Products

GasDNA

  • Filter
  Name SKU Description Category
GAS DNA Wireless Indoor Air Quality Monitor IAQ-700 IAQ-700 is a high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust. Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee. After install indoor Watch (software), it enable to collect data at a long distance. Relay Contact make it possible to interwork with a ventilating system. It has been installed to measure Air quality of indoor or underground spaces like Factories, schools,... Gas Detector
GAS DNA Water-cooling jacket Bracket Bracket is to fix infrared thermometer. Accessories
GAS DNA Water-cooling jacket Water-cooling jacket is to use under the high temperature environment. It makes infrared thermometer cool down and working properly. It can be applicable to IR-40, IR-80, IR-80-H, 2S-IR-100, 2IGA-IR-100 Accessories
GAS DNA TS-60 Non contact Temperature + Smoke Detector TS-60 is built-in Non contact Infrared thermometer and smoke sensor. The most of existing temperature and smoke sensors in markets can detect fire after the heat reach to temperature and smoke detector. However, TS-60 detects the fire by increased infrared amount and low concentrated smoke in early stage of the fire and enables to prevent the fire in advance. Smoke sensor
GAS DNA SS-100 Two color Non-Contact Fixed Pyrometer SS-100 two color(Si/Si) non-contact infrared thermometer measures the infrared wavelength emitted from the target and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from 800 ℃ to maximum 2400℃ in the distance of 80:1 D:S (Distance to Spot). Emissivity is 0.10 ~ 0.99 adjustable. Two built-in laser pointers can aim at the target. Fixed Infrared thermometer
GAS DNA SD-50 Smoke sensor SD-50, the smoke detector with built-in micro processor, receiving signal from sensor and comparing it with preset alarming value, if it exceeds, transmits the relay output to be connected to PLC/DDC. Usually, the other smoke detectors designed only for fire alarm cannot be used for industrial use because it cannot secure enough accuracy and stability. However, SD-50 accommodating highest accurate ionization sensor and industrial detector technology, secures best accuracy and stability at the... Smoke sensor
GAS DNA SD-110 2-Channel Smoke sensor SD-110 is a microprocessor internal 2-channel smoke detector. SD-110 is an environment-adaptive smoke detector which displays the concentration on the back light LCD by receiving the serial signals from two sensors and by processing them in the digital mode, and performs the variety of local functions in digital process mode. Also, it can ensure the effective remote control by stably outputting the analog serial signals to external control unit such as PLC/DDC. As one of big advantages of... Smoke sensor
GAS DNA PIR550 Non-Contact Portable Infrared thermometer The thermometer is a non-contact infrared thermometer. It can measure from -60 to 550 ℃ (-76~1022 ºF) in the distance of 75:1 DS (Distance to Spot) ratio There are many mathematical modes for the Infrared function Portable Infrared thermometer
GAS DNA PIR2400 Non-Contact Portable Infrared thermometer The non-contact infrared thermometer is the ultimate tool for temperature measurements. It can measure from 200 to 2400 ℃ (392 to 4352 ºF) in the distance of 100:1 DS (Distance to Spot) ratio. Furthermore, the memory mode can record and display the specific measurement with emissivity. There are many mathematical modes for the Infrared function. [ Specification ] Item Non-contact Infrared Scan function Thermocouple Probe Scan function (K type; a bead wire... Portable Infrared thermometer
GAS DNA PIR1500 Non-Contact Portable Infrared thermometer The non-contact infrared thermometer is the ultimate tool for temperature measurements. It can measure from -35 to 1500 ℃ (-31~2732 ºF) in the distance of 75:1 DS (Distance to Spot) ratio. Furthermore, the memory mode can record and display the specific measurement with emissivity. There are many mathematical modes for the Infrared function. Portable Infrared thermometer
GAS DNA IR-Compact Non-Contact subminiature Fixed Infrared Thermometer IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA) and RS-485 communication signal output. It can measure from -60℃ to maximum 350℃ in the distance of 8:1 D:S (Distance to Spot) Emissivity is 0.10 ~ 0.99 adjustable. IR-Compact can monitor the temperature in real time in site through its infrared sensor part and signal processing module. Fixed Infrared thermometer
GAS DNA IR-80-H Non-Contact Fixed Infrared Thermometer IR-80-H non-contact infrared thermometer measures the infrared wavelength emitted from the target and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from 500 ℃ to maximum 1700℃ in the distance of 80:1 D:S (Distance to Spot). Emissivity is 0.10 ~ 0.99 adjustable. Two built-in laser pointers can aim at the target. Fixed Infrared thermometer
GAS DNA IR-80 Non-Contact Fixed Infrared Thermometer IR-80 non-contact infrared thermometer measures the infrared wavelength emitted from the target and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from 500 ℃ to maximum 1700℃ in the distance of 80:1 D:S (Distance to Spot). Emissivity is 0.10 ~ 0.99 adjustable. Two built-in laser pointers can aim at the target. IR-80 is composed of sensor & controller. The measurement temperature displays on LCD in controller. Various... Fixed Infrared thermometer
GAS DNA IR-40 Non-Contact Fixed Infrared Thermometer IR-40 non-contact infrared thermometer measures the infrared wavelength emitted from the target and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from -20 ℃ to maximum 1000℃ in the distance of 40:1 D:S (Distance to Spot). Emissivity is 0.10 ~ 0.99 adjustable. Two built-in laser pointers can aim at the target. Fixed Infrared thermometer
GAS DNA IR-21 Non-Contact Fixed Infrared Thermometer IR-21 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from 0 ℃ to maximum 400℃ in the distance of 12:1 D:S(Distance to Spot). Fixed Infrared thermometer
GAS DNA IR-20-4W Non-Contact Fixed Infrared Thermometer IR-20 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from 0 ℃ to maximum 400℃ in the distance of 10:1 D:S (Distance to Spot). Emissivity is 0.95 (fixed). Fixed Infrared thermometer
GAS DNA IR-20 Non-Contact Fixed Infrared Thermometer IR-20 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from 0 ℃ to maximum 400℃ in the distance of 10:1 D:S (Distance to Spot). Emissivity is 0.95 (fixed). Fixed Infrared thermometer
GAS DNA GMS1500 4-Channel digital controller for gas detector GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can... Digital Controller
GAS DNA GMS1000 Single -Channel digital controller for gas detector GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... Digital Controller
GAS DNA GMS 2000 Multi-channel digital controller for gas detector GMS-2000 is multi-channel digital controller to monitor gas leakages from more than one gas detectors simultaneously. GMS-2000 is composed of one alarming unit & more than one receiving units. While each receiving units in GMS-2000 receive density signals from external gas detectors, when the density becomes higher than alarm value, receiving units automatically give signal to alarming unit to sound alarm. GMS-2000 transmits the relay output and standard current output signal 4-20㎃ to... Digital Controller