|
DKK-TOA CM-20J
|
|
Easy-to-read LCD display
AC/DC 2-way power supply
SI unit display supported (S/m and S/cm)
Cost-effective designed in a compact size
Meas. range
0 - 20.00 S/m |
Conductivity Meter
|
|
|
DKK-TOA MM-60R
|
|
2-Channel model with automatic sensor identification ● Allows for connections of pH/ORP/ion/conductivity/dissolved O2 sensors to either channel ● 0.01/0.001 pH display switchable ● Large color graphic LCD display ● JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement ● USB (Host) and LAN equipped as standard specification ● External printer connectable ● Multiple samples measurement (turntable connection)... |
Multi-Function Water Quality Meter
|
|
|
DKK-TOA AUT-701
|
|
Dual system allows for 2-channel simultaneous titration
Strong&Float high performance electrodes
USB(Host) and LAN equipped as standard specification
Validation supporting function
Turntable, auto-sampling system and etc. connectable
|
Automatic Titrator
|
|
|
DKK-TOA TA-70 / TS-70 / TP-70
|
|
Acidity / Salinity / Potentiometric TItrator TA-70 / TS-70 / TP-70
Simplified system and specified titrators series
Electrodes for trace amount titration available
Turntable connectable
Data management with external-connected printer(optional)
|
Automatic Titrator
|
|
|
DKK-TOA ABT-511
|
|
Automatic Burette ABT-511
Precising dispensing system (stable quantitation and speed)
Titration burette (manual titration) supported
GLP compliance
Sampling mode loaded(measure/dilution)
RS-232 equipped as standard specification
|
Automatic Titrator
|
|
|
DKK-TOA IA-300
|
|
6 cations or 7 anions simultaneous measurement
Simple and easy-to-use for any user
Results automatically analyzed and calculated internally
Displayable and printable results
Suppressor method available for anion measurements
Measurement items
Anions: PO43-, F-, Cl-, NO2-, Br-, NO3-, SO42- Cations: Li+, Na+, NH4+, K+, Mg2+, Ca2+ |
Ion Analyzer
|
|
|
DKK-TOA ICA-2000 Series
|
|
Compact main unit holding up to 3 pumps and 2 detector units
Simple system expansion by optional combined pump-detector unit installation
Remote data monitoring capability due to LAN based main unit/PC control signal connection
PC linked pos+/neg- ion 2-channel real-time chromatograph data display and report printout
Non-metal pump for post column reactor is available
Meet a wide range of water supply measurement needs such as cyanide/bromate, chlorate, etc.
High sensitivity analysis... |
Ion Chromatograph
|
|
|
DKK-TOA SU-300
|
|
Sugar Analyzer SU-300
Simple pretreatment
Simultaneous measurement of 5 kinds of sugar and ethanol, or 7 kinds of sugar alcohol
Pulse amperometric method employed
Automatic analysis and calculation without PC
Front operation and easy maintenance
|
Food-Related Analyzers
|
|
|
DKK-TOA SAT-500
|
|
Salinity Analyzer SAT-500
Simple operation-just inject the sample into electrolyte in dedicated beaker
Rapid measurement-approx. 25 seconds from measurement start to data output for a standard 1% NaCl standard solution
Capable of stable measurements without effect from artificial colorings
Meas. range
0.0000 - 49.99% |
Food-Related Analyzers
|
|
|
DKK-TOA MM-60R
|
|
2-Channel model with automatic sensor identification
Allows for connections of pH/ORP/ion/conductivity/dissolved O2 sensors to either channel
0.01/0.001 pH display switchable
Large color graphic LCD display
JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement
USB (Host) and LAN equipped as standard specification
External printer connectable
Multiple sample measuring capability (turntable connection)
Data storage up to 300... |
Dissolved Oxygen Meter
|
|
|
DKK-TOA COD-60A
|
|
The integrated oxidation & titration design and the sequence control function simplified operations
Smaller waste solution (lower than 10mL per measurement)
Real time display of sequence and titration curve
Meas. range
0 - 20.0/40.0/100/200/400/1000 mg/L |
Simplified COD Meter
|
|
|
DKK-TOA AF-100
|
|
Enables bacteria and cell measurements in 50 sec.
