|
Fluke 90i-610s 1A to 600A AC/DC Current Probe
|
|
Current Range: 1 to 600 A DC or AC Peak
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
|
Automotive Accessories
|
|
|
Fluke BP120MH Rechargeable Ni-Cad Battery Pack
|
|
Nominal Voltage: 4.8V
Capacity: 1800 mAh
|
Batteries, Charges and Adapters
|
|
|
Fluke 884X-ETH Ethernet Interface Cable
|
|
8-conductor (4 twisted pair) unshielded cable (48 inches) with an 8-position modular plug (RJ45) on each end, with an overmold boot/strain relief
Rated working voltage: 100 V rms maximum
Operating temperature range: -40 ºC to +80 ºC
|
Cables & Hardware
|
|
|
Fluke C115 Soft Carrying Case
|
|
Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.
Durable polyester 600D case construction for long life.
Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
One-year warranty.
|
Cases and Holsters
|
|
|
Fluke 700-IV Current Shunt
|
|
Very accurate current shunt to use for verification and calibration of process control loops.
Can be used with accurate voltmeters for calibration purposes
Can be used with Fluke 74X series in mA/mA applications (74X will display mA/mA automatically) One year warranty
|
Connectors
|
|
|
Fluke 80i-110s AC/DC Current Clamp
|
|
Current Range: 0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading
Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
Bandwidth: 1Hz to 20kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 1.8 mm (.46 inch) diameter
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II,... |
Current Clamps
|
|
|
Fluke FOM Fiber Optic Meter
|
|
The compact FOM plugs into your DMM and makes testing in tight spaces easy
A variety of light sources (FOS 850, FOS 1300, and FOS 850/1300) and patch cords (ST to ST, ST to FC, ST to SC, ST to SMA) let you get just what you need for testing different cable types and lengths
Highly accurate readings mean less work, less repeated testing
Input connector: fixed ST
Battery life: 16 hours minimum, 9V alkaline
LED low battery indicator
Operating temperature: 0°C to +40°C (32°F to... |
Fiber Optics
|
|
|
Fluke CO-205 Aspirator Kit
|
|
The CO-205 accessory kit includes:
Stainless steel sampling tube
Industrial-grade hand operated aspirator to draw flue sample
Easy to replace particulate filter
Specially designed nose cap for connection to the Fluke CO-210/220
4' (1.2m) hose length
|
Gas Measurement
|
|
|
Fluke 80K-6 High Voltage Probe
|
|
A high voltage probe that allows a multimeter to measure up to 6,000V respectively.
Intended for low energy applications only
One year warranty
|
High Voltage Probes
|
|
|
Fluke L200 Probe Light
|
|
Small, rugged light easily attaches to any Fluke test probe
Bright white LED illuminates contact area
Frees both hands for work
120 hours of battery life
Uses 2 3-volt watch batteries
|
Lights for Probes and Hats
|
|
|
Fluke 050-CLKT 2" (50mm) Infrared (IR) Window with Kwik Twist Cover
|
|
Viewing aperture diameter: 43 mm (1.7 in)
Viewing aperture area: 1452 mm2 (2.25 sq in)
Engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles
Certified by UL & CSA for Type 3/12 (Outdoor) environments in North America and Canada, the C-Range windows are tested to withstand the long term aging effects of UV exposure
Certified by SIRA Certification IP65 (Outdoor) environments in Europe
The CLIRVU coating—exclusive to Hawk IR Windows—seals the optic prior to... |
Infrared (IR) Windows
|
|
|
Fluke Priority Gold Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years.
Priority Gold CarePlan features
One to Three year extended warranty coverage beyond your original factory warranty
Loaner camera on extended repair
One NIST traceable calibration included... |
Instrument CarePlans (for Thermal Imagers)
|
|
|
Fluke BB120 Shielded Banana to Female BNC Adapter
|
|
Maximum Signal Voltage: 300V rms CAT III per IEC 1010-02-031
Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031
|
Options
|
|
|
Fluke 700P00 Differential Module
|
|
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Rugged urethane molded case protects the module from rough handling and harsh conditions
Features internal temperature compensation from 0°C to 50°C for full-accuracy performance
Includes NIST-traceable calibration certificate
Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source
One year warranty
|
Pressure
|
|
|
Fluke Y8846D and Y8846S Rack Mount Kits
|
|
Enables mounting two meters side-by-side in a standard 19-inch rack |
Rack Mounts
|
|
|
Fluke 700G/TRACK Data Logging Software for the 700G Pressure Test Gauges
|
|
Enables data download and logging configurations to the 700G Series gauges for a remote logging event
Configure logging event reading rate, duration and measurement units
Upload measurements logged remotely and display or export measurements
Includes communication cable for connection to a PC and CD-Rom user manual
|
Software
|
|
|
Fluke 80PJ-EXT Extension Wire Kit
|
|
Extending and repairing J-type thermocouple wires
Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors
Maximum continuous exposure temperature: 260ºC
80PJ-EXT is designed for J-type thermometers
One year warranty
|
Specialty Accessories
|
|
|
Fluke 3583R Split-Core Current Transformers
|
|
Current range: 0.01 – 10A
Accuracy: 1% RDG +/- 0.5% FS
Frequency response: 5 kHz
Length: 7/16” (1 cm)
|
Split-Core Current Transformers
|
|
|
Fluke 80PK-1 Type K Bead Probe
|
|
For general purpose applications
Teflon tape insulation
Not suitable for liquid immersion
Shipped with the 80TK, Fluke 50 Series
Measurement range: -40 °C to 260 °C (-40 °F to 500 °F)
Accuracy: ± 1.1 °C (2.0 °F) over the range of 0°C to 260°C (32°F to 500°F)
Maximum Temperature of Insulation: 260°C (500°F)
|
Temperature Accessories
|
|
|
Fluke 85RFII 500V High Frequency Probe
|
|
Voltage Range: 0.25 to 30V rms
Maximum Input Voltage: 30V rms, 200V dc
AC to DC Ratio: 1:1
Ratio Accuracy (At 25 MHz and loaded with 10 M ohm)
Above 0.5V: +/- 0.5 dB
Below 0.5V: +/- 1.0 dB
Add +/- 0.2 dB in RF fields of 1 to 3 V/m
Frequency Response (Relative to 25 MHz):
100KHz to 100 MHz +/- 0.5 dB
100 MHz to 200 MHz +/- 2.0 dB
200 MHz to 500 MHz +/- 3.0 dB
|
Test Leads, Probes, Clips
|
|