|
DKK-TOA XAT-200 series
|
|
Process analyzer for automating analytical techniques such as atomic absorption and etc.
Suitable for automating chemical analysis processes such as distillation, heat treatment, etc.
Example applications:
*Total chromium *Total cyanide by atomic absorption/distillation *Phenols by atomic absorption/distillation *Total mercury by oxidation-reduction atomic absorption |
Automatic Process Analyzer
|
|
|
DKK-TOA WDM-135A (2-wire) / WDM-136A (4-wire)
|
|
Industrial Conductivity Transmitter WDM-135A (2-wire) / WDM-136A (4-wire)
Easy-to-use conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Wide application range from ultra-pure water to wastewater
Alterable output range
Meas. range
Minimum: 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm |
Transmitter for Industrial Conductivity Analyzer
|
|
|
DKK-TOA WBM-210A
|
|
Compact DIN 96 size
Conductivity meter with built-in microcomputer for various applications such as ultra-pure water production, boiler plants, foodstuff plants, etc.
Two detectors connectable
RS-232 equipped as standard specification
Output: 2-channel, insulated, 4 - 20mA
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm
|
Panel Type Conductivity Analyzer
|
|
|
DKK-TOA WBM-165H (2-wire)
|
|
Conductivity Transmitter with HART Interface WBM-165H (2-wire)
HART communication protocol interface with a 2-wire, 24 VDC circuit
Aluminum diecast enclosure, digital display and a wide range of other useful features
One-touch auto calibration
Self-diagnostic function
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm
|
Transmitter for Industrial Conductivity Analyzer
|
|
|
DKK-TOA WBM-160 (4-wire)
|
|
Industrial Conductivity Transmitter WBM-160 (4-wire)
Multi-function conductivity analyzer for field installation in a compact aluminum diecast enclosure
Wide application range from ultrapure water to wastewater
2-point contact signal, 2-channel output including temperature (RS-232 optional)
Power supply: AC90 - 264V, 50/60Hz
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm |
Transmitter for Industrial Conductivity Analyzer
|
|
|
DKK-TOA WBM-121A / AK Cell
|
|
Sanitary Type Conductivity Analyzer/Detector WBM-121A / AK Cell
Compact DIN 96 size
Designed for sanitary conductivity analyzer for the food industry
Applied in foodstuff plants and installed in pipes and tanks. Best suited for CIP (stationary cleaning) management, debubbling agent control and liquid level management
Meas. range
0 - 300/3000 μS/cm (at 25 degrees C) 0 - 20/200 mS/cm (at 25 degrees C)
|
Panel Type Conductivity Analyzer
|
|
|
DKK-TOA WBM-100
|
|
Compact DIN 96 size
Temperature compensation computed by a microcomputer
Cell constant value adjustable depends on customers' need
Water temperature displayable
Power supply: AC90 - 264V, 50/60Hz
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm
|
Panel Type Conductivity Analyzer
|
|
|
DKK-TOA UHC-7C / UHC-8C
|
|
Flow-Through Type Detector with Ultrasonic Cleaner UHC-7C / UHC-8C
Detectors composed of holder and ultrasonic cleaner: Immersion type (UHC-7C) and flow-through type (UHC-8C)
One-touch detachable holder enables quick calibration and easy maintenance
Compatible with GSS series
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA U-32 / U-42(Explosion proof type)
|
|
Controller (For Oil Refineries) U-32 / U-42(Explosion proof type)
Intelligent controller best suited for use with FPA, PPA and CPA
Applicable to multi-stream system, interactive data entry via display & automatic calibration
Auto-calibration, self-diagnostic, remote control, communication function equipped
|
Controller
|
|
|
DKK-TOA U-221
|
|
Alternative model to existing controller such as U-22, U-02, etc.
Same panel cut size, easy installation
Interactive input interface supports auto-calibration and multi-stream
Auto-calibration, self-diagnostic, remote control, communication function equipped
|
Controller
|
|
|
DKK-TOA TUI-100
|
|
Turbidity Meter with Integrating Sphere TUI-100
Integrating sphere system employed for lab turbidity measurements
Continuous measurement of turbidity in tap water, river water, industrial water, etc.
