|
Fluke TPAK ToolPak, Meter Hanging Kit
|
|
Kit includes: 9 inch hook and loop strap, universal hanger clip, hook hanger for non magnetic surfaces and a strong magnet.
Solves almost any hanging and positioning problem you may face.
The universal hanger allows you to hang your meter on nails, hooks and many other objects.
Compatible with many Fluke instruments.
One year warranty.
|
Cases and Holsters
|
|
|
Fluke 700-IV Current Shunt
|
|
Very accurate current shunt to use for verification and calibration of process control loops.
Can be used with accurate voltmeters for calibration purposes
Can be used with Fluke 74X series in mA/mA applications (74X will display mA/mA automatically) One year warranty
|
Connectors
|
|
|
Fluke 700-BCA Bar Code Adapter
|
|
Shielded four conductor cable terminated with a 9-socket D-subminiature connector and a 9-pin D-subminiature connector.
Provides interconnection and pin translation between a Fluke 743 Documenting Process Calibrator and a Hewlett Packard HBSW-8200 Bar Code Wand.
Overall length approximately 15 cm
One year warranty
|
Connectors
|
|
|
Fluke 700-BCW Bar Code Wand
|
|
This Hewlett Packard HBSW-8200 Bar Code Wand reads eight common bar code symbologies.
Code 39, Interleave 2 or 5, UPC A and E, EAN 8 and 13, Codabar, Code 128, Code 11, Code 93, and MSI Code.
Programmable via bar code labels or escape sequences. LED indicates when a bar code has been correctly decoded.
Resolution, 0.19 mm.
Usable from -20 °C to 65 °C, in ambient light to 100,00 lux.
EMI compliance per FCC part 15 Class B. ESD immunity, 25 kV.
Supports the scanned entry of... |
Connectors
|
|
|
Fluke 787CAL Calibration Module
|
|
This Hewlett Packard HBSW-8200 Bar Code Wand reads eight common bar code symbologies.
Code 39, Interleave 2 or 5, UPC A and E, EAN 8 and 13, Codabar, Code 128, Code 11, Code 93, and MSI Code.
Programmable via bar code labels or escape sequences. LED indicates when a bar code has been correctly decoded.
Resolution, 0.19 mm.
Usable from -20 °C to 65 °C, in ambient light to 100,00 lux.
EMI compliance per FCC part 15 Class B. ESD immunity, 25 kV.
Supports the scanned entry of... |
Connectors
|
|
|
Fluke 80i-110s AC/DC Current Clamp
|
|
Current Range: 0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading
Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
Bandwidth: 1Hz to 20kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 1.8 mm (.46 inch) diameter
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II,... |
Current Clamps
|
|
|
Fluke 90i-610s 1A to 600A AC/DC Current Probe
|
|
Current Range: 1 to 600 A DC or AC Peak
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
|
Current Clamps
|
|
|
Fluke i1000s AC Current Probe
|
|
Current Range: 100mA to 1000 Arms
Basic Accuracy 48Hz to 65Hz:
10A Range +/- 3% of reading + 0.1A, 100mV/A output
100A Range +/- 2% of reading + 0.5A, 10mV/A output
1000A Range +/- 1% of reading + 1A, 1mV/A output
Bandwidth: 5Hz to 100kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 54 mm (2.13 inch) diameter
Safety Rating: 600V rms. CAT III per IEC 1010-02-032
|
Current Clamps
|
|
|
Fluke i1000s AC Current Probe
|
|
Current Range: 100mA to 1000 Arms
Basic Accuracy 48Hz to 65Hz:
10A Range +/- 3% of reading + 0.1A, 100mV/A output
100A Range +/- 2% of reading + 0.5A, 10mV/A output
1000A Range +/- 1% of reading + 1A, 1mV/A output
Bandwidth: 5Hz to 100kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 54 mm (2.13 inch) diameter
Safety Rating: 600V rms. CAT III per IEC 1010-02-032
|
Current Clamps
|
|
|
Fluke i1010 AC/DC Current Clamp
|
|
Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; ac current from 1-600A ac rms
Measures ac and dc current down to 1 amp with specified accuracy and is useable to 0.5A
Output is 1 mV per amp dc or ac
Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 X 500 MCM (2 X 25 mm/.98 in.)
AC and DC accuracy: ± (2.0% of reading + 0.5A)
|
Current Clamps
|
|
|
Fluke i1010 Kit AC/DC Current Clamp and Carry Case Kit
|
|
i1010 1-600A AC rms, 1-1000A DC Current Clamp
Zippered vinyl carry case with moveable divider
|
Current Clamps
|
|
|
Fluke i200 Small AC Current Clamp
|
|
Companion to a DMM to measure up to 200 A AC
1mA per Amp output guarantees easy reading on you meter
Take accurate current readings without breaking the circuit
Max. conductor Ø 20 mm
CAT III 600V safety rating
|
Current Clamps
|
|
|
Fluke i2000-Flex AC Flexible Current Clamp
|
|
Three ranges: 20A, 200 A & 2000 A, 1 mV, 10 mV & 100 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 178 mm
CAT III 600V safety rating
|
Current Clamps
|
|
|
Fluke i200s AC Current Clamp
|
|
Companion to your scopemeter, power quality meter or digital multimeter to measure up to 200 A AC
Included adapter for DMM's
Two ranges: 20 A & 200A, 10 or 100 mV/ Amp output
Take accurate current readings without breaking the circuit
Max. conductor Ø 20 mm
CAT III 600V safety rating
|
Current Clamps
|
|
|
Fluke I2500-10 IFlex Flexible Current Probe - 10"
|
|
Expands the measurement range to 2500A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
CAT IV 600 V, CAT III 1000 V
7.5 mm coil diameter allows measurement in tight spaces
Ergonomic design allows easy operation with one hand
1.8 m (6 ft) cable
Three-year warranty
|
Current Clamps
|
|
|
Fluke I2500-18 IFlex Flexible Current Probe - 18"
|
|
Expands the measurement range to 2500A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
CAT IV 600 V, CAT III 1000 V
7.5 mm coil diameter allows measurement in tight spaces
Ergonomic design allows easy operation with one hand
1.8 m (6 ft) cable
Three-year warranty
|
Current Clamps
|
|
|
Fluke i3000s AC Current Clamp
|
|
An optional accessory for use with Fluke DMMs, PowerMeters and ScopeMeter test tools
Measures ac current from 1A to 2400A RMS continuous
PM9081/001 BNC to banana adapter included
|
Current Clamps
|
|
|
Fluke i30 AC/DC Current Clamp
|
|
The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current
The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement
|
Current Clamps
|
|
|
Fluke i3000 Flex-4PK AC Current Probe, 4 Pack
|
|
Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 178 mm (7 in.)
CAT III 600V safety rating
|
Current Clamps
|
|
|
Fluke i3000s Flex 24 AC Current Clamp 610mm (24in.)
|
|
Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 178 mm (7 in.)
CAT III 600V safety rating
|
Current Clamps
|
|