Welcome to Meter.com.my!

Sub Categories

  • Filter
  Name SKU Description Category
TEN007-TM-2013V3 TRMS AC/DC CLAMP METER ACA DCA 660A CAT IV 600V, CAT III 1000V LCD backlit display, with maximum reading of 6600. AC voltage range: 0 to 750V. AC current range: 0 to 660A. DC voltage range: 0 to 1000V. DC Current: 0 to 660A. Resistance measurement to 66 megohms. Data Hold, Min/Max, Autoranging, DCA Zero. Test Ranges: ACV, ACA, Resistance, Frequency, Diode, Continuity. Work light. Auto Power Off. Double Injection outer case. Clamp meters
TEN008-TM-1016V3 AC-HVAC VOLT/AMP/TEMP CLAMP METER WITH TEMPERATURE CAT III 600V 3-3/4 digit LCD Backlit Display, with Analog Bargraph. Display Counts: 4000. Auto Ranging. AC/DC current: 0.1µA to 4000µA. (using test leads). AC current: 0.01A to 400A (using jaw measurement). Ranges: ACV, ACA, DCV, DCA, Resistance, Continuity, Capacitance, and Temperature. Maximum conductor size 30mm. Continuity test below 40 ohms, buzzer will sound. Auto Power off. Double injection outer case. Clamp meters
TEN010-TM-1017V3 400A TRUE-RMS AC POWER CLAMP METER + PHASE ROTATION CAT III 600V Maximum conductor size 30mm. Display counts: 4000. Measures: ACV, DCV, ACA. Measures Phase Sequence. Voltage/Current Harmonics to 25th with THD. W3ø, HV, HA, Phase SEQ, Audible continuity tests. Frequency to 400Hz. Active, Reactive, Apparent power/ energy on. Power Factor, cosø on Single/Three phase systems. Phase sequence. Clamp meters
SEW0063-29404CLV3 SLIM AC CLAMP METER ACV750 DCV1000 ACA1000 ● Pocket size. ● 4000 counts. ● Full automatic measurement.    Voltage measurement.    Current measurement.    Resistor measurement. ● Data hold function. ● Continuity check. ● Diode measurement. ● Select function. ● Low battery indication. ● Auto off function. ● Flashlight (Auto off in 1 minute). Clamp meters
TEN011-400A-AC/DC Current Transducer   Product Description CAT III 600V AC/DC current ranges 40A and 400A. Maximum conductor size 30mm. Low battery indication. Clamp meters
635-2AA dew point meter(compressed air)-Germany -TST0106+TST0223 Must buy TST0106 with TST0223(0636 9836) (-60c dew point temp) humidity/temperature measuring instrument with measurement value store, PC software and USB-cable incl. battery and calibration protocol Measurement of air moisture, material equilibrium moisture, pressure dew point Instrument memory for up to 10,000 readings PC software for analysis, filing and documentation of measurement data Dew point meters
ALM11** AMT - Dewpoint Transmitter Model AMT - Dewpoint Transmitter 2 Wire Loop Powered Dewpoint Transmitter Overall Range -120°C to +20°C Dewpoint Accuracy ± 2°C Dewpoint AUTOMATIC CALIBRATION Can be Configured for Linear 4-20mA signal in:°C & °F Dewpoint, ppm(v), ppb(v), g/m3, lb/MMSCF Temperature Compensation Failure Diagnostics Long Term Stability Fast Reponse IP 66 / NEMA4X Protection Supplied with Calibration Certificate Traceable to National & International Humidity Standards Model AMT... Dew point meters
ALM12** AMT-EX - Dewpoint Transmitter AMT-Ex Intrinsically Safe 4-20mA Transmitter 3 Wire Intrinsically Safe Dewpoint Transmitter Ex II 1GD Ex ia IIC T4 Ex iaD 20 T135°C (-20°C ≤ Ta ≤ +60°C) Overall Range: -120°C to +20°C Dewpoint Accuracy ± 2°C Dewpoint AUTOMATIC CALIBRATION Can be configured for Linear 4-20mA signal in: °C & °F Dewpoint, ppm(v), g/m3, lb/MMSCF Temperature Compensation Failure Diagnostics Long Term Stability Fast Response IP66 / NEMA4X Protection Model AMT-Ex Dewpoint Hygrometeris... Dew point meters
