Detect the presence of voltage or relay contact signals with Memory HiCorders at high-speeds
The 9327 is a high-speed, 4-channel logic probe used to detect voltage or relay contact signals with Hioki Memory HiCorders.
Connects to the logic input terminals of Hioki Memory HiCorders. Check the size of the terminal before purchase.
Detect Hi/Lo voltage or relay contact signals
• 4 channels with common ground
• Switch between digital or contact input
• 3 thresholds for digital input (+1.4/+2.5/+4.0V)
• Supports pulse widths as narrow as 100ns using high speed response
• Miniature connector
Basic specifications (Accuracy guaranteed for 1 year)
Note: The unit-side plug is miniature terminal type
Function | Detection of voltage signal or relay contact signal for High/Low state recording |
---|---|
Input | 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detect open-collector signals) Input resistance: 1 MΩ (with digital input, 0 to +5 V) 500 kΩ or more (with digital input, +5 to +50V) Pull-up resistance: 2 kΩ (contact input: internally pulled up to +5 V) |
Digital input threshold | 1.4V/ 2.5V/ 4.0V |
Contact input detection resistance | 1.4 V: 1.5 kΩ or higher (open) and 500 Ω or lower (short) 2.5 V: 3.5 kΩ or higher (open) and 1.5 kΩ or lower (short) 4.0 V: 25 kΩ or higher (open) and 8 kΩ or lower (short) |
Response pulse width | 100 ns or more |
Max. allowable input | 0 to +50V DC (the maximum voltage that can be applied across input pins without damage) |
Dimensions and mass | 62 mm (2.44 in)W × 94 mm (3.70 in)H × 20 mm (0.79 in)D, 150 g (5.3 oz), Main unit cable 1.5 m (4.92 ft), input section cable 300 mm (0.98 ft) |
Accessories | IC clip leads ×1, Alligator clip leads ×1, Carrying case ×1, Instruction Manual ×1 |