Pin-type

Wood/Cement/Bricks

  • Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete, vertical hole brick and solid brick
  • Measurement depth up to 5 cm
  • Handy shape for optimum contact pressure
  • Hold, max., min. function
  • Illuminated digital display
  • Characteristics curves were developed in cooperation with the LPI institut
  • Advantageous for measurements on exotic woods: non-destructive determination of wood moisture

Order number:

TST0100 (Without ambient humidity and temperature)

TST0101 (With ambient humidity and temperature)

606-1; wood and material moisture meter, incl. protective cap, batteries and calibration protocol

606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials.

  • Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple
  • Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
  • Hold function for easy readout of readings
  • Display illumination
  • Self-test function
  • Protective cap for safe storage
  • Belt case, wrist strap and calibration protocol included
  • Made in Germany
  • Latest technology

 

Storage temperature -40 to +70 °C
Operating temperature -10 to +50 °C
Battery type 2 batteries Type AAA
Battery life 200 h
Weight 90 g
Dimensions 119 x 46 x 25 mm
Probe type Conductive measurement cell
Meas. Range 0 to 50 %
Accuracy ±1 %
Resolution 0.1

Additional benefits for TST0101:

  • Measurement of temperature and humidity in ambient air
  • Air humidity measurement with the long-term stable Testo humidity sensor
  • Incl. dewpoint calculation and wet bulb

 

 

TST0269
TST0269, wood and material moisture measuring instrument, incl. battery and calibration protocol
The TST0269 allows fast and non-destructive observation of the material moisture of woods and building materials. This allows the ideal time and place for any destructive measurement which may be necessary to be determined. The display is in percent by weight in comparison to the dry mass of the material. The TST0269 makes work easier for all those who need to observe the development of drying in floors, walls and surfaces.

  • Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete, vertical hole brick and solid brick
  • Measurement depth up to 5 cm
  • Handy shape for optimum contact pressure
  • Hold, max., min. function
  • Illuminated digital display
  • Characteristics curves were developed in cooperation with the LPI institut
  • Advantageous for measurements on exotic woods: non-destructive determination of wood moisture

Storage temperature

-20 to +70 °C

Operating temperature

+5 to +40 °C

Battery type

9V block battery, 6F22

Battery life

60 h

Weight

260 g

Dimensions

70 x 58 x 234 mm

Material/Housing

ABS/TPE/Metal

 

 

Probe type humid. sensor, cap.

Resolution

0.1

 

AddThis Social Bookmark Button

Additional information