|
DKK-TOA GSS‐304B(KCl Replenish-Free) / GSS‐314B(KCl Refillable)
|
|
Easy-to-replace electrode tip and reference electrode junction tip
Alkali-resistant glass tips and hydrofluoric-acid-resistant glass tips available
KCl non-refillable type for wastewater treatment; KCl refillable type for processes
Selection of electrode holder: immersion type, drop-in type and flow-through type
Meas. range
pH: 0 - 14
|
Exchangeable Tip pH Electrode
|
|
|
DKK-TOA PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
|
|
Exchangeable Tip ORP Electrode PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
asy-to-replace electrode tip and reference electrode junction tip
Platinum electrodes (PSS) and gold electrodes (ASS) available
KCl non-refillable type is ideal for wastewater treatment; KCl refillable type for processes
Selection of electrode holder: immersion type, drop-in type and flow-through type
Meas. range
ORP: -2000 - +2000 mV |
Exchangeable Tip pH Electrode
|
|
|
DKK-TOA HC-7 Series
|
|
Ideal for pH/ORP measurements in tanks and open water applications
Assemble electrodes available: 5600 (KCl refillable type); 5910 (KCl replenish-free type)
Mounting flanges for tanks available (50A, 100A, 150A)
|
Immersion Type pH/ORP Detector
|
|
|
DKK-TOA HC-8Series
|
|
Designed for pH/ORP measurements in closed loop lines and environments where process pressure exists, such as pipes or sealed tanks and etc.
Assemble electrodes available: 5610(KCl refillable type); 5910(KCl replenish-free type)
|
Flow-Through Type pH/ORP Detector
|
|
|
DKK-TOA HC-64
|
|
Ideal for pure water measurements like boiler water (low electric conductivity)
Low flow injection of sampling allows for accurate measurement
Assemble electrodes available: MG-511-2F (glass electrode) 4164-2F (reference electrode) 6149-2F (temperature compensation electrode)
|
pH Sensor for Pure Water Measurement
|
|
|
DKK-TOA LHC-7D
|
|
Electrode Holder with Lift Up Type Jet Cleaner LHC-7D
A detector which can lift up from the sample water and remove fouling from the pH/ORP electrode effectively.
Automatic cleaning system that applies alternate streams of wash water and chemical solution (such as a 5% hydrochloric acid solution) to clean the pH/ORP detector.
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA UHC-7C / UHC-8C
|
|
Flow-Through Type Detector with Ultrasonic Cleaner UHC-7C / UHC-8C
Detectors composed of holder and ultrasonic cleaner: Immersion type (UHC-7C) and flow-through type (UHC-8C)
One-touch detachable holder enables quick calibration and easy maintenance
Compatible with GSS series
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA JHC-7C/JHC-8C
|
|
Immersion Type Detector with Water Jet Cleaner JHC-7C/JHC-8C
Detectors composed of holder and water-jet cleaner: Immersion type(JHC-7C) and flow-through type(JHC-8C)
By spraying water onto the tip of electrode, the water pressure washes fouling away
One-touch detachable holder and easy maintenance
Simple installation with a sensor, timer&electromagnetic valve integrated unit
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA BHC-7C
|
|
Immersion Type pH/ORP Detector with Brush Cleaner BHC-7C
Immersion type pH/ORP electrode holder with cleaning brush (BHC-7C)
The swing movements wash the electrode tip and prevent it from fouling
One-touch detachable holder and easy maintenance
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA RHC-7C / RHC-7EC
|
|
Immersion Type Detector with Chemical Cleaner RHC-7C / RHC-7EC
Immersion type electrode holder combined with chemical cleaning system
By spraying mixed air&cleaning agents onto the electrode tip it dissolves fouling away
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA MAC-355
|
|
pH Meter with Auto Calibration MAC-355
Automatic cleaning and 2-point calibration functions serve long-term reliable pH measurement with just little maintenance
Lift-up type design incorporated with air jet cleaning allows for superior cleaning effect and stable measurement
Self-diagnosis and useful message display
Meas. range
pH: -1 - 15
|
pH Meter with Auto-Calibration/Chemical Cleaner
|
|
|
DKK-TOA PAC‐R7
|
|
pH Meter with Chemical Cleaner PAC‐R7
Easy installation as equipments are previously set on the hold stand
Designed for long-term, continuous and highly reliable pH measurement in wastewater treatment facilities
Including mounting brackets
Meas. range
pH: -1 - 15 -5 - 100℃
|
pH Meter with Auto-Calibration/Chemical Cleaner
|
|
|
DKK-TOA SHBM-161 / 163 (2-wire)
|
|
Compact diecast aluminum enclosure
ExiallCT4 (combined with a Zener Barrier) explosion-proof and IP65 conformed enclosure
Easy calibration done with standard solution
Auto-detection of electrodes deterioration
Alterable output range
Meas. range
SHBM-161: pH; -1 - 15 SHBM-163: ORP; -2000 - +2000 mV
|
Intrinsically Safe Explosion-Proof Type Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA ELP-005/006/007 ELP-045/046/047/048
|
|
Suitable for bio-process tanks (fermentation tanks). KCl non-refillable and leadless type. Steam sterilizable, strong glass membrane, lead-free safe design
Two types available: Liquid junctions of both pressurized gel type products (ELP-005/006/007) and double junction type products (ELP-045/046/047/048)
Various electrode lengths available according to various tank sizes
Meas. range
pH: 0 - 14
|
pH Sensor for Bio-Process Applications
|
|
|
DKK-TOA HM-30P / 31P
|
|
Standard model for pH measurement (HM-30P)
Sophisticated type, capable of pH and ORP measurements (HM-31P)
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
Meas. range
pH 0 - 14 (HM-30P/31P) 0 - 100.0 degrees C (HM-30P/31P) 0 - ±2000 mV (HM-31P) (ORP electrodes sold separately) |
Handheld pH/ORP Meter
|
|
|
DKK-TOA RM-30P
|
|
Handheld ORP Meter RM-30P
Dedicated model for ORP measurement
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
Meas. range
0 - ±2000 mV 0 - 100.0 degrees C |
Handheld pH/ORP Meter
|
|
|
DKK-TOA WM-32EP
|
|
2-channel type, simultaneous measurement and display of pH/conductivity
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
PC and external printer connectable
Measurement items
pH, ORP, conductivity, resistivity, salinity, temperature (ORP electrodes sold separately) |
Handheld Electrical Conductivity/pH Meter
|
|
|
DKK-TOA IM-32P
|
|
2-channel type, simultaneous measurement and display of pH/ions
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
PC and external printer connectable
Measurement items
pH, ORP, ions, temperature (ORP and ion electrodes sold separately) |
Handheld Ion/pH Meter
|
|
|
DKK-TOA DM-32P
|
|
2-channel type, simultaneous measurement and display of DO/pH
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
PC and external printer connectable
Measurement items
pH, ORP, DO, temperature (ORP electrodes sold separately) |
Handheld DO/pH Meter
|
|
|
DKK-TOA CM-31P(for standard use) / CM-31P-W(for pure water)
|
|
Display of salinity (NaCl) is available (CM-31P)
Highly accurate measurement in pure water attainable with the pure water temperature compensation function (CM-31P-W)
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Meas. range (when using a standard cell)
0.1 mS/m - 10 S/m 0.1 Ω·m - 10k Ω·m Salinity: 0 - 4.00% 0 - 80℃ |
Handheld Electrical Conductivity Meter
|
|