (IP 67)
• Wide measuring range with high accuracy
• Fast measurement rate (2 measurements per second)
• User adjustable high and low alarms
• Belt clip and wall bracket included
• BS EN 13485 compliant when used with TopSafe protection case

Technical Data
Measuring range -50 to +275 °C
Accuracy ±1 °C (+100 to +275 °C)
±1 digit ±0.5 °C (-30 to +99.9 °C)
±1 °C (-50 to +30.1 °C)
Resolution 0.1 °C
Sensor type NTC
Battery life 350 hours

 


Robust hand-held T-bar thermometer, with interchangeable measurement tips, for control
measurements in abattoirs, refrigerated storerooms and meat processing.
• Water resistant (IP 65)
• Optional interchangeable probes
• Two user-defined limit values,
alarm visual or audible
• Built-in backlit display
• 2 line display
• BS EN 13485 compliant

Technical Data

Measuring range -50 to +275 °C
Accuracy ±0.5 °C (-20 to +100 °C)
±1 digit ±1 °C (-50 to -20 °C)
±1 % (+100.1 to +275 °C)
Resolution 0.1 °C
Sensor type NTC
Battery life 80 hours (auto off 10 mins)

 


Designed for use throughout the food industry this fast and accurate thermometer can be used
with both corded and optional wireless probes.
• Wide range of rugged probes for every food application • Optional print out facility
• Optional wireless probe measurement • Audible alarm (adjustable alarm limits)
• Auto hold with user-settable times • Date and time set up function
• BS EN 13485 compliant when used with TopSafe protection case

Technical Data

Measuring range -50 to +400 °C
Accuracy ±0.3 °C (-20 to +70 °C)
±1 digit ± (0.7 °C ±0.5 % of mv)
(remaining range)
Resolution 0.1 °C (-50 to +199.9 °C)
1 °C (remaining range)
Sensor type Type T
Battery life 200 hours (connected probe, backlight off)
68 hours (connected probe, backlight always on)

Testo 926 Starter Set
Single channel type T thermometer including waterproof TopSafe
protection case, standard immersion/penetration probe, battery and
calibration protocol


Designed for use throughout the food processing and service industry, this versatile thermometer
can be used with both corded and optional wireless probes.
• Wide range of probes for all areas of food measurement • Continuous display of max/min values
• Optional wireless probe measurement • Adjustable audible alarm limits
• Date and time set up function • Optional print out facility
• TopSafe protective case guards against water, damage and dirt

Technical Data
Measuring range -50 to +150 °C
-0 to +275 °C
Accuracy ±0.2 °C (-20 to +80 °C)
±1 digit ±0.3 °C (remaining range)
Resolution 0.1 °C
Sensor type NTC
Battery life 200 hours (connected probe, backlight off)
68 hours (connected probe, backlight always on)

 


Highly versatile, multi-channel thermometer with logging ability and location management. A wide
range of optional probes available including Pt100, T/C Type K, T/C Type T and wireless probes.
• System accuracy up to 0.05 °C
• Stores up to 10,000 readings
• PC-software for filing and documenting measurement data
• Storage of single measurements or measurement series by location
• Print out on site with optional Testo infrared printer

Technical Data
Measuring range -200 to +800 °C -200 to +1,370 °C
Accuracy ±0.2 °C (-100 to +199.9 °C) ±0.3 °C (-60 to +60 °C)
±1 digit ±0.2% of mv (remaining range) ± 0.5% of mv (remaining range)
Resolution 0.05 °C 0.1 °C
Sensor type Pt100 K
Battery life 200 hours (connected probe, backlight off)
68 hours (connected probe, backlight always on)

 


Compact infrared thermometer ideal for quick measurements at delivery, storage and hot cupboards.
For quick surface and air measurements of fridge/freezers, hot cupboards and point of delivery.
• Only 80mm long
• Fast response for bulk storage areas
• Packaging remains undamaged
• Rugged TopSafe case is dishwasher-proof
• Spot ratio 1:1
• Display min/max values

