|
Fluke Amprobe GSD600 Gas Leak Detector for Methane and Propane
|
|
Detects Methane and Propane gas
Quickly identifies and pinpoints gas leaks
Automatic calibration feature
5 level LED alarm: >40, >80, >160, >320, and >640 ppm
Built-in earphone jack with mute function (earphone not included)
Flexible probe to access difficult measurement areas
Auto Power Off
|
Energy Assessment Kits
|
|
|
Fluke Amprobe LM120 Digital Light Meter with Auto Ranging
|
|
Measure in Lux or Footcandles, front panel switchable
Measuring Range to 200,000 Lux or 20,000 Foot candles
Silicon photodiode sensor and filter
Data Hold to freeze reading on the digital display
MIN / MAX ability to show high and low readings
Autoranging plus Manual Range
Zero function to null display before a reading
Auto Power Off to save battery life
Includes protective sensor cap
Large, 3-1/2 digit display
|
Energy Assessment Kits
|
|
|
Fluke Amprobe ULD-300 and TMULD-300 Ultrasonic Leak Detectors
|
|
ULD-300
Locates arcing in a electrical system
Useful in finding the ends of buried PVC pipes
Detects any pressurized gas leak regardless of type CFC's, HFC's Nitrogen, etc. (unaffected by contaminants)
TMULD-300 (ULD-300 with UT-300 Transmitter)
Has same features as ULD-300
Transmitter "pressurizes" area with ultrasonic sound enabling the ULD-300 to pinpoint leaks (used in areas where gas is not sufficiently pressurized)
Applications include air tightness of cars or houses
|
Energy Assessment Kits
|
|
|
Fluke Amprobe ELS2A ELS2 AC Line Splitter
|
|
Measures current without splitting AC line cords
Two measurement loops for increased sensitivity, X1 and X10
Built-in voltage measurement points to check for voltage sags and surges
Rated for 120V, 15Amps
|
Energy Assessment Kits
|
|
|
Fluke 287/FVF FlukeView Forms Combo Kit
|
|
Save when you buy the Fluke 287 Logging Multimeter with TrendCapture and FlukeView® Forms software together!
The FlukeView Forms Combination Kit comes standard with: - Fluke-287 True-RMS Electronics Logging Multimeter with TrendCapture - FlukeView Forms Software and cable - 80BK-A thermocouple Probe - CAT III 1000 V 10 A Modular test leads (red, black) - CAT III 1000 V 10 A Modular test probes (red, black) - CAT II 300 V 5 A Alligator Clips (red, black) - Soft case for meter... |
Energy Assessment Kits
|
|
|
Fluke Ti10 Thermal Imager
|
|
Enhanced problem detection and analysis capabilities with IR-Fusion® Technology.
Optimized for field use in harsh work environments.
Engineered and tested to withstand a 2 m (6.5 ft) drop
Withstands dust and water—tested to an IP54 rating.
Delivers the clear, crisp images needed to find problems fast.
Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD).
Intuitive, three-button menu is easy to use—simply navigate with... |
Energy Assessment Kits
|
|
|
Fluke 1735 3-Phase Power Logger
|
|
Record power and associated parameters for up to 45 days
Monitor maximum power demand over user-defined averaging periods
Prove the benefit of efficiency improvements with energy consumption tests
Measure harmonic distortion caused by electronic loads
Improve reliability by capturing voltage dips and swells from load switching
Easily confirm instrument setup with color display of waveforms and trends
Measure all three phases and neutral with included 4 flexible current probes
View... |
Energy Assessment Kits
|
|
|
Fluke 62 Mini Infrared Thermometer Discontinued
|
|
Single point laser sighting
Wide temperature range from -30º to 500ºC (–20º to 932ºF)
Best accuracy in its class: + 1% of reading
Holds temperature readings for 7 seconds
Dual displays shows current and MAX measurements simultaneously
Backlit display for poorly lit areas
Comfortable ergonomic handle with protective rubber boot for added durability
Robust, award winning design
Includes soft carrying case
2 Year Warranty
|
Energy Assessment Kits
|
|
|
Fluke 971 Temperature Humidity Meter
|
|
Backlit dual display of humidity and temperature
Measures dew point and wet bulb temperatures
99 record storage capacity
Ergonomic design with belt clip and protective holster
Quick-response capacitance sensor with twist-open protective cover
Compact and lightweight (188 g/6.6 oz)
Temperature range from -20 °C to 60 °C (-4°F to 140 °F)
Relative humidity from 5 % to 95 %
Min/Max/Avg Data hold
Low battery indicator
|
Energy Assessment Kits
|
|
|
Fluke 271 DDS Function Generator with ARB
|
|
High stability 10 MHz DDS function generator
Arbitrary capability with storage for five user defined waveforms
Multiple standard and complex waveforms recalled from internal memory
Extensive modulation capabilities include sweep, AM, Gating, Trigger/Burst, FSK and Hop
GPIB and RS-232 interfaces
|
Function Generators
|
|
|
Fluke 27 Extra Rugged Analog/Digital Multimeter
|
|
3200-count digital display for accuracy and resolution
31-segment analog bar graph for fast peaking, nulling zero adjustments and capacitor checking.
