|
Megger DETEX Phasing Detectors
|
|
Five Models
Grounded or ungrounded AC system check
Model 510836-1 provides Bright LED indication
|
Megger
|
|
|
Megger DETEX Phasing Detectors-2
|
|
Five Models
Grounded or ungrounded AC system check
Model 510836-1 provides Bright LED indication
|
Megger
|
|
|
Megger 550005B Transformer Turns Ratio Test Set
|
|
Used for testing single phase power and distribution transformers
Design based on precision bridge measuring technique
Available in hand-cranked or line-operated models
Unmatched accuracy (±0.1%) in a portable design
|
Megger
|
|
|
Megger 560060 and 560400 Phase and Motor Rotation Testers
|
|
Complete phase-sequence and motor-rotation testing in one instrument
Ensures correct phase hookup in one easy test
Rugged and portable tester
Performs additional polarity and continuity checks
Motor and Phase Rotation Tester permits the electrical contractor or industrial maintenance electrician to permanently connect and tape the terminals of the motor being installed, without having to first energize the motor by a temporary hookup from a power source, if available, to determine... |
Megger
|
|
|
Megger 569001 Ultrasonic Leak / Corona Detector
|
|
Features compact long-distance directional pickup
Locates gas leaks and corona within inches of the source
Lightweight for easy use, even in remote field locations
Insensitive to high ambient audible noise levels
|
Megger
|
|
|
Megger 656601 Energized Cable Route Tracer
|
|
Locates and traces cables energized with 50/60 Hertz
Three-way swivel detector also measures cable depth
Two sensitivity ranges enable tracing of cables as much as 8 ft deep
Peak and null location methods
Lightweight, battery operated
|
Megger
|
|
|
Megger 656621 AccuTrace® Cable Route Tracer
|
|
Peak and Null tracing capability
Traces and determines depth of any conductive line
Traces energized or de-energized lines through inductive or conductive coupling
Extremely lightweight receiver
|
Megger
|
|
|
Megger 656902 Split-Box Pipe and Cable Locator
|
|
Energized or de-energized line tracing
Conductive or Inductive coupling
Peak and null detection capabilities
Hand-held and lightweight
Solid construction for use in tough environment
|
Megger
|
|
|
Megger 830220-1 Cable Phase Rotation Meter
|
|
Safe - operates at low voltage
Measures system voltage
Measures capacitance of test point if systemvoltage is known
Checks phase rotation of cables
Phases out cables
Rugged; comes with portable case
Battery operated
Operates from potential test point of elbow connectors
|
Megger
|
|
|
Megger AVO300-US Auto-ranging Digital Multimeter
|
|
Designed for Electricians
Fully auto ranging
Large display characters
Separate battery and fuse cover
Data hold
IEC 61010 compliant
Suitable for applications to CATIII 600 V
|
Megger
|
|
|
Megger AVO310-US Auto-ranging Digital Multimeter
|
|
Designed for Electricians
Fully auto ranging
Large display characters
Separate battery and fuse cover
Data hold
Min/Max store
Backlight
IEC 61010 compliant
Suitable for applications to CATIII 600 V
|
Megger
|
|
|
Megger BD-59090 MOM2 MicroOhmmeter
|
|
Up to 220 A
Battery powered
Lightweight – 1 kg
Safe test – DualGround
Auto range: 1 μΩ to 1000 mΩ
Bluetooth PC communication
Complies with IEEE and IEC standards
Easy to use – Attach the Kelvin Clamps and press TEST button.
Active-duty and rugged design. All weather, all environment, all industry usage.
Truly handheld
Testing with both sides grounded
|
Megger
|
|
|
Megger BD-59092 MOM2 MicroOhmmeter
|
|
Up to 220 A
Battery powered
Lightweight – 1 kg
Safe test – DualGround
Auto range: 1 μΩ to 1000 mΩ
Bluetooth PC communication
Complies with IEEE and IEC standards
Easy to use – Attach the Kelvin Clamps and press TEST button.
Active-duty and rugged design. All weather, all environment, all industry usage.
Truly handheld
Testing with both sides grounded
|
Megger
|
|
|
Megger BITE3 Battery Impedance Tester
|
|
Determines health of lead-acid cells up to 2000 Ah
On-line testing with Pass/Warning/Fail calculations
Measures impedance, interconnection resistance and cell voltage
Windows CE operating system with 32 MB of memory
Measures float and ripple currents
Includes ProActiv Database Management Software
|
Megger
|
|
|
Megger BT51 Low Resistance Ohmmeter
|
|
High Test Current
Four Terminal Measurement
Two Measuring Ranges (2000 mΩ and 20,00 mΩ) and maximum resolution of 0,01 mΩ
Protected against inadvertent connection to the mains supply
The Megger BT51 Low Resistance Ohmmeter makes measurements by passing a current through the conductor under test and also monitoring the voltage across it. The test current is limited by a simple current limiting circuit and is measured by monitoring the voltage across a resistor. The test current is... |
Megger
|
|
|
Megger CFL510G Hand-held Time Domain Reflectometer
|
|
An AUTO selection option ensures that the most effective parameters are chosen, depending on the range required, aiding rapid diagnosis of the TDR trace
Dual cursors allow complete flexibility, giving the user full control and instant indication of distance between two points
A unique, easy one-button press and HOLD feature allows comparison between cable conditions
Extra high resolution, a white-light backlight, and grayscale tones gives a vibrant graphical display, useful in identifying... |
Megger
|
|
|
Megger CFL535FM (655535FM) TDR2000/2RM Dual Input Time Domain Reflectometer with Monochrome Display and Rechargeable Batteries
|
|
11 fault location modes
Dual Input and Output Ports
15 internal memory positions
RS-232 interface to a PC or Printer
5 User selectable pulse widths per range
20 km range at VF = 0.90
Large backlit LCD Display
Dual cursor measurement
Intermittent fault location
Output pulse amplitude and width control
"TX Null" technology
No blocking filter required
Trace averaging
Trace Master PC software included
Available in optional configurations:
CFL535FR - with color high resolution... |
Megger
|
|
|
Megger CFL535FR (655535FR) TDR2000/2R Dual Input Time Domain Reflectometer with Color Display and Rechargeable Batteries
|
|
11 fault location modes
Dual Input and Output Ports
15 internal memory positions
RS-232 interface to a PC or Printer
5 User selectable pulse widths per range
20 km range at VF = 0.90
Dual cursor measurement
Intermittent fault location
Output pulse amplitude and width control
"TX Null" technology
No blocking filter required
Trace averaging
Trace Master PC software included
Available in optional configurations:
CFL535FM - with backlit monochrome display and powered by NiMH cell... |
Megger
|
|
|
Megger DCM300E Leakage Clampmeter
|
|
0.01 mA resolution
EMC and EN1010-2-32 compliance
30 mA, 300 mA, 30 A and 300 A range
40 mm jaw size
Analog Bargraph & Digital Display
|
Megger
|
|
|
Megger DCM310 400A AC Digital Clamp Meter
|
|
Current only and multimeter models
Measures up to 400 A AC with low current ranges for improved resolution
Data Hold
Max Hold
Small pocket-size design
Exceptional battery lifetime
Supplied with carry case
IEC61010 CAT III 600 V
|
Megger
|
|