Products

HIO0006-3286-20 POWER CLAMP METER

Category: Power clamps

 

Functionality and Safety Packed into a Handheld Unit 

  • Use as a single-phase power meter
  • Measure phase on a single-phase line
  • Simple checking of three-phase lines
  • Check power supply fluctuations
  • For harmonic suppression
  • External output of data to PC
  • Printer output to 9442 (optional)
Specifications
Measurement lines Single-phase/two-wires, Three-phase/three-wires (balanced load only)
Measurement items Voltage, current, voltage/current peak, effective/reactive/apparent power(Single-phase or 3-phase), power factor, reactivity, phase angle, frequency, phase detection(3-phase), voltage/current harmonic levels(up to 20th)
Measurement ranges Voltage: 150.0 V to 600 V, 3 ranges
Current: 200.0 A or 1000 A, 2 ranges
Power: 30.00 kW to 1200 kW, 14 combination patterns
Note: 3-phase power is calculated and displayed on the basis of a balanced, 50/60 Hz, sine wave input. For apparent power and reactive power, the unit of watts in the above table is replaced by VA and var respectively.
Basic accuracy at 50/60 Hz, COS =1 Power/single-phase: ±2.3 % rdg. ±5 dgt., Power/3-phase: ±3.0 % rdg. ±10 dgt. (at balanced load)
Voltage/Current accuracy Voltage: ±1.0 % rdg. ±3 dgt., Current: ±1.3 % rdg. ±3 dgt. (at 45 to 66 Hz)
Frequency characteristics 30 Hz to 1 kHz
Other functions Phase detection, Record (Max. value/Min. value), Battery capacity display, Data hold, Auto power off, Data output (RS-232C interface by optical insulating coupler)
Display update rate NORMAL: approx. 1 time/ sec
SLOW: 1 time/ 3-sec
HARM meas.: approx. 1 time/ 2-sec
Power supply 6LR61 alkaline battery x 1 (continuous operation max. 25 hours)
6F22 manganese battery x 1 (continuous operation max. 10 hours)
Dimensions (WxHxD) 62 mm (2.44") x 260 mm (10.24") x 39 mm (1.54")
Core jaw diameter: 55 mm (2.17"), 80mm (3.15") x 20mm (0.79") busbar max.
Weight 550 g (19.4 oz)
Ask about this product