|
Fluke 373 True-RMS 600A/600V AC Clamp Meters
|
|
600 A ac current measurement with fixed jaw
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement to 6000Ω with continuity detection
1000 µF capacitance measurement
State of the art signal processing allows for use in noisy electrical environments while providing stable readings
Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch... |
AC Leakage Clamp Meter
|
|
|
Fluke Networks CFP-100-M CertiFiber Pro Multimode OLTS Kit
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks ATAP Aggregating In-Line Taps
|
|
Plug-and-play simplicity for fast analysis and deployment
Decrease budget required for visibility on redundant links
Single interface monitoring and analysis for full duplex links
Dual link models are ideal for meshed trunk analysis using single port analysis devices
Media conversion for Gigabit links expands the reach of your existing analysis solutions
Eliminates the need for spanning resources and configurations
|
Taps
|
|
|
Sew 2713 PU
|
|
Designed to proof: -Phasing sticks. -High voltage detectors (contact type only, not to be used with non contact proximity detectors.) -High voltage and voltage testers.● Battery operated.● Led indicates when power is “ON”.● Small and hand-held.● Quick connection with normal 4mm test leads. |
H.V. Proving Unit (DCV)
|
|
|
Sew 4235 ER
|
|
● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.
... |
4 Wire Earth Resistance & Resistivity Testers
|
|
|
Sew 2803 IN (Ranges: 0.5kV, 1kV, 2.5kV, 5kV)
|
|
FEATURES
● Microprocessor-controlled.● Four insulation test voltages.● Insulation resistance; auto ranging on all ranges.● Bargraph indicates test voltage; rise and decay can be observed during tests.● Visual and audible warning if external voltage is present.● EnerSave™ feature to extend battery life.● 2 Lines × 16 characters large LCD.● Low battery consumption.● Low battery indicator.● Overload protection.● Auto-off.● Show test time... |
Digital (1kV up) H.V. Insulation Testers
|
|
|
Sew 1151 IN-M
|
|
FEATURES
● High Contrast OLED display.● Designed for viewing in the dark, for mining industry.● Auto-range microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Battery test at switch ON/Reset.● Safety voltmeter before each test.● Auto-discharge on all tests and all ranges.● Leads auto-null key.● Test auto-stop.● Smart hold and stop on voltmeter AC/DC.● Ener-Save.● Continuity short circuit >220mA.● Continuity open circuit voltage of... |
Insulation & Multifunction Testers (OLED Display)
|
|
|
Sew 810 EL
|
|
FEATURES
● Wiring check.● Can be used on 2 wires L-E (ELCB/RCCB/GFCI tester).● Can be used on 3 wires L-E-N (with wiring check).● Sense automatically 50 or 60 Hz.● No battery required.● Simple operation.● Current injected in phase with the voltage.● Fused.● Wide operating voltage (195Vac to 265Vac).● Other voltage optional (110V).● Robust.
SPECIFICATIONS
Wiring check... |
Analogue ELCB Testers
|
|
|
Sew 1826 NA
|
|
FEATURES
● Microprocessor-controlled.● Measures Earth Resistance without the need for poles in the ground or external measuring wires.● Earth measurement uses the real earth current path and the current generated by the electric network, without the need for any disconnection.● The Earth Resistance displayed is exactly the earth resistance that the earth current will need to... |
Electrical Network Analyzers
|
|
|
Sew 162 CB
|
|
FEATURES
Filter Probe
● Works with any Tone Generator to identify wires.● Volume control for increasing sensitivity and adjustable to suit work environment.● 2 operation modes: Filter on / Filter off.● The auto-off function (5 minutes) prevents battery consumption.● Power supply is available in any 9V battery with a life of approximately 50 hours.● A phone jack is designed for headset or handset.●... |
Cable Tracers
|
|
|
Sew ST-850
|
|
FEATURES
● Two functions in one unit: open phase and phase sequence detection.● Lamps let you determine at-a-glance if phase is open.● Large size alligator clips for easy clipping onto switch-boards terminals.● Checks a wide range of 3-phase power sources.● Special test leads length are available on request.● Push button switch is designed to minimize damage due to negligence.
SPECIFICATIONS
... |
Phase Sequence Indicators (Contact Type)
|
|
|
Sew ST-2600
|
|
FEATURES
● Full auto range for V.A and Ω functions. ● Data hold function freezes the reading in dimly lit or hard to reach places. ● Low battery indication. ● Built-in buzzer for continuity test.● Safety design throughout with no exposed metal parts. Shielded banana... |
AC Clamp Meters
|
|
|
Sew 6400 DM
|
|
FEATURES
● 4000 counts LCD with a maximum display of 3999.● Angled display design helps the user to identify the reading of value easier.● Auto ranging designed.● Range change function.● Continuity check.● Diode measurement.● Data hold function.● Low battery indication.● Over range indication.● Fuse protection.● Special hook design used to hang the meter for ease of use.
... |
Digital Multimeters
|
|
|
Sew 6237 DLRO
|
|
FEATURES
● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™... |
Low Resistance Ohm Meter
|
|
|
Sew ST-2000 A
|
|
Principle : Moving ● Accuracy : ± 0.5% of F.S. ● Scale Length : Approx. 135mm(5-3/8”) ● Weight : Approx. 1.7kg ● Dimension :196(L) x 170(W) x 87(D)mm ● Case Material : Bakelite with glass window |
Portable Instrument
|
|
|
Sew C5F Series
|
|
Material: Nylon● Red and black each (set)● Removable cap for attaching alligator clips● Press can be used with all sew 4mm jack test leads● Rating : EN 61010-031:2002 + A1:2008 CAT IV 1000V 0.5A / CAT IV 690V 2A CAT IV 500V 10A / CAT IV 250V 10A |
Adapter
|
|
|
CM-01 DC/AC Clamp Meter
|
|
High Resolution DC/AC 10mA
23 mm Large Jaw Diameter
One Touch Zero for DCA adjustment
|
DC/AC Current Clamp Meter
|
|
|
Testo 0554 0004 Silicone Heat Paste
|
|
Improves heat transfer in surface probes
Maximum temperature: 260 ° C
|
Adhesive
|
|
|
Testo 405 (0560 4053) Thermal Anemometer w/ Telescopic Velocity stick
|
|
Volume flow calculation up to 99,990 m3/h
Temperature measurement
Ideal for measurements in ducts
Easily read data at any angle with rotating display
Telescopic handle to 300 mm
Cap rotates to protect sensor against moisture and dirt, 118 in long telescopic handle
|
Anemometers
|
|
|
Chauvin F401 Clampmeter
|
|
AC/DC TRMS Clampmeter
All the basics for mains powered installations and equipment
For medium and high-power work, the F400 Series provide maximum safety whatever the measurement conditions and type of installation.
Chauvin Part No: P01120941
|
AC/DC Clampmeter
|
|