Technical Data

Measuring range -25 to +250 °C
Accuracy ±3 °C (-25 to -21 °C)
±1 digit ±2 °C (-20 to -2.1 °C)
±1 °C (-2 to +40 °C)
±1.5 °C (+40.1 to +150 °C)
±2 % of mv (+150.1 to +250 °C)
Resolution 0.1 °C (-9.9 to +199.9 °C)
1 °C (remaining range)
Sensor type Integrated infrared sensor
Battery life 40 hours (typical)

 


Innovative pocket sized measurement technology for air and surface temperature measurement.
• Surface temperature IR measurement with 1-point laser spot marking and 6:1 optics
• Air temperature measurement
• Display of differential temperature e.g. between surface and air
• Hold function and max/min values

 



An infrared thermometer ideal for non-contact, quick
surface or air temperature measurement checks.
• Small and practical
• Non-contact measurement without damaging
the packaging
• Core temperature measurement with thin, robust
measuring tip (826-T3 & 826-T4 models)
• Upper and lower limit value monitoring with optical alarm
(audible alarm on 826-T2 & 826-T4 models)
• Wall/belt holder included
• Dishwasher-proof TopSafe protection case (IP 67)
• Spot ratio 6:1

 


High accuracy single channel mini temperature data logger with digital display, ideal for monitoring
temperature during transportation and storage.
• Waterproof (IP 65)
• Eliminates time needed for paper records
• Max/min values can be displayed
• Secure data even if the battery goes
down (typical life of 1.5 years)
• Complies with BS EN 12830
• Wall bracket and padlock included


Starter Set
Mini temperature data logger, 1 channel, ComSoft 3 Basic, wall
bracket, lock, interface including USB connection cable, battery

 


Compact data loggers for temperature measurement that guarantees uninterrupted monitoring of
air temperatures.
• Memory up to 16,000 readings
• 1 line clear LCD display
• Eliminates time needed for paper records
• Secure data even if the battery goes down
(typical life of 2.5 years)
• Complies with BS EN 12830

Testo 175-T1 Data Logger
Temperature data logger, 1 channel, internal
sensor. Supplied with wall holder and calibration
protocol

Testo 175-T2 Data Logger
Temperature data logger, 2 channels, with internal
sensor and external probe socket. Supplied with
wall holder and calibration protocol

 




ComSoft Basic for 175 USB interface
Testo ComSoft software enables you to monitor, save and print
logger data. Once downloaded, data can be shown in a table or
graph format


Fast Printer and Logger Control
Infrared printer that prints straight from any Testo product (with print
function), without the need for PC connection. Can also be used to
stop and restart data loggers


Data Collector with USB Interface
Collects the data from your loggers and downloads this to PC via
the available ComSoft software, without the need to remove loggers
from their location. Can also be used to stop and restart the loggers

 


The quality of cooking oil has a direct influence on both the quality of the food being deep fried,
and on cost. Frequently used oil effects taste and can lead to nausea or illness.
Oil which is changed prematurely generates unnecessary costs. The Testo 265 cooking oil tester
allows you to effectively carry out checks on the quality of the oil and determine if the limit values
are reached.
• Two user-defined quality limit values
• Alarm function: 3 colour LED (green, yellow, red)
• Display: Maximum measurement temperature exceeded - Minimum measurement temperature not reached
• Dishwasher-proof TopSafe protection case
• Calibration adjustment facility
• Back to back testing without the sensor having to cool down

Testo 265 Set
Testo 265 cooking oil tester including TopSafe protection case, wall
holder and sensor protection cap in a top quality aluminium case

 


pH measuring instrument ideal for use in meat processing applications.
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• pH tip embedded in virtually unbreakable plastic
• Measuring tip can be changed by user
• Automatic full-scale value recognition
• 1, 2 or 3 point calibration possible


Testo 205 Instrument Set
On-hand pH/°C measuring instrument with penetration probe,
storage cap, belt/wall holder

Testo 205 Starter Set
On-hand pH/°C measuring instrument with penetration probe, storage
cap, gel and calibration bottles (250ml pH 4+7), belt/wall holder and
aluminium case


 

AddThis Social Bookmark Button

Additional information