Hioki

  • Filter
  Name SKU Description Category
Hioki X-Y in-Circuit HiTester 1240-01/-02/-03 Detection of IC lead pseudo-contact (poor contact) states • High-speed testing at up to 0.025 sec./step (1240-01, 1240-03) • Detection of IC lead float and pseudo-contact states • Support for active testing (optional feature) • High-precision probing • Large testing area of 510 × 460 mm (1240-01, 1240-02) • Standard transport capability • Automatic alignment function and simple visual test function Populated Board Testing
Hioki In-Circuit HiTester 1220-50/-51/-52 High Performance Populated Board Testing with Expansion Capabilities In populated board production settings where improving productivity is key, even small time losses are unacceptable. The 1220 series provide a single solution for jobs that previously required multiple measuring instruments, featuring a compact PCI bus that delivers a dramatic speed boost of 150%. Populated Board Testing
Hioki Fit-Line Inspection Data Creation System UA1780 Data Creation System Delivers 90% Faster Data Generation, 93% Lower Line Stoppage Times The UA1780 enables high-quality test programs in a short period of time by using net information that has been reverse-generated from Gerber data and component information libraries, and delivers maximum performance when used in conjunction with Hioki’s new FA1240-50 flying probe tester. Populated Board Testing
Hioki X-Y Board HiTester 1270, 1271 Double-sided Board Tester with Maximum Measurement Speed of 0.012s/Step The 1270 and 1271 are fixtureless, dual-sided, bare board testers that provide superior cost performance. Using a total of four arms, two in front and two in back, it is capable of simultaneously testing both sides of an optional board, and is available with a4-terminal resistance measurement function that enables measurement of very small resistances in IVH or through holes. Testable board dimensions (1270): 50 × 50... Bare Board Testing
Hioki X-Y C HiTester 1116 Series 100 Steps/Second Ultra-High Speed Board Pattern Inspection System The 1116 Series are high-speed substrate testers that use capacitance testing to greatly reduce the number of testing steps and time required compared to the continuity testing method. They support ordinary bare boards to high-density BGA, CSP, or MCM packages, as well as flexible boards. 1116-71 (Offline type) 1116-72 (Single-robot transport) 1116-73 (Offline, with 1945-21 and 1945-22) 1116-74 (Single-robot transport, with... Bare Board Testing
Hioki Bare Board HiTester 1230 All-In-One Solution for Testing the Reliability of Connections on Printed Circuit Boards The 1230 is a bare board tester with the testing capabilities of an in-circuit tester, delivering highly consistent low-resistance measurements with high speed high precision. Bare Board Testing
Hioki Bare Board HiTester 1232-11 High-Precision Batch Fixture-Type Testing System that Support Boards with Embedded Passive and Active Devices The 1231-11 is a bare board tester that utilizes the full range of Hioki’s in-circuit testing technologies to deliver LSI reliability testing, complex component separation testing, high continuity and insulation testing, and more. Bare Board Testing
Hioki Bare Board HiTester 1236-11 Super-High-Speed Testing System for Boards with Embedded Passive and Active Devices Utilizing the Index Table Method The 1236-11 is a bare board test system that harnesses Hioki’s populated board testing technology and includes support for next-generation boards with embedded passive and active devices. It features mass-production capabilities that uses test heads (test fixtures) to test fine pitch boards. Bare Board Testing
Hioki Bare Board HiTester 1231-11 Semiconductor Package Board Testing System Utilizing Index Table Method The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. Bare Board Testing
Hioki External Shunt HS-1 series Expand current range use with the 50 mV full scale meter (50/60 Hz, 0.5 % class) • Use in combination with a 50 mV meter • 30A to 300A Meter Relays
Hioki Current Transformer CT-5MRN Series Current Transformer in 1.0% Class to Expand the Input Range of Meter Relays The CT-5MRN is a current transformer that expands the input range of Hioki meter relays. Not CE Marked CT-5MRN100: 100A primary, 5A secondary CT-5MRN120: 120A primary, 5A secondary CT-5MRN150: 150A primary, 5A secondary Meter Relays
Hioki Meter Relay 2104H/L/HL Meter Relays in ±1.5% Class with 1 µA, 10 mV DC Movement for Power Saving Measures and Automation Hioki Meter Relays are industrial 1-channel devices to assist in energy saving and automation implementations. The 2104 series are 1-channel ±1.5% class meter relays featuring a sensitive 1 µA, 10 mV DC movement and a customizable scale. Not CE Marked • 2104H: Lamp lights up and output relay contact operates at deflection of the needle to the right of the setting needle • 2104L: Lamp... Meter Relays
Hioki Meter Relay 2103H/L/HL Meter Relays in ±2.5% Class with 1 µA, 10 mV DC Movement for Power Saving Measures and Automation Hioki Meter Relays are industrial 1-channel devices to assist in energy saving and automation implementations. The 2103 series are 1-channel ±2.5% class meter relays featuring a sensitive 1 µA, 10 mV DC movement and a customizable scale. • 2103H: Lamp lights up and output relay contact operates at deflection of the needle to the right of the setting needle • 2103L: Lamp lights up and... Meter Relays
Hioki Lan Cable HiTester 3665-20 LAN Cable Tester for Shielded and Unshielded Twisted Pair Cables The 3665-20 is a hand-held LAN cable tester to easily test wiremap, measure cable length and identify twisted-pair cables, and is useful for verifying connections after installing connectors on cables. Optional terminators that facilitate easy identification of multiple cables make the LAN cable tester especially convenient for testing cables in working networks in the event of faults caused by open- or short-circuited cable... Network | LAN | Optical Power | Noise Testers
Hioki Optical Power Meter 3664 Test the Optical Power Integrity of Laser and LED Equipment The 3664 is an optical power meter for measuring the optical power of a spatial light. It is ideal for testing the optical power of a laser light source and an LED light source. The optional optical sensors for the power meter are interchangeable and their sensitivity can be adjusted independently. *This product cannot perform measurement alone. Please purchase an optional light sensor separately. *Use of Optical Sensor 9743/... Network | LAN | Optical Power | Noise Testers
Hioki LED OpticalL Meter TM6101 Wide 100 lx to 100,000 lx Range LED Optical Meter for Testing LED Optical Characteristics The TM6101 is an optical characteristic measuring instrument geared for the production lines of white LED and LED lighting devices. Based on Hioki’s proprietary filter spectroscopic measurement method, the LED optical meter measures optical characteristics such as luminous intensity, chromaticity and color rendering index of white LEDs with ultra high accuracy and offers a faster speed of measurement... Network | LAN | Optical Power | Noise Testers
Hioki Phase Detector 3126-01 Classic Phase Rotation Detector The Hioki 3126-10 is a phase rotation detector with 110V to 480V detection range. Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors
Hioki Phase Detector 3129 Non-Metallic Contact 70V to 600V Phase Detector Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model 3129 is a non-contact phase detector that can detect the phase of electrical current flow within insulated wires without the use of metallic contact voltage... Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors
Hioki Phase Detector 3129-10 Non-Metallic Contact 70V to 1000V Phase Detector Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model 3129-10 is a non-contact phase detector that detects the phase of electrical current flow within insulated wires without the use of metallic contact voltage... Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors
Hioki Voltage Detector 3120 Non-Metallic Contact Voltage Detector with Battery Life Indicator Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3120 is a non-metallic contact voltage detector with a power switch that also gives a clear indication of the battery state with a green LED. When voltage is detected, the LED lights red along with an audio signal. Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors