|
Fluke 789 ProcessMeter
|
|
24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
100 % larger dual display
1,200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
0-100 % mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003)
Externally accessible fuses for easy replacement
DMM designed to meet 1000 volt IEC 1010 CAT III standards
Precision 1000 V, 440 mA... |
Calibrators
|
|
|
Fluke 787 ProcessMeter™
|
|
DMM and loop calibrator in one tool
Precision 1000V, 440 mA digital multimeter
Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency
0.1% dc voltage accuracy
0.05% dc current accuracy, 1 A resolution to 30 mA
Simultaneous mA and % of scale readout
True rms ac voltage measurement to 1 kHz
Frequency measurement to 20 kHz
Min/Max/Average/TouchHold/Relative modes
Diode test and continuity beeper
DC current source/loop calibrator
20 mA current... |
Calibrators
|
|
|
Fluke 773 Milliamp Process Clamp Meter
|
|
DC voltage measurement to verify 24 V power supplies or voltage I/O signals
Source DC voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop
mA in/out: simultaneously measure the mA signal with the clamp and source a mA... |
Calibrators
|
|
|
Fluke 772 Milliamp Process Clamp Meter
|
|
Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clamp meter
Source 4 to 20 mA signals for testing control system I/O or I/Ps
Simulate 4 to 20 mA signals for testing control system I/O
Measure 4 to 20 mA signals with in-circuit measurement
Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters
Source mA output signals in a linear ramp or 25 % step output– Automatically... |
Calibrators
|
|
|
Fluke 771 Milliamp Process Clamp Meter
|
|
Measure mA signals for PLC and control system analog I/O
Measure 4 to 20 mA output signals from transmitters without breaking the loop
Best in class 0.2 % accuracy
Resolution and sensitivity to 0.01 mA
Hold function captures and displays changing measurements
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations... |
Calibrators
|
|
|
Fluke 753 Handheld Multi-Function Process Calibrator
|
|
Multi-Function
Calibrate temperature, pressure, voltage, current, resistance, and frequency
Records and documents results
Supports ISO-9000 or regulatory standards by capturing calibration results
The USB interface lets users transfer the results to a PC
Supports popular instrumentation management SW: The 753 works with the Fluke DPCTrack 2 software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others
Three... |
Calibrators
|
|
|
Fluke 7526A Precision Process Calibrator
|
|
Sources and measures dc voltage, current, resistance, RTDs and thermocouples
Precision pressure measurement using Fluke 700 or 525A-P series pressure modules
Includes 24 V dc transmitter loop power supply
Measures 4-20 mA loop current
Includes automated switch-test function
Accepts ITS-90 coefficients for accurate SPRT measurements
Compatible with MET/CAL Calibration Software
|
Calibrators
|
|
|
Fluke 726 Precision Multifunction Process Calibrator
|
|
More precise measurement and calibration source performance, accuracies of 0.01%
Transmitter error% calculation, interpret calibration results without a calculator
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Frequency totalizer and frequency pulse train source mode for enhanced flow meter testing
HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
Integrated pressure... |
Calibrators
|
|
|
Fluke 725EX Multifunction Process Calibrator
|
|
Support flow meter testing with frequency and CPM functions
Perform fast linearity tests with auto- step and auto-ramp features
Power transmitters during test using loop supply with simultaneous mA measurement
Store frequently used test setups for later use
Backlight lets you work in poor light
Large battery capacity of four AA cells
Battery door for easy changes
Also available Fluke 725EX Intrinsically safe model
|
Calibrators
|
|
|
Fluke 725 Multifunction Process Calibrator
|
|
Support flow meter testing with frequency and CPM functions
Perform fast linearity tests with auto- step and auto-ramp features
Power transmitters during test using loop supply with simultaneous mA measurement
Store frequently used test setups for later use
Backlight lets you work in poor light
Large battery capacity of four AA cells
Battery door for easy changes
Also available Fluke 725EX Intrinsically safe model
|
Calibrators
|
|
|
Fluke 724 Temperature Calibrator
|
|
Easy to read dual display lets you view input and output simultaneously
Measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters
Source/simulate thermocouples, RTDs, volts, and ohms to calibrate transmitters
Perform fast linearity tests with 25% and 100% steps
