By Brands

Brands

  • Filter
  Name SKU Description Category
Kyoritsu 8008 Multi-Trans How to Use Clamp your instrument around the pick-up coil of the multi-tran. Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below. Multiply the reading of your clamp meter by 10 to obtain the current value measured. Sensors, Multi-Trans, Clamp adaptors
Kyoritsu Discontinued products MODEL Descriptions Remark Alternative 1007 Digital Multimeter   1009 1008 Digital Multimeter   1009 1010 Solar Pocket Tester Solar battery No 1015 Digital Multimeter   1018 1017 Digital Multimeter   1018 1020 Digital Multimeter Automatic mode switchingbetween AC and DC voltage measurements. No 1103 Analogue Multimeter   1110 1104 Analogue Multimeter with 1000V range and10A... Discontinued products
Kyoritsu 2012R Kyoritsu 2012R   Innovative Multhimeters with current measurements up to 120A AC/DC • Unique Open Jaw technology for AC/DC current measurements • Very compact and as reliable as a tradictional full size multimeter Digital Multimeter with AC/DC Clamp Sensor
Kyoritsu KEW MATE 2000 Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR. • 3400 counts with bargraph display. • Pocket size and heavy duty design.   Digital Multimeter with AC/DC Clamp Sensor
Kyoritsu KEW MATE 2001 Capable of measuring AC and DC currents up to 100A with OPEN CLAMP SENSOR. • 3400 counts with bargraph display. • Pocket size and heavy duty design.   Digital Multimeter with AC/DC Clamp Sensor
Kyoritsu 1051/1052 High Accuracy, High Performance and Reliable Measurements • 0.09% basic DC accuracy • Large display with 6,000 counts • True-RMS Measurements • True-RMS or MEAN value detection mode can be selected * • Low-pass filter for motor drive measurements • User calibration function Safety design for industrial use • Complies with IEC 61010-1 CAT.IV 600V,CAT.III 1000V • Terminal shutter to prevent incorrect test leads'... Digital Multimeters
Kyoritsu 1061/1062 High Accuracy, High Performance and Reliable Measurements • 0.02% basic DC accuracy • Large display with 50,000 counts • Dual display for double indication for AC and DC, V and Hz, etc. • True-RMS Measurements AC and AC+DC • Wide AC Frequency bandwidth from 10Hz to 100kHz * • True-RMS or MEAN value detection mode can be selected * • Fast Peak Hold response time of 250µs • Low-pass filter for motor drive measurements... Digital Multimeters
Kyoritsu 1012 True RMS can measure and indicate distorted waveforms • 6040 counts with Bar Graph display • MIN/MAX function enables to record min & max value • REL(relative value) function to indicate the measurement variation Digital Multimeters
Kyoritsu 1011 Temperature measurement, selectable for ºC and ºF • 6040 counts with Bar Graph display • MIN/MAX function enables to record min & max value • REL(relative value) function to indicate the measurement variation Digital Multimeters
Kyoritsu 1030 Compact in Size, Light in Weight and Simple in Use. • Double moulding provides comfortable and good feeling in hand. • Penlight illuminates brightly the point to be measured, even in dark place. • Backlight LCD is highly visible, even in darkness. • Unique wrapping mechanism for test lead in the rear side compartment. • Unique protection mechanism for the test prod for safety. • All ranges including Ohm range are protected against overload... Digital Multimeters
Kyoritsu 1018 (Soft case type) / 1018H (Hard case type) Display : 4000 counts. • Auto range. • Diode test feature. • Capacitance test feature. • Continuity test. Digital Multimeters
Kyoritsu 1009 Display : 4000 counts. • Auto range and manual range selector provided.(with range hold feature) • Resistance range provides audible continuity test. • Automatically turns power off in about 30 minutes to conserve battery life. • Direct current measurement up to 10A AC and DC. • With Holster. Digital Multimeters
Kyoritsu 1109S Mirrored scale for easy and accurate reading. • Output terminal to cut off DC component when measuring AC voltage. • Safety designed input terminals and test leads. Analogue Multimeters
Kyoritsu 1110 High sensitivity DC20kΩ/V. • 1m drop-proof heavy duty designed taut-band movement. • Can measure line voltage up to AC 600V.(Voltage to ground MAX AC300V) (Protected by 600V ceramic fuse against accidental overload) • Continuity buzzer, battery check, LED check, temperature measurement function. • Skeleton type robust and clear case with carrying handle furnished as standard accessory. Analogue Multimeters
Kyoritsu 2500 0.01mA resolution for DC current • Top class measurement 0.2% accuracy • Φ6mm clamp jaw easy to use in tight places • Measurement from 0.01mA to 120.0mA • Dual display with backlight shows both mA measurement and percent of 4-20 mA span • Spotlight for illuminating measurement point • Analog output terminal for recorder connection • Complies with IEC 61010-1 CAT.II 300V DC Milliamp Clamp Meter
Kyoritsu 2002PA Can measure large AC current up to 2000A. • Peak hold function. • 55mm-dia large tear drop shaped jaws.   AC Digital Clamp Meters
Kyoritsu 2002R Can measure large AC current up to 2000A. • Peak hold function. • 55mm-dia large tear drop shaped jaws.   AC Digital Clamp Meters
Kyoritsu 2006 Pocket size, handy clamp meter. • UL listed fire retardant plastic housing case. • Multifunction instrument having voltage and resistance measurement functions in addition to all the ranges incorporated.   AC Digital Clamp Meters
Kyoritsu 2007A Sleep function to save battery • Data hold function. • Digital display with maximum 4000 counts.   AC Digital Clamp Meters
Kyoritsu 2017 Tear drop shaped jaws for ease of use in tight places and crowded cable areas. • Designed to meet internationally proven safety standards such as IEC 61010-1, UL3111 and VDE0411. • Three functions in one unit; AC current, AC voltage and resistance. • Resistance range provides audible continuity test. • Frequency response from 40Hz to 1kHz on AC current and voltage ranges.   AC Digital Clamp Meters