ALM13** ADHT Ex Ex-Proof Dewpoint Transmitter Model ADHT Ex - Dewpoint Transmitter 3 Wire, 24V, 4-20mA Dewpoint Transmitter Intrinsically safe - ATEX II 1G / Ex ia IIC T6 Ga Various Ranges: Overall Range -110ºC to +20ºC dewpoint Accuracy ±2ºC Dewpoint Weatherproof Rating IP65 Open/Short Circuit Detection Built-in temperature compensation Supplied with Calibration Certificate Traceable to National & International Humidity Standards The Alpha Moisture Systems Model ADHT-Ex is a 3 wire, 24V powered 4-20mA dewpoint... Dew point meters
CS1200 FA 410 from -80 to 20°Ctd dew point transmitters FA 410 - the ideal dew point sensor for monitoring membrane and adsorption dryers. Typical use in compressed air dryers/granulate dryers at very low dew points to -80°C. Special features Measuring range -80...20°Ctd Extremely long-term stable Analogue output 4...20 mA Condensation insensitive Quick response time Pressure-tight up to 350 bar (special version) Dew point meters
CS2200 CS DP520 -80C PORTABLE MEASURING INSTRUMENTS FOR DEW POINT With the DP 500 CS Instruments has combined next generation measurement technology with state-of the art user interface design. The experienced user knows that dew point measurement also requires the measurement of line pressure, since dew point is pressure dependent. With the DP 500 the line pressure is measured in combination with the dew point, so the user can be confident that the calculation is accurate and free from human error. Unique features of the DP 500 / DP 520 Pro:1. Similar to... Dew point meters
MEG0016-DET3TD THREE POLE EARTH TESTING KIT Features: IP54 rated 2 and 3 point testing Selectable 25 V or 50 V output Complete with lead and stake kit Simple one button operation Hardwearing carry case Delivered with calibration certificate Included Accessories: 1 - Hard Carrying Case 1 - Stake & Wire Kit Earth clamp meters/Earth resistance testers
INS0010-5KV AC/IR INSULATION WITHSTANDING/HIPOT TESTER *0.1 to 5 kV AC Hipot/AR IR (all models) *Insulation Resistance True RMS Current Readback *Test Time 1 to 180 Sec or Continuous *Arc Detection *3 Ranges of Adjustable Out Off Current *Simultaneous Digital Display for Voltage, Current and Timer *Zero Turn-On Operating Switch Automatic FAIL Indicator with Alarm Lamp and Buzzer *9-Pin Remote Control for START, RESET *Voltage Output Adjustable During Test Period 1-Year Warranty Hipot testers/Electrical Safety Analysers
INS0013-5KV AC/DC HIPOT TESTER (0.2~5KV,0.3~100MA) *5000V AC, 5000V DC *True RMS Current read-back *Arc Detection *Zero Crossing Turn-On *3 ranges of adjustable cut-off current *Digital display for voltage, current and timer at same time *Automatic FAIL indicator of alarm lamp and buzzer *Remote control for START, RESET, and Pass/Fail *Voltage output adjustable during test period 1-Year Warranty Hipot testers/Electrical Safety Analysers
SEW0058- BASIC APPLIANCE/PLUG WIRING CHECKER(PRIMETEST) FEATURES ● This a simplified Version of an appliance tester which use    low voltage and low current to perform it's checks.● Application Example   The appliance is plugged into the mini appliance checker, then the   probe make contact with the protective conductor.● Other appliance checking   Washing Machine Toaster Iron Dish Washer   Stove    ... Hipot testers/Electrical Safety Analysers
CIA009 AIRFORCE 200x USB Digital Microscope w/ Measurement Functions The Microscopic world is brought alive by the DVMC-500  - an  amazing, easy to use high  resolution USB handheld  powered  digital microscope with up to 200x magnification.  DMVC-500 features functions such as additional Cross Line, Scale, Timer, Measurement in length, area, diameter, angle as well as USB2.0 high speed access, high resolution up to 1.30M pixel excellent images & videos, independently developed display software for Snapshot, Video Record, ... Microscope