Accurate results for minimized influence of color
Meas. range
0 - 0.5/5 to 0 - 100/1000 Cell length: 50mm or 10mm (selectable) (mg/L, ppm, FTU, NTU)
|
Turbidity Analyzer
|
|
|
DKK-TOA TUH-1600
|
|
High Sensitivity Turbidity Analyzer TUH-1600
Highly-sensitive turbidity analyzer suitable for water purification process
Surface scattering light method employed; 1 range/2 ranges/3 ranges available
RS-485 equipped as standard specification; compatible with Modbus communication system
Freely mountable on walls, racks, etc. for the compact lightweight design
Meas. range
0 - 0.2 to 0 - 2.0 (1 - 3 ranges) (NTU)
|
Turbidity Analyzer
|
|
|
DKK-TOA TUF-1600
|
|
Suitable for water purification process (including river water, etc.)
Surface scattering light method employed; 1 range/2 ranges/3 ranges available
Reduces flow volume of sample water to 1/2 of existing models
RS-485 equipped as standard specification; compatible with Modbus communication system
Freely mountable on walls, racks, etc. for the compact lightweight design
Meas. range
0 - 2 to 0 - 2000 (1 - 3 ranges) (mg/L, ppm, FTU, NTU)
|
Turbidity Analyzer
|
|
|
DKK-TOA SSF-1600
|
|
Continuous optical measurements of SS and MLSS by using infrared scattering method
Safe and simple maintenance attainable with the small, lightweight stainless detector
Meas. range
0 - 1000/3000 mg/L 0 - 10000/20000/30000 mg/L (2-ranges or 3-ranges)
|
Suspended Solids Concentration Analyzer
|
|
|
DKK-TOA SSD-1610(For Low Concentration)/SSD-1620(For Medium Concentration)
|
|
Compact and piston automated analyzer
Types of detectors available: immersion, drop-in and pipe insertion
Long-life optical model and high reliability
RS-485 interface equipped as standard specification; compatible with Modbus communication system
Meas. range
SSD-1610: 0 - 30/500/1000 mg/L SSD-1620: 0 - 5000/10000/20000 mg/L (3-range, manual switching)
|
Suspended Solids Concentration Analyzer
|
|
|
DKK-TOA SOD-35D (2-Wire Transmitter) SOC-71 (Sensor)
|
|
Polarograph type DO analyzer with intrinsically safe explosion-proof function (combined with a Zener Barrier)
Alterable output range
Types of detectors available: immersion, flow-through and fermentation-used (electrodes: ELD-017/ELD-019)
Meas. range
Minimum : 0 - 1 mg/L Maximum: 0 - 20 mg/L
|
Intrinsically Safe Explosion-Proof Type DO Transmitter
|
|
|
DKK-TOA SHBM-161 / 163 (2-wire)
|
|
Compact diecast aluminum enclosure
ExiallCT4 (combined with a Zener Barrier) explosion-proof and IP65 conformed enclosure
Easy calibration done with standard solution
Auto-detection of electrodes deterioration
Alterable output range
Meas. range
SHBM-161: pH; -1 - 15 SHBM-163: ORP; -2000 - +2000 mV
|
Intrinsically Safe Explosion-Proof Type Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA SCU-02
|
|
Adopts environmental friendly Freon replacement gas
Automatic temperature adjustment
Safety apparatus equipped such as overload relay and current overload breaker
Explosion-proof TIIS ExpdⅡBT4 certified
|
Explosion-Proof Type Cooler
|
|
|
DKK-TOA SCA-200
|
|
Designed for oil refinery
Batch and continuous measurement of sulfur concentration of petroleum products like light and heavy oil
Best suited for product and quality control of petroleum products
Eliminates RI regulation process and enhances safety by using the compact and X-ray tube
Meas. range
0~0.1 wt% 0~5 wt%
|
Process Sulfur Content Analyzer
|
|
|
DKK-TOA RHC-7C / RHC-7EC
|
|
Immersion Type Detector with Chemical Cleaner RHC-7C / RHC-7EC
Immersion type electrode holder combined with chemical cleaning system
By spraying mixed air&cleaning agents onto the electrode tip it dissolves fouling away
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|