Highly sensitive measurement at 1 - 1000 cells/mL level
Enables direct measurement of membrane filter
Compliant to sanitary management by swap test
Useful functions such as ATP concentration and cell converted value available
Automatic reagent dispenser is optional (DF-10 sold separately)
|
ATP Analyzer
|
|
|
DKK-TOA HDM-135A(2-wire)/HDM-136A(4-wire)
|
|
Industrial pH Transmitter HDM-135A(2-wire)/HDM-136A(4-wire)
Easy-to-use pH analyzer for field installation in a compact and rigid aluminum enclosure
Easier calibration done with standard solution
Auto determination of electrode deterioration
Alterable output range
Automated self-diagnosis of fault (burn-out output)
Meas. range
-1 - 14
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HDM-137A(2-wire)/HDM-138A(4-wire)
|
|
Industrial ORP Transmitter HDM-137A(2-wire)/HDM-138A(4-wire)
Easy-to-use ORP analyzer for field installation in a compact and rigid aluminum enclosure
Automatic check done with standard solution
Auto-detection of electrode deterioration
Alterable output range
Automated self-diagnosis of fault (burn-out output)
Meas. range
-2000 - +2000mV
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HBM-165H(2-wire)
|
|
pH / ORP Transmitter with HART Interface HBM-165H(2-wire)
HART communication protocol interface with a 2-wire, 24 VDC circuit
Available for both pH and ORP measurements
Diecast aluminum enclosure, digital display and a wide range of other useful features
One-touch auto calibration
Self-diagnostic function
Meas. range
-1.00 - 15.00 ORP -2000 - 2000 mV
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HBM-160/HBM-162(4-wire)
|
|
Industrial pH/ORP Transmitter HBM-160/HBM-162(4-wire)
Multi-function pH/ORP analyzer for field installation in a compact aluminum diecast enclosure
One-touch calibration and various self-diagnostic functions
2-point contact signal and 2-channel output including temperature (RS-232 optional)
Power supply: AC90~264V, 50/60Hz
Meas. range
pH meter (HBM-160) : pH -1 - 15 ORP meter (HBM-162) : ORP -2000 - +2000mV
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HC-G70 (KCl Replenish-Free/Refillable) / HC-G72 (KCl Refillable)
|
|
Immersion Type Holder for Replaceable Tip Electrode HC-G70 (KCl Replenish-Free/Refillable) / HC-G72 (KCl Refillable)
HC-G70: Transparent PVC holder (heat resistance: 60 degrees C) and semi-transparent PP holder (heat resistance: 80 degrees C) available
HC-G72: SUS316 holder (heat resistance: 80 degrees C)
Length: 0.5 - 3.0m
KCl refillable type stores KCl inside the holder
Mounting bracket/flange available
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HC-G95 (KCl Replenish-Free)
|
|
Drop-In Type Detector for Replaceable Tip Electrode HC-G95 (KCl Replenish-Free)
Two selections: throw-in type for deep tanks or drop-in type with a protection pipe
Made from transparent PVC (heat resistance: 60 degrees C)
SUS protection pipe (maximum length: 5 m) and mounting bracket available
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HC-G80 (KCl Replenish-Free/Refillable) / HC-G82 (KCl Replenish-Free/Refillable)
|
|
Flow-Through Type Holder for Replaceable Tip Electrodes HC-G80 (KCl Replenish-Free/Refillable) / HC-G82 (KCl Replenish-Free/Refillable)
HC-G80: Transparent holders made of PVC (heat resistance: 60 degrees C) ; maximum pressure resistance: 0.15MPa
HC-G82: PP/SUS316 part (heat resistance: 80 degrees C) and PVDF/SUS316 part (heat resistance: 100 degrees C) ; maximum pressure resistance: 0.3 MPa
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA PHC-7D
|
|
Immersion Type Sensor with Pulse Air Jet Cleaner PHC-7D
Immersion type pH/ORP electrode holder combined with pulse air jet cleaner
Cleaning by high-speed water stream created by the rapid expansion of pulse-jetted compressed air in the sample water
High cleaning effect due to air bubbles present in the water stream randomly hitting the electrode
No consumables required, such as reagents, brushes
|
Transmitter for Industrial pH/ORP Analyzer
|
|