Fast Auto and Manual Ranging
TouchHold® function captures and locks the measurement and automatically updates with the next measurement
Conductance for high resistance measurement
Min/Max and Relative Modes
Conforms to IEC 1010-1 CAT III
Meets Military Shock, Vibration and Water-Proof Requirements
AC & DC Voltage
Diode Test
Fast... |
Fuses
|
|
|
Fluke 77-IV Industrial Digital Multimeter
|
|
Large display
Backlight for work in dim areas
Min / Max to record signal fluctuations
Ergonomic overmolded housing with integrated probe holders
Free your hands with the optional TPAK magnetic hanger
Auto and Manual ranging
Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
Free your hands with the optional TPAK magnetic hanger
|
Fuses
|
|
|
Fluke 87V Digital Multimeter and 87V/E2 Industrial Electrician Combo Kit
|
|
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87-5, 87-5/E2 Kit)
True-rms ac voltage and current for accurate measurements on non linear signals (87-5, 87-5/E2 Kit)
Built in thermometer (87-5, 87-5/E2 Kit)
Measure up to 1000 V AC and DC
Measure up to 10 A (20 A for 30 seconds)
10,000 uF capacitance range
Frequency to 200 kHz and % duty cycle
Peak capture to record transients as fast as 250 μs... |
Fuses
|
|
|
Fluke 110, 111, 112 Digital Multimeters, Discontinued
|
|
True-rms ac voltage and current for accurate readings on all waveforms
6000 count display provides improved resolution
Min/Max/Average recording
Frequency, capacitance & resistance capabilities
Model 112 has a backlight to illuminate the screen in dark workspaces
Easy access battery door to change the battery without breaking the calibration seal
Drop protected to 1 meter
Holster with probe holders for better test lead management
Compatible with ToolPak™ meter hanging... |
Fuses
|
|
|
Fluke 175 True RMS Digital Multimeter
|
|
Lifetime Warranty
6000 Count Display Provides Better Resolution
0.15% Basic DC Accuracy
True-rms AC Voltage and Current Measurement for Accurate Readings on all Waveforms
Min/Max/Average Records Irregular Activity
Auto and Manual Hold
Frequency, Capacitance and Resistance Capabilities
IEC 1010 CAT IV 600V, CAT III 1000V Safety Ratings
|
Fuses
|
|
|
Fluke 177 True RMS Digital Multimeter
|
|
Lifetime Warranty
6000 Count Display Provides Better Resolution
0.9% Basic DC Accuracy
True-rms AC Voltage and Current Measurement for Accurate Readings on all Waveforms
Min/Max/Average Records Irregular Activity
Auto and Manual Hold
Frequency, Capacitance and Resistance Capabilities
IEC 1010 CAT IV 600V, CAT III 1000V Safety Ratings
|
Fuses
|
|
|
Fluke 179 True RMS Digital Multimeter with 80BK Temperature Probe
|
|
Lifetime Warranty
6000 Count Display Provides Better Resolution
0.9% Basic DC Accuracy
True-rms AC Voltage and Current Measurement for Accurate Readings on all Waveforms
Min/Max/Average Records Irregular Activity
Auto and Manual Hold
Frequency, Capacitance and Resistance Capabilities
Backlight to Illuminate the Screen in Dark Workspaces
Measures Temperature in °C and °F (Thermocouple Included)
IEC 1010 CAT IV 600V, CAT III 1000V Safety Ratings
|
Fuses
|
|
|
Fluke 187, Fluke 189 and Fluke 189/FVF2 Kit True-rms Digital Multimeters Discontinued
|
|
Basic DC accuracy of 0.025% at 50,000-counts
True-RMS AC, AC+DC, dBm, dBV
100 kHz AC bandwidth
Frequency Counter 0.5 Hz - 1 MHz
Capacitance 0.0 1nF - 50 mF
Duty cycle and pulse width measurements
Multiple reading display with bargraph and two-level backlight
Temperature readings in C or F using optional K-type thermocouple adapter (80AK) and probe
MIN/MAX/AVERAGE with real-time timestamp values in real-time
250 µS Fast MIN/MAX for peak transient capture
Document, store and analyze... |
Fuses
|
|
|
Fluke 1621 Earth Ground Testers
|
|
3-pole Fall-of-Potential earth testing for basic measurements
2-pole resistance measurements for added versatility
Easily capture values with single-button operation
Ensure accurate measurements with automatic 'noise' voltage detection
Hazardous voltage warning offers increased user protection
Clearly read and record data with a large, backlit display
Rugged holster and design for tough work environments
Portable size allows for easy transportation
Instantly be alerted to measurements... |
Ground Testers
|
|
|
Fluke 1623 GEO Earth Ground Tester - Basic
|
|
One-button measurement concept
3 - and 4-pole earth ground measurement
4-Pole soil resistivity testing
2-pole resistance measurement AC
Selective testing, no disconnection of ground conductor (1 clamp)
Stakeless testing, quick ground loop testing (2 clamps)
Measuring frequency 128 Hz
For advanced model See Fluke 1625
|
Ground Testers
|
|