Execute remote tests with auto step and auto ramp
Power transmitters during test using loop power supply with simultaneous mA measurement
Store frequently-used test setups for later use
Compact, streamlined... |
Calibrators
|
|
|
Fluke 721 Dual Precision Pressure Calibrator
|
|
Two isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy
14 available pressure range configurations standard
Temperature-compensation ensures accuracy in field applications
External pressure module connection supports all pressure modules (29 ranges) for even more measurement capability
Pt100 RTD input for temperature measurement, accurate to 0.1°C (0.2°F)
Requires 720RTD probe sold separately as an accessory
Measure 4-20 mA signals
Internal 24 V Loop Power... |
Calibrators
|
|
|
Fluke 719PRO Electric Pressure Calibrator with Backlit Display
|
|
Electric pump for one handed pressure calibration
Eliminate the need for a separate hand pump
Best in class pressure measurement uncertainty of 0.025%
Measure and source mA with best in class 0.015% accuracy
Precision pressure adjust vernier for accurate pressure calibration
Variable release rate bleed valve for easy pressure adjustment
Ideal performance for high accuracy transmitter calibration
30 PSI, 150 PSI and the long requested 300 psi (2, 10 and 20 bar) pressure... |
Calibrators
|
|
|
Fluke 719 Electric Pressure Calibrator
|
|
General Features:
Electric pump for one handed pressure calibration
Best in class pressure measurement uncertainty of 0.025 %
Measure and source mA with best in class 0.015 % accuracy
Precision pressure adjust vernier
Variable release rate bleed valve for easy pressure adjustment
Ideal performance for high accuracy transmitter calibration
30 PSI and 100 PSI pressure ranges
Programmable pump limit:
Eliminates over-pressurization
Allows the user to program target pressures for... |
Calibrators
|
|
|
Fluke 718EX-30, 718EX-100 and 718EX-300 Intrinsically Safe Pressure Calibrators
|
|
ATEX II 1G EEx ia IIC T4 Compliant
Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve
Pressure measurement to 0.05% of full span, using an internal pressure sensor
Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules
Wide range of selectable measurement units for pressure
Current measurement with 0.02% accuracy and 0.001 mA resolution
Pressure switch test function
Min-Max Hold functions
Simple, push-button... |
Calibrators
|
|
|
Fluke 717 and Fluke 718 Pressure Calibrators
|
|
General Features:
Measure pressure and vacuum to 0.05% of full scale with internal 30 or 100 psig sensor
1/8 NPT pressure fitting
Compatible with non-corrosive gasses and liquids
Measure pressure to 10,000 psi/69 mPa using one of 29 Fluke 700Pxx Pressure Modules
Measure mA with 0.025% accuracy and 0.001 mA resolution, while providing 24 volt loop power
New built-in pressure switch test feature
Min/Max/Hold functions
Fluke 718 Features:
Built-in pressure/vacuum hand pump,... |
Calibrators
|
|
|
Fluke 715 Volt/mA Loop Calibrator
|
|
Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
Measure voltage output process signals from PLCs, transmitters
Source or simulate 24 mA loop current
Source voltage to 100 mV or 10V
24V loop supply with simultaneous current measurement
Enhanced voltage and current measure and source accuracy
Improved battery life
250 ohm HART resistor with loop power
Holster features test lead storage
Compatible with toolpack magnetic... |
Calibrators
|
|
|
Fluke 714 Thermocouple Calibrator
|
|
Measure temperature from Thermocouple output
Simulate Thermocouple output
Operable with nine types of thermocouples
Calibrate linear Thermocouple transmitter with mV source function
Selectable °F or °C
Thermocouple mini-jack termination
|
Calibrators
|
|
|
Fluke 712 RTD Process Calibrator
|
|
Measure temperature from RTD output
Simulate RTD output
Operates with seven types of RTDs
Measure additional RTDs using Ohms measurement function
Simulate additional RTDs using Ohms source function
°F or °C selectable
Four shrouded banana jacks
Compatible with Rosemount® pulsed RTD transmitters(pulses > 100ms)
|
Calibrators
|
|
|
Fluke 707EX Intrinsically Safe Loop Calibrator
|
|
ATEX Intrinsic Safe Certification for use in classified areas.
Large display and simple, quick-click push rotary button for easy one-handed operation
Simultaneous mA and % readout for quick, easy, interpretation of readings
mA accuracy of 0.015 %, superior to other loop calibrators
1 µA resolution for mA source, simulate and measure
Push button with 25 % steps for fast, easy linearity checks
0-100 % "span check" for fast confirmation of zero and span
Selectable slow ramp, fast... |
Calibrators
|
|